Journal articles
Journal articles
2021
Friess, Karel ; Izák, Pavel ; Kárászová, Magda ; Pasichnyk, Mariia ; Lanč, Marek ; Nikolaeva, Daria ; Luis Alconero, Patricia ; Jansen, Johannes Carolus. A Review on Ionic Liquid Gas Separation Membranes. In: Membranes, Vol. 11, no.2, p. 97 (2021). doi:10.3390/membranes11020097.
2021
Ding, Lipeng ; Zhao, Lv ; Weng, Yaoyao ; Schryvers, Dominique ; Liu, Qing ; Idrissi, Hosni. Atomic-scale investigation of the heterogeneous precipitation in the E (Al18Mg3Cr2) dispersoid of 7075 aluminum alloy . In: Journal of Alloys and Compounds, Vol. 851, p. 156890 (2021). doi:10.1016/j.jallcom.2020.156890.
2021
Lezaack, Matthieu Baudouin ; Simar, Aude. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments. In: Materials Science and Engineering: A, Vol. 807, p. 140901 (2021). doi:10.1016/j.msea.2021.140901.
2021
Samaee, Vahid ; Dupraz, Maxime ; Pardoen, Thomas ; Van Swygenhoven, Helena ; Schryvers, Dominique ; Idrissi, Hosni. Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal. In: Nature Communications, Vol. 12, no.1, p. 962 (2021). doi:10.1038/s41467-021-21296-z.
2021
Marteleur, Matthieu ; Leclerc, Julien ; Colla, Marie-Stéphane ; Nguyen, Van-Dung ; Noels, Ludovic ; Pardoen, Thomas. Ductile fracture of high strength steels with morphological anisotropy, Part I: Characterization, testing, and void nucleation law. In: Engineering Fracture Mechanics, Vol. 244, p. 107569 (2021). doi:10.1016/j.engfracmech.2021.107569.
2021
Gheysen, Julie ; Marteleur, Matthieu ; van der Rest, Camille ; Simar, Aude. Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy. In: Materials & Design, Vol. 199, p. 109433 (2021). doi:10.1016/j.matdes.2020.109433.
2021
Voleppe, Quentin ; Ballout, Wael ; Van Velthem, Pascal ; Bailly, Christian ; Pardoen, Thomas. Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient. In: Polymer, Vol. 218, p. 123497 (2021). doi:10.1016/j.polymer.2021.123497.
2021
De Wilde, Juray. NWGD Jaarsymposium. In: Bulk Solid Processing and Handling, Vol. 1 (2021).
2021
Jamil Ur Rahman, Umair ; Krzysztof Pozarlik, Artur ; Tourneur, Thomas ; de Broqueville, Axel ; De Wilde, Juray ; Brem, Gerrit. Numerical Study toward Optimization of Spray Drying in a Novel Radial Multizone Dryer. In: Energies, Vol. 14, no.5, p. 1233 (2021). doi:10.3390/en14051233.
2021
Ismail, Karim ; Perlade, Astrid ; Jacques, Pascal ; Pardoen, Thomas. Outstanding cracking resistance of fibrous dual phase steels. In: Acta Materialia, Vol. 207, p. 116700 (2021). doi:10.1016/j.actamat.2021.116700.
2021
Bahrami, Farzaneh ; Hammad, Mohammed ; Fivel, Marc ; HUET, Benjamin ; D'Haese, Cécile ; Ding, L. ; Nysten, Bernard ; Idrissi, Hosni ; Raskin, Jean-Pierre ; Pardoen, Thomas. Single layer graphene controlled surface and bulk indentation plasticity in copper. In: International Journal of Plasticity, Vol. 138, no.March 2021, p. 102936 (2021). doi:10.1016/j.ijplas.2021.102936.
2021
Samae, Vahid ; Cordier, Patrick ; Demouchy, Sylvie ; Bollinger, Caroline ; Gasc, Julien ; Koizumi, Sanae ; Mussi, Alexandre ; Schryvers, Dominique ; Idrissi, Hosni. Stress-induced amorphization triggers deformation in the lithospheric mantle. In: Nature, Vol. 591, p. 82-86 (2021). doi:10.1038/s41586-021-03238-3.
2021
Zhao, Lv ; Santos Macias, Juan Guillermo ; Douillard, Thierry ; Li, Zhenhuan ; Simar, Aude. Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions. In: Materials Science and Engineering: A, Vol. 807, p. 140845 (2021). doi:10.1016/j.msea.2021.140845.
2020
Fan, Ningsong ; Cizek, Jan ; Huang, Chunjie ; Xie, Xinliang ; Chlup, Zdenek ; Jenkins, Richard ; Lupoi, Rocco ; Yin, Shuo. A new strategy for strengthening additively manufactured cold spray deposits through in-process densification. In: Additive Manufacturing, , p. 101626 (2020). doi:10.1016/j.addma.2020.101626 (Accepté/Sous presse).
2020
Nguyen, Van-Dung ; Pardoen, Thomas ; Noels, Ludovic. A nonlocal approach of ductile failure incorporating void growth, internal necking, and shear dominated coalescence mechanisms. In: Journal of the Mechanics and Physics of Solids, Vol. 137, p. 103891 (2020). doi:10.1016/j.jmps.2020.103891.
2020
Khiara, Nargisse ; Onimus, Fabien ; Dupuy, Laurent ; Kassem, Wassim ; Crocombette, Jean-Paul ; Pardoen, Thomas ; Raskin, Jean-Pierre ; Bréchet, Yves. A novel displacement cascade driven irradiation creep mechanism in α-zirconium: A molecular dynamics study. In: Journal of Nuclear Materials, Vol. 541, p. 152336 (2020). doi:10.1016/j.jnucmat.2020.152336.
2020
Li, J. S. ; Raoelison, R. N. ; Sapanathan, Thaneshan ; Zhang, Z. ; Chen, X. G. ; Marceau, D. ; Hou, Y. L. ; Rachik, M.. An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. In: Applied Physics Letters, Vol. 116, no.16, p. 161601 (2020). doi:10.1063/5.0005299.
2020
Lumbeeck, Gunnar ; Delvaux, Adeline ; Idrissi, Hosni ; Proost, Joris ; Schryvers, Dominique. Analysis of internal stress build-up during deposition of nanocrystalline Ni thin films using transmission electron microscopy. In: Thin Solid Films, Vol. 707, p. 138076 (2020). doi:10.1016/j.tsf.2020.138076.
2020
Terentyev, D. ; Vilémová, Monika ; Yin, Chao ; Veverka, Jakub ; Dubinko, Andrii ; Matějíček, Jiří. Assessment of mechanical properties of SPS-produced tungsten including effect of neutron irradiation. In: International Journal of Refractory Metals and Hard Materials, Vol. 89, p. 105207 (2020). doi:10.1016/j.ijrmhm.2020.105207.
2020
Prihatiningtyas, Indah ; Hartanto, Yusak ; Ballesteros, Maria Sandra Reyes ; Van der Bruggen, Bart. Cellulose triacetate/LUDOX‐SiO2 nanocomposite for synthesis of pervaporation desalination membranes. In: Journal of Applied Polymer Science, Vol. online, p. 50000 (2020). doi:10.1002/app.50000.
2020
Zhao, Lv ; Santos Macias, Juan Guillermo ; Dolimont, Adrien ; Simar, Aude ; Rivière-Lorphèvre, Edouard. Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. In: Additive Manufacturing, Vol. 36, p. 101499 (2020). doi:10.1016/j.addma.2020.101499.
2020
Gérardy, Romaric ; Debecker, Damien P. ; Estager, Julien ; Luis Alconero, Patricia ; Monbaliu, Jean-Christophe. Continuous Flow Upgrading of Selected C2−C6 Platform Chemicals Derived from Biomass. In: Chemical Reviews, Vol. 120, p. 7219–7347 (2020).
2020
Zhukova, Maria ; Kotipalli, Ratan ; Poncelet, Olivier ; Samain, Louise ; Fourdrinier, Lionel ; Flandre, Denis. Correlation and optimization of the optoelectrical properties of DC magnetron-sputtered Cu2ZnSnS4 absorber layer as a function of the material composition. In: Materials Science in Semiconductor Processing, Vol. 121, no. 105367, p. 1-11 (2021). doi:10.1016/j.mssp.2020.105367.
2020
Poncelet, Olivier ; Marteleur, Matthieu ; van der Rest, Camille ; Rigo, O. ; Adrien, J. ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion. In: Additive Manufacturing, Vol. 38, no.0N/A, p. 101801 (2021). doi:10.1016/j.addma.2020.101801.
2020
Proost, Joris. Critical assessment of the production scale required for fossil parity of green electrolytic hydrogen. In: International Journal of Hydrogen Energy, Vol. 45, no. 35, p. 17067-17075 (2020). doi:10.1016/j.ijhydene.2020.04.259.
2020
Samaee, Vahid ; Sandfeld, Stefan ; Idrissi, Hosni ; Groten, Jonas ; Pardoen, Thomas ; Schwaiger, Ruth ; Schryvers, Dominique. Dislocation structures and the role of grain boundaries in cyclically deformed Ni micropillars. In: Materials Science and Engineering: A, Vol. 769, p. 138295 (2020). doi:10.1016/j.msea.2019.138295.
2020
Yin, Chao ; Terentyev, Dmitry ; Zhang, Tao ; Nogami, Shuhei ; Antusch, Steffen ; Chang, Chih-Cheng ; Petrov, Roumen H. ; Pardoen, Thomas. Ductile to brittle transition temperature of advanced tungsten alloys for nuclear fusion applications deduced by miniaturized three-point bending tests. In: International Journal of Refractory Metals and Hard Materials, Vol. 95, p. 105464 (2021). doi:10.1016/j.ijrmhm.2020.105464.
2020
Sparenberg, Marie-Charlotte ; Ruiz Salmón, Israel ; Luis Alconero, Patricia. Economic evaluation of salt recovery from wastewater via membrane distillation-crystallization. In: Separation and Purification Technology, Vol. 235, p. 116075 (2020). doi:10.1016/j.seppur.2019.116075.
2020
Bahamonde Soria, Raul Alfonso ; Zhu, Junyong ; Gonza, Irma ; Van der Bruggen, Bart ; Luis Alconero, Patricia. Effect of (TiO2: ZnO) ratio on the anti-fouling properties of bio-inspired nanofiltration membranes. In: Separation and Purification Technology, Vol. 251, p. 117280 (2020). doi:10.1016/j.seppur.2020.117280.
2020
Naceri, Salah. E. ; Izerrouken, M. ; Sari, A. ; Ryelandt, S. ; Menchi, O. ; Ghamnia, M.. Effect of 165-keV Ar-ion irradiation on microstructural and mechanical properties of zircaloy-4. In: Journal of Radioanalytical and Nuclear Chemistry, Vol. 323, no.2, p. 817-824 (2020). doi:10.1007/s10967-019-07007-5 (Soumis).
2020
Yin, Chao ; Terentyev, D ; Van Dyck, S ; Stankovskiy, A ; Petrov, R.H. ; Pardoen, Thomas. Effect of high temperature neutron irradiation on fracture toughness of ITER-specification tungsten. In: Physica Scripta : an international journal for experimental and theoretical physics, Vol. T171, p. 014052 (2020).
2020
Delvaux, Adeline ; Lumbeeck, Gunnar ; Idrissi, Hosni ; Proost, Joris. Effect of microstructure and internal stress on hydrogen absorption into Ni thin film electrodes during alkaline water electrolysis. In: Electrochimica Acta, Vol. 340, p. 135970 (2020). doi:10.1016/j.electacta.2020.135970.
2020
Scarcello, Eleonora ; Lobysheva, Irina ; Bouzin, Caroline ; Jacques, Pascal ; Lison, Dominique ; Dessy, Chantal. Endothelial dysfunction induced by hydroxyl radicals – the hidden face of biodegradable Fe-based materials for coronary stents. In: Materials Science and Engineering: C, Vol. 112, p. 110938 (2020). doi:10.1016/j.msec.2020.110938.
2020
Jin, Pengrui ; Zhu, Junyong ; Yuan, Shushan ; Zhang, Gang ; Volodine, Alexander ; Tian, Miaomiao ; Wang, Jianxiu ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Erythritol-based polyester loose nanofiltration membrane with fast water transport for efficient dye/salt separation. In: Chemical Engineering Journal, Vol. 406, p. 126796 (2021). doi:10.1016/j.cej.2020.126796.
2020
Simar, Aude ; Hannard, Florent ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Pyka, Grzegorz. Extended durability for high strength aluminium alloys. In: The Innovation Patform, Vol. on line (2020).
2020
Heidarzadeh, A. ; Mironov, S. ; Kaibyshev, R. ; Çam, G. ; Simar, Aude ; Gerlich, A. ; Khodabakhshi, F. ; Mostafaei, A. ; Field, D.P. ; Robson, J.D. ; Deschamps, A. ; Withers, P.J.. Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution. In: Progress in Materials Science, (2020). doi:10.1016/j.pmatsci.2020.100752 (Accepté/Sous presse).
2020
Choisez, Laurine ; Ding, Lipeng ; Marteleur, Matthieu ; Idrissi, Hosni ; Pardoen, Thomas ; Jacques, Pascal. High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy. In: Nature Communications, Vol. 11, no.1, p. 2110 (2020). doi:10.1038/s41467-020-15772-1.
2020
Scarcello, Eleonora ; Herpain,A. ; Tomatis, M. ; Turci, F. ; Jacques, Pascal ; Lison, Dominique. Hydroxyl radicals and oxidative stress: the dark side of Fe corrosion. In: Colloids and Surfaces B: Biointerfaces, Vol. 185, p. 110542 (2020). doi:10.1016/j.colsurfb.2019.110542.
2020
Yin, Chao ; Terentyev, Dmitry ; Zhang, Tao ; Petrov, Roumen H. ; Pardoen, Thomas. Impact of neutron irradiation on the strength and ductility of pure and ZrC reinforced tungsten grades. In: Journal of Nuclear Materials, Vol. 537, p. 152226 (2020). doi:10.1016/j.jnucmat.2020.152226.
2020
Idrissi, Hosni ; Samaee, Vahid ; Lumbeeck, Gunnar ; van der Werf, Thomas ; Pardoen, Thomas ; Schryvers, Dominique ; Cordier, Patrick. In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope. In: Journal of Geophysical Research: Solid Earth, Vol. 125, no.3, p. e2019JB018383 (2020). doi:10.1029/2019jb018383.
2020
Santos Macias, Juan Guillermo ; Douillard, Thierry ; Zhao, Lv ; Maire, Eric ; Pyka, Grzegorz ; Simar, Aude. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg. In: Acta Materialia, Vol. 201, p. 231-243 (2020). doi:10.1016/j.actamat.2020.10.001.
2020
Champagne, Aurélie ; Ricci, Francesco ; Barbier, M. ; Ouisse, T. ; Magnin, Delphine ; Ryelandt, Sophie ; Pardoen, Thomas ; Hautier, Geoffroy ; Barsoum, M. W. ; Charlier, Jean-Christophe. Insights into the elastic properties of RE-i-MAX phases and their potential exfoliation into two-dimensional RE-i-MXenes. In: Physical Review Materials, Vol. 4, no. 1, p. 013604 (2020). doi:10.1103/physrevmaterials.4.013604.
2020
Li, J.S. ; Raoelison, R.N. ; Sapanathan, Thaneshan ; Hou, Y.L. ; Rachik, M.. Interface evolution during magnetic pulse welding under extremely high strain rate collision: mechanisms, thermomechanical kinetics and consequences. In: Acta Materialia, Vol. 195, p. 404-415 (2020). doi:10.1016/j.actamat.2020.05.028.
2020
Simar, Aude. Lightening the load of aluminium alloys. In: EU Researcher, Vol. Summer 2020, p. 59 (2020).
2020
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Soete, Jeroen ; Pyka, Grzegorz ; Simar, Aude. Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach. In: Journal of Materials Processing Technology, Vol. 283, p. 116722 (2020). doi:10.1016/j.jmatprotec.2020.116722.
2020
Scarcello, Eleonora ; Lambremont, Alexia ; Vanbever, Rita ; Jacques, Pascal ; Lison, Dominique. Mind your assays: Misleading cytotoxicity with the WST-1 assay in the presence of manganese. In: PLOS ONE, Vol. 15, no.4, p. e0231634 (2020). doi:10.1371/journal.pone.0231634.
2020
Minette, Florent ; De Wilde, Juray. Multi-scale modeling and simulation of low-pressure methane bi-reforming using structured catalytic reactors. In: Chemical Engineering Journal, Vol. 407, p. 127218 (2021). doi:10.1016/j.cej.2020.127218.
2020
Lefebvre, Williams ; Rose, Grégory ; Delroisse, Pauline ; Baustert, Eric ; Cuvilly, Fabien ; Simar, Aude. Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy. In: Materials & Design, Vol. 197, p. 109264 (2021). doi:10.1016/j.matdes.2020.109264.
2020
van der Rest, Camille ; Dupont, Vedi ; Erauw, Jean-Pierre ; Jacques, Pascal. On the reactive sintering of Heusler Fe2VAl-based thermoelectric compounds. In: Intermetallics, Vol. 125, p. 106890 (2020). doi:10.1016/j.intermet.2020.106890.
2020
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. On the sensitivity of fracture mechanism to stress concentration configuration in a two-step quenching and partitioning steel. In: International Journal of Fracture, Vol. 224, no. 1, p. 101-116 (2020). doi:10.1007/s10704-020-00448-0.
2020
Tie, Ying ; Hou, Yuliang ; Li, Cheng ; Meng, Liang ; Sapanathan, Thaneshan ; Rachik, Mohamed. Optimization for maximizing the impact-resistance of patch repaired CFRP laminates using a surrogate-based model. In: International Journal of Mechanical Sciences, Vol. 172, no. 105407 (2020). doi:10.1016/j.ijmecsci.2019.105407.
2020
Tuyaerts, Romain ; Raskin, Jean-Pierre ; Proost, Joris. Opto-electrical properties and internal stress in Al:ZnO thin films deposited by direct current reactive sputtering. In: Thin Solid Films, Vol. 695, no.137760, p. 8 pages (2020). doi:10.1016/j.tsf.2019.137760.
2020
Jin, Pengrui ; Yuan, Shushan ; Zhang, Gang ; Zhu, Junyong ; Zheng, Junfeng ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Polyarylene thioether sulfone/sulfonated sulfone nanofiltration membrane with enhancement of rejection and permeability via molecular design☆. In: Journal of Membrane Science, Vol. 608, p. 118241 (2020). doi:10.1016/j.memsci.2020.118241.
2020
Cristóvão, M.B. ; Janssens, Raphaël ; Yadav, A. ; Pandey, S. ; Luis Alconero, Patricia ; Van der Bruggen, B. ; Dubey, K.K. ; Mandal, M.K. ; Crespo, J.G. ; Pereira, V.J.. Predicted concentrations of anticancer drugs in the aquatic environment: What should we monitor and where should we treat?. In: Journal of Hazardous Materials, Vol. 392, p. 122330 (2020). doi:10.1016/j.jhazmat.2020.122330.
2020
Minette, Florent ; de Almeida, Luis Calamote ; Ratan, Sanjiv ; De Wilde, Juray. Pressure drop and heat transfer of ZoneFlowTM structured catalytic reactors and reference pellets for Steam Methane Reforming. In: Chemical Engineering Journal, , p. 128080 (2020). doi:10.1016/j.cej.2020.128080 (Accepté/Sous presse).
2020
Gayot, Sarah ; Bailly, Christian ; Pardoen, Thomas ; Gérard, Pierre ; Van Loock, Frederik. Processing maps based on polymerization modelling of thick methacrylic laminates. In: Materials & Design, Vol. 196, p. 109170 (2020). doi:10.1016/j.matdes.2020.109170.
2020
Li, Wenqi ; Estager, Julien ; Monbaliu, Jean‐Christophe M ; Debecker, Damien P. ; Luis Alconero, Patricia. Separation of bio‐based chemicals using pervaporation. In: Journal of Chemical Technology & Biotechnology, Vol. 95, no.9, p. 2311-2334 (2020). doi:10.1002/jctb.6434.
2020
Zeng, Xi ; Zhukova, Maria ; Faniel, Sébastien ; Proost, Joris ; Flandre, Denis. Structural and Opto‑electronic characterization of CuO thin films prepared by DC reactive magnetron sputtering. In: Journal of Materials Science: Materials in Electronics, Vol. 31, p. 4563-4573 (2020). doi:10.1007/s10854-020-03007-4.
2020
Li, Wenqi ; Molina-Fernández, Cristhian ; Estager, Julien ; Monbaliu, Jean-Christophe M. ; Debecker, Damien P. ; Luis Alconero, Patricia. Supported ionic liquid membranes for the separation of methanol/dimethyl carbonate mixtures by pervaporation. In: Journal of Membrane Science, Vol. 598, p. 117790 (2020). doi:10.1016/j.memsci.2019.117790.
2020
Xie, Xinliang ; Tan, Zhanqiu ; Chen, Chaoyue ; Xie, Yingchun ; Wu, Hongjian ; Yan, Xingchen ; Gao, Shuohong ; Li, Zhiqiang ; Ji, Gang ; Liao, Hanlin. Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition. In: Surface and Coatings Technology, Vol. 405, p. 126676 (2021). doi:10.1016/j.surfcoat.2020.126676.
2020
Ding, Lipeng ; Raskin, Jean-Pierre ; Lumbeeck, Gunnar ; Schryvers, Dominique ; Idrissi, Hosni. TEM investigation of the role of the polycrystalline-silicon film/substrate interface in high quality radio frequency silicon substrates. In: Materials Characterization, Vol. 161, p. 110174 (2020). doi:10.1016/j.matchar.2020.110174.
2020
Walschot, Maureen ; Luis Alconero, Patricia ; Liegeois, Michel. The challenges of reverse osmosis desalination: solutions in Jordan. In: Water International, Vol. 45, no. 2, p. 112-124 (2020). doi:10.1080/02508060.2020.1721191.
2020
Li, Y. ; Morgan, T.W. ; Terentyev, D. ; Ryelandt, Sophie ; Favache, Audrey ; Wang, S. ; Wirtz, M. ; Hoefnagels, J.P.M. ; van Dommelen, J.A.W. ; De Temmerman, G. ; Verbeken, K. ; Geers, M.G.D.. Three mechanisms of hydrogen-induced dislocation pinning in tungsten. In: Nuclear Fusion, Vol. 60, no.8, p. 086015 (2020). doi:10.1088/1741-4326/ab98a4.
2020
Nikolaeva, Daria ; Luis Alconero, Patricia. Top-Down Polyelectrolytes for Membrane-Based Post-Combustion CO2 Capture. In: Molecules, Vol. 25, no.2, p. 323 (2020). doi:10.3390/molecules25020323.
2020
Prihatiningtyas, Indah ; Hartanto, Yusak ; Van der Bruggen, Bart. Ultra-high flux alkali-treated cellulose triacetate/cellulose nanocrystal nanocomposite membrane for pervaporation desalination. In: Chemical Engineering Science, Vol. on line, p. 116276 (2020). doi:10.1016/j.ces.2020.116276.
2020
Delannay, Francis ; Brassart, Laurence. Variational analysis of the influence of grain shape anisotropy on shear viscosity in Nabarro-Herring-Coble creep. In: Mechanics of Materials, Vol. 143, p. 103312 (2020). doi:10.1016/j.mechmat.2020.103312.
2020
Nikolaeva, Daria ; Loïs, Sandrine ; Dahl, Paul Inge ; Sandru, Marius ; Jaschik, Jolanta ; Tanczyk, Marek ; Fuoco, Alessio ; Jansen, Johannes Carolus ; Vankelecom, Ivo F.J.. Water Vapour Promotes CO2 Transport in Poly(ionic liquid)/Ionic Liquid-Based Thin-Film Composite Membranes Containing Zinc Salt for Flue Gas Treatment. In: Applied Sciences, Vol. 10, no.11, p. 3859 (2020). doi:10.3390/app10113859.
2019
Leclerc, Julien ; Nguyen, Van-Dung ; Pardoen, Thomas ; Noels, Ludovic. A micromechanics-based non-local damage to crack transition framework for porous elastoplastic solids. In: International Journal of Plasticity, Vol. 127, p. 102631 (2019). doi:10.1016/j.ijplas.2019.11.010.
2019
Raoelison, Rija Nirina ; Li, Jishuai ; Sapanathan, Thaneshan ; Padayodi, Essole ; Buiron, Nicolas ; Racine, Dany ; Zhang, Zhan ; Marceau, Daniel ; Rachik, Mohamed. A new nature of microporous architecture with hierarchical porosity and membrane template via high strain rate collision. In: Materialia, Vol. 5, p. 100205 (2019). doi:10.1016/j.mtla.2018.100205.
2019
Sapanathan, Thaneshan ; Jimenez-Mena, Norberto ; Sabirov, Ilchat ; Monclús, Miguel A. ; Molina-Aldareguia, Jon ; Xia, Peikang ; Zhao, Lv ; Simar, Aude. A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. In: Journal of Materials Science & Technology, Vol. 35, no. 9, p. 2048-2057 (2019). doi:10.1016/j.jmst.2019.05.004.
2019
Hardy, Baptiste ; De Wilde, Juray ; Winckelmans, Grégoire. A penalization method for the simulation of weakly compressible reacting gas-particle flows with general boundary conditions. In: Computers & Fluids, Vol. 190, p. 294-307 (2019). doi:10.1016/j.compfluid.2019.06.016.
2019
Sang Sefidi, Vida ; Luis Alconero, Patricia. Advanced Amino Acid-Based Technologies for CO2 Capture: A Review. In: Industrial & Engineering Chemistry Research, Vol. 58, no.44, p. 20181-20194 (2019). doi:10.1021/acs.iecr.9b01793.
2019
Bhowmick, Sanjit ; Espinosa, Horacio ; Jungjohann, Katherine ; Pardoen, Thomas ; Pierron, Olivier. Advanced microelectromechanical systems-based nanomechanical testing: Beyond stress and strain measurements. In: MRS Bulletin, Vol. 44, no.06, p. 487-493 (2019). doi:10.1557/mrs.2019.123.
2019
Maloberti, Olivier ; Mansouri, Omar ; Jouaffre, Denis ; Hamzaoui, Mohammed ; Derosiere, Jimmy ; Buiron, Nicolas ; Sansen, Pascal ; Sapanathan, Thaneshan ; Pelca, Philippe ; Rachik, Mohamed ; Leonard, Jean-Paul ; Lembrouck, Gregory ; Haye, Dominique ; Macret, Antoine. Analytical Design Model of Coil Parameters for the Electro-Magnetic Forming Technology – Case of the 1-Turn coil dedicated to tubular parts forming and crimping with 1D approximation. In: Journal of Materials Processing Technology, Vol. 266, p. 450-473 (2019). doi:10.1016/j.jmatprotec.2018.07.016.
2019
Idrissi, Hosni ; Ghidelli, Matteo ; Béché, Armand ; Turner, Stuart ; Gravier, Sébastien ; Blandin, Jean-Jacques ; Raskin, Jean-Pierre ; Schryvers, Dominique ; Pardoen, Thomas. Atomic-scale viscoplasticity mechanisms revealed in high ductility metallic glass films. In: Scientific Reports, Vol. 9, no.1, p. 13426 (2019). doi:10.1038/s41598-019-49910-7.
2019
Verhaegen, Carole ; Lepropre, Sophie ; Octave, Marie ; Brusa, Davide ; Bertrand, Luc ; Beauloye, Christophe ; Jacques, Pascal ; Kefer, Joëlle ; Horman, Sandrine. Bioreactivity of Stent Material: <i>In Vitro</i> Impact of New Twinning-Induced Plasticity Steel on Platelet Activation. In: Journal of Biomaterials and Nanobiotechnology, Vol. 10, no.04, p. 175-189 (2019). doi:10.4236/jbnb.2019.104010.
2019
Brassart, Laurence ; Delannay, Francis. Bounds for shear viscosity in Nabarro–Herring–Coble creep. In: Mechanics of Materials, Vol. 137, p. 103106 (2019). doi:10.1016/j.mechmat.2019.103106.
2019
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 50, p. 3502-3513 (2019). doi:10.1007/s11661-019-05265-2.
2019
Irda, Nadia ; Ribesse, Arnaud ; Ismail, Karim ; Miladi, Lotfi ; Jacques, Pascal ; Pardoen, Thomas ; Mousny, Maryline. Characterization of fracture mechanisms occurring in vivo in growing rods: how can it help in clinical practice?. In: Spine, (2019) (Soumis).
2019
Dadi, D. ; Daba, G. ; Beyene, A. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Composting and co-composting of coffee husk and pulp with source-separated municipal solid waste: a breakthrough in valorization of coffee waste. In: International Journal of Recycling of Organic Waste in Agriculture, Vol. 8, no.3, p. 263-277 (2019). doi:10.1007/s40093-019-0256-8.
2019
Janssens, Raphaël ; Cristovao, M.B. ; Bronze, M.R. ; Crespo, J.G. ; Pereira, V.J. ; Luis Alconero, Patricia. Coupling of nanofiltration and UV, UV/TiO2 and UV/H2O2 processes for the removal of anti-cancer drugs from real secondary wastewater effluent. In: Journal of Environmental Chemical Engineering, Vol. 7, no.5, p. 103351 (2019). doi:10.1016/j.jece.2019.103351.
2019
Jaddi, Sahar ; Coulombier, Michaël ; Raskin, Jean-Pierre ; Pardoen, Thomas. Crack on a chip test method for thin freestanding films. In: Journal of the Mechanics and Physics of Solids, Vol. 123, p. 267-291 (2019). doi:10.1016/j.jmps.2018.10.005.
2019
Zhao, Lv ; Santos Macias, Juan Guillermo ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. In: Materials Science and Engineering: A, Vol. 764, p. 138210 (2019). doi:10.1016/j.msea.2019.138210.
2019
Sandfeld, Stefan ; Samaee, Vahid ; Idrissi, Hosni ; Groten, Jonas ; Pardoen, Thomas ; Schwaiger, Ruth ; Schryvers, Dominique. Datasets for the analysis of dislocations at grain boundaries and during vein formation in cyclically deformed Ni micropillars. In: Data in Brief, Vol. 27, p. 104724 (2019). doi:10.1016/j.dib.2019.104724.
2019
Yin, Chao ; Terentyev, Dmitry ; Pardoen, Thomas ; Petrov, Roumen ; Tong, Zhenfeng. Ductile to brittle transition in ITER specification tungsten assessed by combined fracture toughness and bending tests analysis. In: Materials Science and Engineering: A, Vol. 750, p. 20-30 (2019). doi:10.1016/j.msea.2019.02.028.
2019
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Van Hooreweder, Brecht ; Adrien, Jérôme ; Maire, Eric ; Buffière, Jean-Yves ; Ludwig, Wolfgang ; Jacques, Pascal ; Simar, Aude. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing. In: Scripta Materialia, Vol. 170, p. 124-128 (2019). doi:10.1016/j.scriptamat.2019.05.044.
2019
Huang, Chunjie ; Yan, Xingchen ; Zhao, Lv ; Liu, Min ; Ma, Wenyou ; Wang, Weibing ; Soete, Jeroen ; Simar, Aude. Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing. In: Materials Science and Engineering: A, Vol. 755, p. 85-96 (2019). doi:10.1016/j.msea.2019.03.133.
2019
Jimenez-Mena, Norberto ; Jacques, Pascal ; Ding, Lipeng ; Gauquelin, Nicolas ; Schryvers, Dominique ; Idrissi, Hosni ; Delannay, Francis ; Simar, Aude. Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers. In: Materials Science and Engineering: A, Vol. 740-741, p. 274-284 (2019). doi:10.1016/j.msea.2018.10.101.
2019
Zhao, Lv ; Ding, Lipeng ; Soete, Jeroen ; Idrissi, Hosni ; Kerckhofs, Greet ; Simar, Aude. Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness. In: Composites Part A: Applied Science and Manufacturing, Vol. 126, p. 105617 (2019). doi:10.1016/j.compositesa.2019.105617.
2019
Tamer, Saadallah ; Mastrobuoni, Stefano ; Van Dyck, Michel ; Navarra, Emiliano ; Bollen, Xavier ; Poncelet, Alain ; Noirhomme, Philippe ; Astarci, Parla ; El Khoury, Gebrine ; de Kerchove, Laurent. Free margin length and geometric height in aortic root dilatation and leaflet prolapse: implications for aortic valve repair surgery. In: European journal of cardio-thoracic surgery, Vol. 57, p. 124-132 (2020). doi:10.1093/ejcts/ezz183.
2019
Roy, Geoffrey ; van der Rest, Camille ; Heymans, Sophie ; Quintin, Emilie ; Dupont, Védi ; Erauw, Jean-Pierre ; Schmitz, Alain ; Jacques, Pascal. Global Analysis of Influence of Contacts on Heusler-Based Thermoelectric Modules. In: Journal of Electronic Materials, Vol. 48, no. 9, p. 5390-5402 (2019). doi:10.1007/s11664-019-07137-2.
2019
Ismail, Karim ; Perlade, Astrid ; Jacques, Pascal ; Pardoen, Thomas ; Brassart, Laurence. Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels. In: International Journal of Plasticity, Vol. 118, p. 130-146 (2019). doi:10.1016/j.ijplas.2019.02.005.
2019
Proost, Joris ; Delvaux, Adeline. In-situ monitoring of hydrogen absorption into Ni thin film electrodes during alkaline water electrolysis. In: Electrochimica Acta, Vol. 322, p. 134752 (2019). doi:10.1016/j.electacta.2019.134752.
2019
Dolci, Francesco ; Thomas, Denis ; Hilliard, Samantha ; Guerra, Carlos Fúnez ; Hancke, Ragnhild ; Ito, Hiroshi ; Jegoux, Mathilde ; Kreeft, Gijs ; Leaver, Jonathan ; Newborough, Marcus ; Proost, Joris ; Robinius, Martin ; Weidner, Eveline ; Mansilla, Christine ; Lucchese, Paul. Incentives and legal barriers for power-to-hydrogen pathways: An international snapshot. In: International Journal of Hydrogen Energy, Vol. 44, no.23, p. 11394-11401 (2019). doi:10.1016/j.ijhydene.2019.03.045.
2019
Miotti Bettanini, Alvise ; Ding, Lipeng ; Mithieux, Jean-Denis ; Parrens, Coralie ; Idrissi, Hosni ; Schryvers, Dominique ; Delannay, Laurent ; Pardoen, Thomas ; Jacques, Pascal. Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel. In: Materials & Design, Vol. 162, p. 362 - 374 (2019). doi:10.1016/j.matdes.2018.12.005. doi:10.1016/j.matdes.2018.12.005.
2019
Bakaev, A. ; Zinovev, Aleksandr ; Terentyev, D. ; Bonny, G. ; Yin, Chao ; Castin, N. ; Mastrikov, Yu. A. ; Zhurkin, E. E.. Interaction of carbon with microstructural defects in a W-Re matrix: An ab initio assessment. In: Journal of Applied Physics, Vol. 126, no.7, p. 075110 (2019). doi:10.1063/1.5094441.
2019
Dépinoy, S. ; Strepenne, F. ; Massart, T.J. ; Godet, S. ; Pardoen, Thomas. Interface toughening in multilayered systems through compliant dissipative interlayers. In: Journal of the Mechanics and Physics of Solids, Vol. 130, p. 1-20 (2019). doi:10.1016/j.jmps.2019.05.013.
2019
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Zhang, Zhan ; Chen, X.-Grant ; Marceau, Daniel ; Simar, Aude ; Rachik, Mohamed. Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics. In: Materials Letters, Vol. 249, p. 177-179 (2019). doi:10.1016/j.matlet.2019.04.094.
2019
Hou, Yuliang ; Tie, Ying ; Li, Cheng ; Sapanathan, Thaneshan ; Rachik, Mohamed. Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations. In: Composites Part B: Engineering, Vol. 163, p. 669-680 (2019). doi:10.1016/j.compositesb.2018.12.153.
2019
Hou, Yuliang ; Cai, Shouyu ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Rachik, Mohamed. Micromechanical modeling of the effect of phase distribution topology on the plastic behavior of dual-phase steels. In: Computational Materials Science, Vol. 158, p. 243-254 (2019). doi:10.1016/j.commatsci.2018.11.025.
2019
Cea, Andrew Ken ; Leenaers, A. ; Van den Berghe, S. ; Pardoen, Thomas. Microstructure and calorimetric analysis of the U Mn binary system. In: Journal of Nuclear Materials, Vol. 514, p. 380-392 (2019). doi:10.1016/j.jnucmat.2018.11.035.
2019
Delannay, Laurent ; Lemoine, Guerric ; Coulombier, Michaël ; Pardoen, Thomas. Modelling creep induced by internal stresses in freestanding submicron Cu film. In: IOP Conference Series: Materials Science and Engineering, Vol. 580, p. 012003 (2019). doi:10.1088/1757-899x/580/1/012003.
2019
Chevalier, Jérémy ; Camanho, P.P. ; Lani, Frédéric ; Pardoen, Thomas. Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy. In: Composite Structures, Vol. 209, p. 160-176 (2019). doi:10.1016/j.compstruct.2018.10.076.
2019
Chevalier, Jérémy ; Morelle, X.P. ; Camanho, P.P. ; Lani, Frédéric ; Pardoen, Thomas. On a unique fracture micromechanism for highly cross-linked epoxy resins. In: Journal of the Mechanics and Physics of Solids, Vol. 122, p. 502-519 (2019). doi:10.1016/j.jmps.2018.09.028.
2019
Mandy, Mélodie ; Georges, Cédric ; Sturel, T. ; Drillet, P. ; Jacques, Pascal. On the analysis of the simultaneous uptake and desorption of different isotopes of gaseous hydrogen by advanced high strength steels. In: Scripta Materialia, Vol. 161, p. 84-87 (2019). doi:10.1016/j.scriptamat.2018.09.034.
2019
Hou, Yuliang ; Tie, Ying ; Li, Cheng ; Meng, Liang ; Sapanathan, Thaneshan ; Rachik, Mohamed. On the damage mechanism of high-speed ballast impact and compression after impact for CFRP laminates. In: Composite Structures, Vol. 229, no. 111435 (2019). doi:10.1016/j.compstruct.2019.111435.
2019
Jimenez-Mena, Norberto ; Simar, Aude ; Jacques, Pascal. On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers. In: Materials & Design, Vol. 180, p. 107958 (2019). doi:10.1016/j.matdes.2019.107958.
2019
Dépinoy, S. ; Massart, T.J. ; Godet, S. ; Pardoen, Thomas. On the mode I toughness of adhesive bonds exhibiting strain-softening and re-hardening. In: International Journal of Solids and Structures, Vol. 162, p. 1-13 (2019). doi:10.1016/j.ijsolstr.2018.11.026.
2019
Marteleur, Matthieu ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Prima, Frédéric ; Schryvers, Dominique ; Jacques, Pascal. On the nucleation mechanism of {112}〈111〉mechanical twins in as-quenched β metastable Ti-12 wt.% Mo alloy. In: Materialia, Vol. 7, p. 100418 (2019). doi:10.1016/j.mtla.2019.100418.
2019
de Radiguès de Chennevières, Quentin ; Thunis, Grégoire ; Proost, Joris. On the use of 3-D electrodes and pulsed voltage for the process intensification of alkaline water electrolysis. In: International Journal of Hydrogen Energy, Vol. 44, p. 29432-29440 (2019).
2019
Hou, Yuliang ; Zhao, Qiaoli ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Rachik, Mohamed. Parameter identifiability of ductile fracture criterion for DP steels using bi-level reduced surrogate model. In: Engineering Failure Analysis, Vol. 100, p. 300-311 (2019). doi:10.1016/j.engfailanal.2019.02.057.
2019
Favache, Audrey ; Daniel, Alain ; Teillet, Aline ; Pardoen, Thomas. Performance indices and selection of thin hard coatings on soft substrates for indentation and scratch resistance. In: Materials and Design, Vol. 176, p. 107827 (2019). doi:10.1016/j.matdes.2019.107827.
2019
Janssens, Raphaël ; Cristóvão, Beatriz M. ; Bronze, Maria R. ; Crespo, Joao G. ; Pereira, Vanessa J. ; Luis Alconero, Patricia. Photocatalysis Using UV-A and UV-C Light Sources for Advanced Oxidation of Anti-Cancer Drugs Spiked in Laboratory-Grade Water and Synthetic Urine. In: Industrial & Engineering Chemistry Research, Vol. 59, no.2, p. 647-653 (2020). doi:10.1021/acs.iecr.9b04608.
2019
Jimenez mena, Norberto ; Sapanathan, Thaneshan ; Drezet, Jean-Marie ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction. In: Journal of Materials Processing Technology, Vol. 266, p. 651-661 (2019). doi:10.1016/j.jmatprotec.2018.11.030.
2019
Chehade, Zaher ; Mansilla, Christine ; Lucchese, Paul ; Hilliard, Samantha ; Proost, Joris. Review and analysis of demonstration projects on power-to-X pathways in the world. In: International Journal of Hydrogen Energy, Vol. 44, no.51, p. 27637-27655 (2019). doi:10.1016/j.ijhydene.2019.08.260.
2019
Ballout, Wael ; Van Velthem, Pascal ; Magnin, Delphine ; Henry, E ; Sclavons, Michel ; Pardoen, Thomas ; Bailly, Christian. Specific influence of polyethersulfone functionalization on the delamination toughness of modified carbon fiber reinforced polymer processed by resin transfer molding. In: Polymer Engineering & Science, Vol. 59, no. 5, p. 996-1009 (2019). doi:10.1002/pen.25055.
2019
Poulain, Raphaël ; Proost, Joris ; Klein, Andreas. Sputter Deposition of Transition Metal Oxides on Silicon: Evidencing the Role of Oxygen Bombardment for Fermi‐Level Pinning. In: physica status solidi (a), Vol. 216, no.23, p. 1900730 (2019). doi:10.1002/pssa.201900730.
2019
Proost, Joris. State‐of‐the art CAPEX data for water electrolysers, and their impact on renewable hydrogen price settings. In: International Journal of Hydrogen Energy, Vol. 44, no. 9, p. 4406-4413 (2019). doi:10.1016/j.ijhydene.2018.07.164.
2019
Delannay, Francis ; Brassart, Laurence. Strain rate dependence of the contribution of surface diffusion to bulk sintering viscosity. In: Journal of the American Ceramic Society, Vol. 102, no. 2, p. 736-747 (2019). doi:10.1111/jace.16058.
2019
Ding, Lipeng ; Orekhov, Andrey ; Weng, Yaoyao ; Jia, Zhihong ; Idrissi, Hosni ; Schryvers, Dominique ; Muraishi, Shiji ; Hao, Longlong ; Liu, Qing. Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography. In: Journal of Materials Science, (2019). doi:10.1007/s10853-019-03427-6.
2019
Bampole, David Lukumu ; Luis Alconero, Patricia ; Mulaba-Bafubiandi, Antoine. F.. Sustainable copper extraction from mixed chalcopyrite–chalcocite using biomass. In: Transactions of Nonferrous Metals Society of China, Vol. 29, no.10, p. 2170-2182 (2019). doi:10.1016/s1003-6326(19)65123-x.
2019
Gérardy, Romaric ; Morodo, Romain ; Estager, Julien ; Luis Alconero, Patricia ; Debecker, Damien P. ; Monbaliu, Jean-Christophe M.. Sustaining the Transition from a Petrobased to a Biobased Chemical Industry with Flow Chemistry. In: Topics in Current Chemistry, Vol. 377, p. 1 (2019). doi:10.1007/s41061-018-0222-3.
2019
Cristóvão, M.B. ; Torrejais, J. ; Janssens, R. ; Luis Alconero, Patricia ; Van der Bruggen, B. ; Dubey, K.K. ; Mandal, M.K. ; Bronze, M.R. ; Crespo, J.G. ; Pereira, V.J.. Treatment of anticancer drugs in hospital and wastewater effluents using nanofiltration. In: Separation and Purification Technology, Vol. 224, no.1, p. 273-280 (2019). doi:10.1016/j.seppur.2019.05.016.
2019
Mallmann, C. ; Hannard, Florent ; Ferrié, E. ; Simar, Aude ; Daudin, R. ; Lhuissier, P. ; Pacureanu, A. ; Fivel, M.. Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites. In: Materials Science and Engineering: A, Vol. 764, p. 138170 (2019). doi:10.1016/j.msea.2019.138170.
2019
Rindt, P. ; Mata González, J. ; Hoogerhuis, P. ; van den Bosch, P. ; van Maris, M. ; Terentyev, D. ; Yin, Chao ; Wirtz, M. ; Lopes Cardozo, N.J. ; van Dommelen, J.A.W. ; Morgan, T.W.. Using 3D-printed tungsten to optimize liquid metal divertor targets for flow and thermal stresses. In: Nuclear Fusion, Vol. 59, no.5, p. 054001 (2019). doi:10.1088/1741-4326/ab0a76.
2019
Gérardy, Romaric ; Estager, Julien ; Luis Alconero, Patricia ; Debecker, Damien P. ; Monbaliu, Jean-Christophe M.. Versatile and scalable synthesis of cyclic organic carbonates under organocatalytic continuous flow conditions. In: Catalysis Science & Technology, Vol. 9, no.24, p. 6841-6851 (2019). doi:10.1039/c9cy01659g.
2018
Hou, Yuliang ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Culière, Pierre ; Rachik, Mohamed. A novel development of bi-level reduced surrogate model to predict ductile fracture behaviors. In: Engineering Fracture Mechanics, Vol. 188, p. 232-249 (2018). doi:10.1016/j.engfracmech.2017.08.021.
2018
Ye, Wenyuan ; Lin, Jiuyang ; Borrego, Ricard ; Chen, Dong ; Sotto, Arcadio ; Luis Alconero, Patricia ; Liu, Minghua ; Zhao, Shuaifei ; Tang, Chuyang Y. ; Van der Bruggen, Bart. Advanced desalination of dye/NaCl mixtures by a loose nanofiltration membrane for digital ink-jet printing. In: Separation and Purification Technology, Vol. 197, no. 1, p. 27-35 (2018). doi:10.1016/j.seppur.2017.12.045.
2018
Tie, Ying ; Hou, Yuliang ; Li, Cheng ; Zhou, Xihui ; Sapanathan, Thaneshan ; Rachik, Mohamed. An insight into the low-velocity impact behavior of patch-repaired CFRP laminates using numerical and experimental approaches. In: Composite Structures, Vol. 190, p. 179-188 (2018). doi:10.1016/j.compstruct.2018.01.075.
2018
Li, Wenqi ; Sreerangappa, Ramesh ; Estager, Julien ; Monbaliu, Jean-Christophe M. ; Debecker, Damien P. ; Luis Alconero, Patricia. Application of pervaporation in the bio-production of glycerol carbonate. In: Chemical Engineering and Processing - Process Intensification, Vol. 132, p. 127-136 (2018). doi:10.1016/j.cep.2018.08.014.
2018
Dadi, Dessalegn ; Mengistie, Embialle ; Terefe, Gudina ; Getahun, Tadesse ; Haddis, Alemayehu ; Birke, Wondwossen ; Beyene, Abebe ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Assessment of the effluent quality of wet coffee processing wastewater and its influence on downstream water quality. In: Ecohydrology & Hydrobiology, Vol. 18, no. 2, p. 201-211 (2017). doi:10.1016/j.ecohyd.2017.10.007.
2018
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part I. In: Advances in Chemical Engineering, Vol. 52, p. 2-192 (2018).
2018
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part II. In: Advances in Chemical Engineering, Vol. 53, p. 2-245 (2018).
2018
Ruiz Salmon, Israel ; Cambier, Nicolas ; Luis Alconero, Patricia. CO2 Capture by Alkaline Solution for Carbonate Production: A Comparison between a Packed Column and a Membrane Contactor. In: Applied Sciences, Vol. 8, no.6, p. 996 (2018). doi:10.3390/app8060996.
2018
Ren, Xueping ; Chen, Xiaohui ; Xiong, Zhiping. Characterization and analysis of diffusion bonding process in a Cr25Ni7Mo4MnSi duplex stainless steel. In: Journal of Manufacturing Processes, Vol. 34, p. 603-613 (2018). doi:10.1016/j.jmapro.2018.07.005.
2018
Weng, Yaoyao ; Jia, Zhihong ; Ding, Lipeng ; Muraishi, Shinji ; Liu, Qing. Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition. In: Materials Science and Engineering: A, Vol. 732, p. 273-283 (2018). doi:10.1016/j.msea.2018.07.018.
2018
Raoelison, Rija Nirina ; Xie, Yingchun ; Sapanathan, Thaneshan ; Planche, Marie Pierre ; Kromer, Robin ; Costil, Sophie ; Langlade, Cécile. Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date. In: Additive Manufacturing, Vol. 19, p. 134-159 (2018). doi:10.1016/j.addma.2017.07.001.
2018
Amani, Yasin ; Dancette, Sylvain ; Delroisse, Pauline ; Simar, Aude ; Maire, Eric. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches. In: Acta Materialia, Vol. 159, p. 395-407 (2018). doi:10.1016/j.actamat.2018.08.030.
2018
Amelio, Antonio ; Figueroa Paredes, Danilo Alexander ; Degrève, Jan ; Luis Alconero, Patricia ; Van der Bruggen, Bart ; Espinosa, José. Conceptual model-based design and environmental evaluation of waste solvent technologies: Application to the separation of the mixture acetone-water. In: Separation Science and Technology, Vol. 53, no. 11, p. 1791-1810 (2018). doi:10.1080/01496395.2018.1442858.
2018
Tang, Xiaohui ; Reckinger, Nicolas ; Poncelet, Olivier ; Louette, Pierre ; Urea-Begara F. ; Idrissi, Hosni ; Turner S. ; Cabossart D. ; Colomer J.F. ; Raskin, Jean-Pierre. Damage evaluation in graphene underlying atomic deposition dielectrics. In: Belvac News - Société Belge de Vacuologie asbl, Vol. 63, no.3, p. 1-18 (2018). doi:10.1038/srep13523.
2018
Samaee, Vahid ; Gatti, Riccardo ; Devincre, Benoit ; Pardoen, Thomas ; Schryvers, Dominique ; Idrissi, Hosni. Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing.. In: Scientific reports, Vol. 8, no.1, p. 12012 (2018). doi:10.1038/s41598-018-30639-8.
2018
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel. In: Scripta Materialia, Vol. 157, p. 6-9 (2018). doi:10.1016/j.scriptamat.2018.07.030.
2018
Lumbeeck, Gunnar ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Favache, Audrey ; Delmelle, Renaud ; Samaee, Vahid ; Proost, Joris ; Pardoen, Thomas ; Schryvers, Dominique. Effect of hydriding induced defects on the small-scale plasticity mechanisms in nanocrystalline palladium thin films. In: Journal of Applied Physics, Vol. 124, no.22, p. 225105 (2018). doi:https://doi.org/10.1063/1.5055274. doi:10.1063/1.5055274.
2018
Poulain, Raphaël ; Klein, Andreas ; Proost, Joris. Electro‐catalytic properties of (100), (110) and (111) oriented NiO thin films towards the Oxygen evolution reaction. In: The Journal of Physical Chemistry Part C: Nanomaterials and Interfaces, Vol. 122, p. 22252-22263 (2018). doi:10.1021/acs.jpcc.8b05790.
2018
Delmelle, Renaud ; Terreni, Jasmin ; Remhof, Arndt ; Heel, Andre ; Proost, Joris ; Borschulte, Andreas. Evolution of Water Diffusion in a Sorption-Enhanced Methanation Catalyst. In: Catalysts, Vol. 8, no.9, p. 341 (2018). doi:10.3390/catal8090341 (registering DOI).
2018
Saadouki, Bouchra ; Sapanathan, Thaneshan ; Pelca, Philippe ; Elghorba, Mohamed ; Rachik, Mohamed. Fatigue damage in fieldshapers used during electromagnetic forming and welding processes at high frequency impulse current. In: International Journal of Fatigue, Vol. 109, p. 93-102 (2018). doi:10.1016/j.ijfatigue.2017.12.019.
2018
Ratan, Sanjiv ; De Wilde, Juray. Gearing up for future steam reforming. In: Nitrogen + Syngas, Vol. 353, p. 44-48 (2018).
2018
Poncelet, Olivier ; Rasson, Jonathan ; Tuyaerts, Romain ; Coulombier, Michaël ; Kotipalli, Ratan Raja Venkata ; Raskin, Jean-Pierre ; Francis, Laurent. Hemispherical cavities on silicon substrates: an overview of micro fabrication techniques. In: Materials Research Express, Vol. 5, no. 4, p. 045702 (2018). doi:10.1088/2053-1591/aab907.
2018
Simar, Aude ; Godet, Stéphane ; Watkins, Thomas R.. Highlights of the special issue on metal additive manufacturing. In: Materials Characterization, Vol. 143, p. 1-4 (2018). doi:10.1016/j.matchar.2018.06.013.
2018
Piret, Nicolas ; Santoro, Ronny ; Dogot, Loïck ; Barthélemy, Bastien ; Peyroux, Eugénie ; Proost, Joris. Influence of glass composition on the kinetics of glass etching and frosting in concentrated HF solutions. In: Journal of Non-Crystalline Solids, Vol. 499, p. 208-216 (2018). doi:10.1016/j.jnoncrysol.2018.07.030.
2018
Minette, Florent ; Lugo-Pimentel, Michael ; Modroukas, Dean ; Davis, Andrew W. ; Gill, Rajinder ; Castaldi, Marco J. ; De Wilde, Juray. Intrinsic kinetics of steam methane reforming on a thin, nanostructured and adherent Ni coating. In: Applied Catalysis B: Environmental, Vol. 238, p. 184-197 (2018). doi:10.1016/j.apcatb.2018.07.015.
2018
Ren, Xueping ; Li, Shuxia ; Xiong, Zhiping. Isostatic diffusion bonding and post-solution treatment between Cr22Ni5Mo3MnSi and Cr30Ni7Mo3MnSi duplex stainless steels. In: Journal of Manufacturing Processes, Vol. 34, p. 215-224 (2018). doi:10.1016/j.jmapro.2018.06.010.
2018
Sandu, Georgiana ; Coulombier, Michaël ; Kumar, Vishank ; Kassa, Hailu G. ; Avram, Ionel ; Ye, Ran ; Stopin, Antoine ; Bonifazi, Davide ; Gohy, Jean-François ; Leclère, Philippe ; Gonze, Xavier ; Pardoen, Thomas ; Vlad, Alexandru ; Melinte, Sorin. Kinked silicon nanowires-enabled interweaving electrode configuration for lithium-ion batteries. In: Scientific Reports, Vol. 8, p. 9794 (2018). doi:10.1038/s41598-018-28108-3.
2018
Khoddam, Shahin ; Tian, Liang ; Sapanathan, Thaneshan ; Hodgson, Peter D. ; Zarei-Hanzaki, Abbas. Latest Developments in Modeling and Characterization of Joining Metal Based Hybrid Materials. In: Advanced Engineering Materials, Vol. 20, no. 9, p. 1800048 (2018). doi:10.1002/adem.201800048.
2018
Simar, Aude ; Mertens, Anne ; Ryelandt, Sophie ; Delannay, Francis ; Brassart, Laurence. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. In: Materials Science and Engineering: A, Vol. 723, p. 324-333 (2018). doi:10.1016/j.msea.2018.03.043.
2018
Ruiz Salmon, Israel ; Luis Alconero, Patricia. Membrane crystallization via membrane distillation. In: Chemical Engineering and Processing: Process Intensification, Vol. 123, p. 258-271 (2018). doi:10.1016/j.cep.2017.11.017.
2018
Jimenez Mena, Norberto ; Jacques, Pascal ; Drezet, Jean-Marie ; Simar, Aude. On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 49, no. 7, p. 2692-2704 (2018). doi:10.1007/s11661-018-4618-z.
2018
van der Rest, Camille ; Schmitz, Alain ; Jacques, Pascal. On the characterisation of antisite defects and ordering in off-stoichiometric Fe 2 VAl-based Heusler compounds by X-ray anomalous diffraction. In: Acta Materialia, Vol. 142, p. 193-200 (2018). doi:10.1016/j.actamat.2017.09.024.
2018
Duisit, Jérôme ; Amiel, Hadrien ; Wüthrich, Tsering ; Taddeo, Adriano ; Dedriche, Adeline ; Destoop, Vincent ; Pardoen, Thomas ; Bouzin, Caroline ; Joris, Virginie ; Magee, Derek ; Vögelin, Esther ; Harriman, David ; Dessy, Chantal ; Orlando, Giuseppe ; Behets Wydemans, Catherine ; Rieben, Robert ; Gianello, Pierre ; Lengelé, Benoît. Perfusion-decellularization of human ear grafts enables ECM-based scaffolds for auricular vascularized composite tissue engineering.. In: Acta Biomaterialia, Vol. 73, p. 339-354 (2018). doi:10.1016/j.actbio.2018.04.009.
2018
Lopez-Covaleda, Edwin ; Ghodrat, Sepideh ; Kestens, Leo ; Sacre, Charles-Henry ; Pardoen, Thomas. Proposal of Characterization Procedure of Metal–Graphite Interface Strength in Compacted Graphite Iron. In: Materials, Vol. 11, no.7, p. 1159 (2018). doi:10.3390/ma11071159.
2018
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. In: Acta Materialia, Vol. 148, p. 456-466 (2018). doi:10.1016/j.actamat.2018.02.003.
2018
Guzzinati, Giulio ; Altantzis, Thomas ; Batuk, Maria ; De Backer, Annick ; Lumbeeck, Gunnar ; Samaee, Vahid ; Batuk, Dmitry ; Idrissi, Hosni ; Hadermann, Joke ; Van Aert, Sandra ; Schryvers, Dominique ; Verbeeck, Johan ; Bals, Sara. Recent Advances in Transmission Electron Microscopy for Materials Science at the EMAT Lab of the University of Antwerp. In: Materials, Vol. 11, no.8, p. 1304 (2018). doi:10.3390/ma11081304.
2018
Miotti Bettanini, Alvise ; Hannard, Florent ; Jacques, Pascal ; Pardoen, Thomas ; Guilleume, Badinier ; Mithieux, Jean Denis ; Delannay, Laurent. Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 731, p. 495 - 505 (2018). doi:10.1016/j.msea.2018.06.012.
2018
Sironval, Violaine ; Ryelandt, Laurence ; Chaurand, Perrine ; Ibouraadaten, Saloua ; Palmai-Pallag, Mihaly ; Yakoub, Yousof ; Ucakar, Bernard ; Rose, Jérôme ; Poleunis, Claude ; Vanbever, Rita ; Marbaix, Etienne ; Lison, Dominique ; Van Den Brûle, Sybille. Respiratory hazard of Li-ion battery components: elective toxicity of lithium cobalt oxide (LiCoO2) particles in a mouse bioassay. In: Archives of Toxicology, Vol. 92, no. 5, p. 1673-1684 (2018). doi:10.1007/s00204-018-2188-x.
2018
Salmón, I. Ruiz ; Simon, K. ; Clérin, C. ; Luis Alconero, Patricia. Salt Recovery from Wastewater Using Membrane Distillation–Crystallization. In: Crystal Growth & Design, Vol. 18, no. 12, p. 7275-7285 (2018). doi:10.1021/acs.cgd.8b00580.
2018
Li, Wenqi ; Francesco Galiano ; Julien Estager ; Jean-Christophe Monbaliu ; Debecker, Damien P. ; Alberto Figoli ; Luis Alconero, Patricia. Sorption and pervaporation study of methanol/dimethyl carbonate mixture with poly(etheretherketone) (PEEK-WC) membrane. In: Journal of Membrane Science, Vol. 567, p. 303-310 (2018). doi:10.1016/j.memsci.2018.09.040.
2018
Ratan, Sanjiv ; De Wilde, Juray. Structured catalyst for steam reforming. A catalyst system for steam methane reforming for improved heat transfer, pressure drop and catalyst effectiveness. In: ePTQ.COM, Vol. Q3, p. 111-113 (2018).
2018
Yin, Chao ; Terentyev, Dmitry ; Pardoen, Thomas ; Bakaeva, Anastasiia ; Petrov, Roumen ; Antusch, Steffen ; Rieth, Michael ; Vilémová, Monika ; Matějíček, Jiří ; Zhang, Tao. Tensile properties of baseline and advanced tungsten grades for fusion applications. In: International Journal of Refractory Metals and Hard Materials, Vol. 75, p. 153-162 (2018). doi:10.1016/j.ijrmhm.2018.04.003.
2018
Delannay, Francis ; Brassart, Laurence. Transient and asymptotic kinetics of mass transfer by coupled surface and grain boundary diffusion in sintering under strain rate control. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, Vol. 474, no.2217, p. 20180104 (2018). doi:10.1098/rspa.2018.0104.
2018
Lin, Fengxiang ; Marteleur, Matthieu ; Jacques, Pascal ; Delannay, Laurent. Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. In: International Journal of Plasticity, Vol. 105, p. 195-210 (2018). doi:10.1016/j.ijplas.2018.02.012.
2018
Li, Wenqi ; Luis Alconero, Patricia. Understanding coupling effects in pervaporation of multi-component mixtures. In: Separation and Purification Technology, Vol. 197, no. 1, p. 95-106 (2018). doi:10.1016/j.seppur.2017.12.041.
2018
Chevalier, Jérémy ; Brassart, Laurence ; Lani, Frédéric ; Bailly, Christian ; Pardoen, Thomas ; Morelle, Xavier. Unveiling the nanoscale heterogeneity controlled deformation of thermosets. In: Journal of the Mechanics and Physics of Solids, Vol. 121, no.1, p. 432-446 (2018). doi:10.1016/j.jmps.2018.08.014.
2018
Dadi, D. ; Beyene, A. ; Simoens, K. ; Soares, J. ; Demeke, M. M. ; Thevelein, J. M. ; Bernaerts, K. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Valorization of coffee byproducts for bioethanol production using lignocellulosic yeast fermentation and pervaporation. In: International Journal of Environmental Science and Technology, Vol. 15, p. 821-832 (2018). doi:10.1007/s13762-017-1440-x.
2017
De Wilde, Juray ; Lorant, Christophe ; Descamps, Pierre. 2D modeling and simulation of the flow dynamics, electric field and reactions in a low-temperature, atmospheric-pressure nitrogen plasma sharp-end plate-to-plane configuration and CVD reactor. In: Journal of Physics D: Applied Physics, Vol. 50, no.13, p. 135202 (2017). doi:10.1088/1361-6463/aa5c1d.
2017
Hammad, Mohamed ; Adjizian, Jean Joseph ; Sacré, Charles-Henri ; Huet, Benjamin ; Charlier, Jean-Christophe ; Raskin, Jean-Pierre ; Pardoen, Thomas. Adhesionless and near-ideal contact behavior of graphene on Cu thin film. In: Carbon, Vol. 122, p. 446-450 (2017). doi:10.1016/j.carbon.2017.06.037.
2017
Verma, Vikrant ; Li, Tingwen ; De Wilde, Juray. Coarse-grained discrete particle simulations of particle segregation in rotating fluidized beds in vortex chambers. In: Powder Technology, Vol. 318, p. 282-292 (2017). doi:10.1016/j.powtec.2017.05.037.
2017
Lapouge, Pierre ; Onimus, F. ; Coulombier, Michaël ; Raskin, Jean-Pierre ; Pardoen, Thomas. Creep behavior of submicron copper films under irradiation. In: Acta Materialia, Vol. 131, p. 77-87 (2017). doi:10.1016/j.actamat.2017.03.056.
2017
Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas ; Simar, Aude. Ductilization of aluminium alloy 6056 by friction stir processing. In: Acta Materialia, Vol. 130, p. 121-136 (2017). doi:10.1016/j.actamat.2017.01.047.
2017
David Lukumu Bampole ; Luis Alconero, Patricia ; Emmanuel Lukumu Mulamba. Effect of Substrates During the Adaptation of Indigenous Bacteria in Bioleaching of Sulphide Ores. In: American Scientific Research Journal for Engineering, Technology, and Sciences, Vol. 32, no.1, p. 200-214 (2017).
2017
Zhang, Z ; Zhao, S ; Rezakazemi, M ; Chen, F ; Luis Alconero, Patricia ; van der Bruggen, B. Effect of flow and module configuration on SO absorption by using membrane contactors. In: Global Nest Journal, Vol. 19, no. 4, p. 716-725 (2017).
2017
Dubinko, A. ; Terentyev, D. ; Bakaeva, A. ; Pardoen, Thomas ; Zibrov, M. ; Morgan, T.W.. Effect of high flux plasma exposure on the micro-structural and -mechanical properties of ITER specification tungsten. In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 393, p. 155-159 (2017). doi:10.1016/j.nimb.2016.10.041.
2017
Sacre, Charles-Henry ; Lani, F. ; Guaino, Ph. ; Libralesso, L. ; Favache, Audrey ; Pardoen, Thomas. Effect of polymer interlayer on scratch resistance of hard film: Experiments and finite element modeling. In: Wear, Vol. 378-379, p. 136-144 (2017). doi:10.1016/j.wear.2017.02.033.
2017
Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier ; Simar, Aude. Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. In: Scripta Materialia, Vol. 141, p. 32-35 (2017). doi:10.1016/j.scriptamat.2017.07.020.
2017
Delvaux, Adeline ; Van Overmeere, Quentin ; Poulain, Raphaël ; Proost, Joris. Enhanced Oxygen Evolution during Water Electrolysis at De-Alloyed Nickel Thin Film Electrodes. In: Journal of the Electrochemical Society, Vol. 164, no. 12, p. F1196-F1203 (2017). doi:10.1149/2.1451712jes.
2017
Weber, Justin M. ; Stehle, Richard C. ; Breault, Ronald W. ; De Wilde, Juray. Experimental study of the application of rotating fluidized beds to particle separation. In: Powder Technology, Vol. 316, p. 123-130 (2017). doi:10.1016/j.powtec.2016.12.076.
2017
Ghidelli, Matteo ; Idrissi, Hosni ; Gravier, Sébastien ; Blandin, Jean-Jacques ; Raskin, Jean-Pierre ; Schryvers, Dominique ; Pardoen, Thomas. Homogeneous flow and size dependent mechanical behavior in highly ductile Zr65Ni35 metallic glass films. In: Acta Materialia, Vol. 131, p. 246-259 (2017). doi:10.1016/j.actamat.2017.03.072.
2017
Alkorta, Jon ; Marteleur, Matthieu ; Jacques, Pascal. Improved simulation based HR-EBSD procedure using image gradient based DIC techniques. In: Ultramicroscopy, Vol. 182, p. 17-27 (2017). doi:10.1016/j.ultramic.2017.06.015.
2017
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Influence of Y2O3 nanoparticles on the twinning of single crystalline magnesium. In: Scripta Materialia, Vol. 138, p. 79-82 (2017). doi:10.1016/j.scriptamat.2017.05.016.
2017
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Badinier, Guillaume ; Mithieux, Jean-Denis. Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel. In: AIP Conference Proceedings, Vol. 1896, p. 020010 (2017). doi:10.1063/1.5007967.
2017
Rosales Trujillo, Waldo ; De Wilde, Juray. Influence of solids outlets and the gas inlet design on the generation of a gas-solids rotating fluidized bed in a vortex chamber for different types of particles. In: Chemical Engineering Science, Vol. 173, p. 74-90 (2017). doi:10.1016/j.ces.2017.07.031.
2017
Tuyaerts, Romain ; Poncelet, Olivier ; Raskin, Jean-Pierre ; Proost, Joris. Internal stress and opto-electronic properties of ZnO thin films deposited by reactive sputtering in various oxygen partial pressures. In: Journal of Applied Physics, Vol. 122, no.15, p. 155306 (2017). doi:10.1063/1.4996453.
2017
Lin, Fengxiang ; Marteleur, Matthieu ; Alkorta, Jon ; Jacques, Pascal ; Delannay, Laurent. Local stress field induced by twinning in a metastable beta-titanium alloy. In: IOP Conference Series: Materials Science and Engineering, Vol. 219, p. 012031 (2017). doi:10.1088/1757-899X/219/1/012031.
2017
Ruiz Salmon, Israel ; Janssens, Raphaël ; Luis Alconero, Patricia. Mass and heat transfer study in osmotic membrane distillationcrystallization for CO2 valorization as sodium carbonate. In: Separation and Purification Technology, Vol. 176, p. 173-183 (2017). doi:10.1016/j.seppur.2016.12.010.
2017
van der Rest, Astrid ; Idrissi, Hosni ; Henry, Frédéric ; Favache, Audrey ; Schryvers, Dominique ; Proost, Joris ; Raskin, Jean-Pierre ; Van Overmeere, Quentin ; Pardoen, Thomas. Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films. In: Acta Materialia, Vol. 125, p. 27-37 (2017). doi:10.1016/j.actamat.2016.11.037.
2017
Morelle, Xavier ; Chevalier, Jérémy ; Bailly, Christian ; Pardoen, Thomas. Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin. In: Mechanics of Time Dependent Materials, Vol. 21, no. 3, p. 419-454 (2017). doi:10.1007/s11043-016-9336-6.
2017
Wucher, B. ; Hallström, S. ; Dumas, D. ; Pardoen, Thomas ; Bailly, Christian ; Martiny, P. ; Lani, F.. Nonconformal mesh-based finite element strategy for 3D textile composites. In: Journal of Composite Materials, Vol. 51, no.16, p. 2315-2330 (2017). doi:10.1177/0021998316669875.
2017
Schryvers, D. ; Salje, E.K.H. ; Nishida, M. ; De Backer, A. ; Idrissi, Hosni ; Van Aert, S.. Quantification by aberration corrected (S)TEM of boundaries formed by symmetry breaking phase transformations. In: Ultramicroscopy, Vol. 176, p. 194-199 (2017). doi:10.1016/j.ultramic.2016.12.022.
2017
Samaeeaghmiyoni, Vahid ; Idrissi, Hosni ; Groten, Jonas ; Schwaiger, Ruth ; Schryvers, Dominique. Quantitative in-situ TEM nanotensile testing of single crystal Ni facilitated by a new sample preparation approach. In: Micron, Vol. 94, p. 66-73 (2017). doi:10.1016/j.micron.2016.12.005.
2017
Tran, H-S ; Tummala, Hareesh ; Duchêne,L ; Pardoen, Thomas ; Fivel, Marc ; Habraken, A.-M.. Quasi-Continuum analysis of Dislocation-Coherent Twin Boundary interactions to provide local rules to Discrete Dislocation Dynamics. In: AIP Conference Proceedings, Vol. 1896, no. 1 (2017) (2017).
2017
Long, Nguyen ; Lee, Jintae ; Koo, Kee-Kahb ; Luis Alconero, Patricia ; Lee, Moonyong. Recent Progress and Novel Applications in Enzymatic Conversion of Carbon Dioxide. In: Energies, Vol. 10, no. 12, p. 473 (2017). doi:10.3390/en10040473.
2017
Zhang, Rui-Xin ; Braeken, Leen ; Liu, Tian-Yin ; Luis Alconero, Patricia ; Wang, Xiao-Lin ; Van der Bruggen, Bart. Remarkable Anti-Fouling Performance of TiO2-Modified TFC Membranes with Mussel-Inspired Polydopamine Binding. In: Applied Sciences, Vol. 7, no.1, p. 81 (2017). doi:10.3390/app7010081.
2017
Wucher, B. ; Martiny, Ph. ; Lani, F. ; Pardoen, Thomas ; Bailly, Christian ; Dumas, D.. Simulation-driven mold compensation strategy for composites: Experimental validation on a doubly-curved part. In: Composites Part A: Applied Science and Manufacturing, Vol. 102, p. 96-107 (2017). doi:10.1016/j.compositesa.2017.07.029.
2017
Janssens, Raphaël ; Mandal, Mrinal Kanti ; Dubey, Kashyap Kumar ; Luis Alconero, Patricia. Slurry photocatalytic membrane reactor technology for removal of pharmaceutical compounds from wastewater: Towards cytostatic drug elimination. In: Science of the Total Environment, Vol. 599-600, p. 612-626 (2017). doi:10.1016/j.scitotenv.2017.03.253.
2017
Simar, Aude ; Avettand-Fènoël, Marie-Noëlle. State of the art about dissimilar metal friction stir welding. In: Science and Technology of Welding and Joining (Print), Vol. 22, no. 5, p. 389-403 (2017). doi:10.1080/13621718.2016.1251712.
2017
Sun, F. ; Zhang, J. Y. ; Vermaut, P. ; Choudhuri, D. ; Alam, T. ; Mantri, S. A. ; Svec, P. ; Gloriant, T. ; Jacques, Pascal ; Banerjee, R. ; Prima, F.. Strengthening strategy for a ductile metastableβ-titanium alloy using low-temperature aging. In: Materials Research Letters, Vol. 5, no. 8, p. 547-553 (2017). doi:10.1080/21663831.2017.1350211.
2017
Hatami, M.K. ; Pardoen, Thomas ; Lacroix, G. ; Berke, P. ; Jacques, Pascal ; Massart, T.J.. Towards ultra-high ductility TRIP-assisted multiphase steels controlled by strain gradient plasticity effects. In: Journal of the Mechanics and Physics of Solids, Vol. 98, p. 201-221 (2017). doi:10.1016/j.jmps.2016.09.006.
2016
Brozek , C. ; Sun, F. ; Vermaut, P. ; Millet, C. ; Lenain, Astrid ; Embury, D. ; Jacques, Pascal ; Prima, F.. A Beta-titanium alloy with extra high strain-hardening rate: Design and mechanical properties. In: Scripta Materialia, Vol. 114, p. 60-64 (2016). doi:10.1016/j.scriptamat.2015.11.020.
2016
Lin, J. ; Tang, C.Y. ; Huang, C. ; Tang, Y.P. ; Ye, W. ; Li, J. ; Shen, J. ; Van den Broeck, R. ; Van Impe, J. ; Volodin, A. ; Van Haesendonck, C. ; Sotto, A. ; Luis Alconero, Patricia ; Van der Bruggen, B.. A comprehensive physico-chemical characterization of superhydrophilic loose nanofiltration membranes. In: Journal of Membrane Science, Vol. 501, p. 1-14 (2016). doi:10.1016/j.memsci.2015.11.044.
2016
Favache, Audrey ; Ryelandt, Sophie ; Melchior, Maxime ; Zeb, Gul ; Carbonnelle, Pierre ; Raskin, Jean-Pierre ; Pardoen, Thomas. A generic “micro-Stoney” method for the measurement of internal stress and elastic modulus of ultrathin films. In: Review of Scientific Instruments, Vol. 87, no.1, p. 015002 (2016). doi:10.1063/1.4939912.
2016
Nguyen, V.-D. ; Lani, Frédéric ; Pardoen, Thomas ; Morelle, X.P. ; Noels, L.. A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers. In: International Journal of Solids and Structures, Vol. 96, p. 192-216 (2016). doi:10.1016/j.ijsolstr.2016.06.008.
2016
Lapouge, Pierre ; Onimus, Fabien ; Vayrette, Renaud ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Bréchet, Yves. A novel on chip test method to characterize the creep behavior of metallic layers under heavy ion irradiation. In: Journal of Nuclear Materials, Vol. 476, p. 20-29 (2016). doi:10.1016/j.jnucmat.2016.04.014.
2016
Avettand-Fènoël, Marie-Noëlle ; Simar, Aude. A review about Friction Stir Welding of metal matrix composites. In: Materials Characterization, Vol. 120, p. 1-17 (2016). doi:10.1016/j.matchar.2016.07.010.
2016
Pardoen, Thomas ; Colla, Marie-Stéphane ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Wang, Binjie ; Schryvers, Dominique ; Bhaskar, Umesh Kumar ; Raskin, Jean-Pierre. A versatile lab-on-chip test platform to characterize elementary deformation mechanisms and electromechanical couplings in nanoscopic objects. In: Comptes rendus. Physique, Vol. 17, no.3-4, p. 485-495 (2016). doi:10.1016/j.crhy.2015.11.005.
2016
Delannay, Francis ; Missiaen, Jean-Michel. Assessment of solid state and liquid phase sintering models by comparison of isothermal densification kinetics in W and W-Cu systems. In: Acta Materialia, Vol. 106, p. 22-31 (2016). doi:10.1016/j.actamat.2015.12.041.
2016
Delannay, Francis. Capillary equilibrium and sintering kinetics in dispersed media and catalysts. In: Surface Science, Vol. 648, p. 262-270 (2016). doi:10.1016/j.susc.2015.11.004.
2016
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Le Bourlot, C. ; Mokso, Rajmund ; Simar, Aude. Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys. In: Acta Materialia, Vol. 103, p. 558-572 (2016). doi:10.1016/j.actamat.2015.10.008.
2016
Amelio, A. ; Van De Voorde, T. ; Creemers, C. ; Degrève, J. ; Darvishmanesh, S. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Comparison between exergy and energy analysis for biodiesel production. In: Energy, Vol. 98, p. 135-145 (2016). doi:10.1016/j.energy.2016.01.018.
2016
Meyer, R. ; Figueroa Paredes, D.A. ; Fuentes, M. ; Amelio, A. ; Morero, B. ; Luis Alconero, Patricia ; Van Der Bruggen, B. ; Espinosa, J.. Conceptual model-based optimization and environmental evaluation of waste solvent technologies: Distillation/incineration versus distillation/pervaporation. In: Separation and Purification Technology, Vol. 158, p. 238-249 (2016). doi:10.1016/j.seppur.2015.12.024.
2016
Turner, S. ; Idrissi, Hosni ; Sartori, A.F. ; Korneychuck, S. ; Lu, Y.-G. ; Verbeeck, J. ; Schreck, M. ; Van Tendeloo, G.. Direct imaging of boron segregation at dislocations in B:diamond heteroepitaxial films. In: Nanoscale, Vol. 8, p. 2212-2218 (2016). doi:10.1039/c5nr07535a.
2016
Lemoine, Guerric ; Delannay, Laurent ; Idrissi, Hosni ; Colla, Marie-Stéphane ; Pardoen, Thomas. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. In: Acta Materialia, Vol. 111, p. 10-21 (2016). doi:10.1016/j.actamat.2016.03.038.
2016
Amin-Ahmadi, Behnam ; Connétable, Damine ; Fivel, Marc ; Tanguy, Döme ; Delmelle, Renaud ; Turner, Stuart ; Malet, Loic ; Godet, Stéphane ; Pardoen, Thomas ; Proost, Joris ; Schryvers, Dominique ; Idrissi, Hosni. Dislocation/hydrogen interaction mechanisms in hydrided nanocrystalline palladium films. In: Acta Materialia, Vol. 111, p. 253-261 (April 2016). doi:10.1016/j.actamat.2016.03.054.
2016
Proost, Joris ; Henry, Frédéric ; Tuyaerts, Romain ; Michotte, Sébastien. Effect of internal stress on the electro-optical behaviour of Al-doped ZnO transparent conductive thin films. In: Journal of Applied Physics, Vol. 120, p. 075308 (2016). doi:10.1063/1.4960580.
2016
Jullok, N. ; Van Hooghten, R. ; Luis Alconero, Patricia ; Volodin, A. ; Van Haesendonck, C. ; Vermant, J. ; Van der Bruggen, B.. Effect of silica nanoparticles in mixed matrix membranes for pervaporation dehydration of acetic acid aqueous solution: Plant-inspired dewatering systems. In: Journal of Cleaner Production, Vol. 112, p. 4879-4889 (2016). doi:10.1016/j.jclepro.2015.09.019.
2016
Ye, W. ; Lin, J. ; Tækker Madsen, H. ; Gydesen Søgaard, E. ; Hélix-Nielsen, C. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Enhanced performance of a biomimetic membrane for Na2CO3 crystallization in the scenario of CO2 capture. In: Journal of Membrane Science, Vol. 498, p. 75-85 (2016). doi:10.1016/j.memsci.2015.09.010.
2016
Pati, Jnyana Ranjan ; Dutta, Subhajit ; Eliaers, Philippe ; Mahanta, Pinakeswar ; Chatterjee, Pradip Kumar ; De Wilde, Juray. Experimental study of paddy drying in a vortex chamber. In: Drying Technology : an international journal, Vol. 34, no.9, p. 1073-1084 (2016). doi:10.1080/07373937.2015.1093498.
2016
Pineau, A. ; Benzerga, A.A. ; Pardoen, Thomas. Failure of metals I: Brittle and ductile fracture. In: Acta Materialia, Vol. 107, p. 424-483 (2016). doi:10.1016/j.actamat.2015.12.034.
2016
Pineau, André ; Amine Benzerga, A. ; Pardoen, Thomas. Failure of metals III: Fracture and fatigue of nanostructured metallic materials. In: Acta Materialia, Vol. 107, p. 508-544 (2016). doi:10.1016/j.actamat.2015.07.049.
2016
Vayrette, Renaud ; Galceran, M. ; Coulombier, Michaël ; Godet, S. ; Raskin, Jean-Pierre ; Pardoen, Thomas. Fracture mechanisms in freestanding polycrystalline silicon films with nanoscale thickness. In: Engineering Fracture Mechanics, Vol. 68, no.Part A, p. 190-203 (December 2016). doi:10.1016/j.engfracmech.2016.10.003.
2016
Mas, Fanny ; Martin, Guilhem ; Lhuissier, Pierre ; Bréchet, Yves ; Tassin, Catherine ; Roch, François ; Simar, Aude. Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 667, p. 156-170 (2016). doi:10.1016/j.msea.2016.04.082.
2016
Lai, Qingquan ; Brassart, Laurence ; Bouaziz, Olivier ; Gouné, Mohamed ; Verdier, Marc ; Parry, Guillaume ; Perlade, Astrid ; Bréchet, Yves ; Pardoen, Thomas. Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: Experiments and micromechanical modeling. In: International Journal of Plasticity, Vol. 80, p. 187-203 (2016). doi:10.1016/j.ijplas.2015.09.006.
2016
Van Duc Long, Nguyen ; Quang Minh, Le ; Ahmad, Faizan ; Luis Alconero, Patricia ; Lee, Moonyong. Intensified Distillation-Based Separation Processes:Recent Developments and Perspectives. In: Chemical Engineering and Technology, Vol. 39, no.12, p. 2183-2195 (2016). doi:10.1002/ceat.201500635.
2016
Voleppe, Quentin ; Pardoen, Thomas ; Bailly, Christian. Interdiffusion and phase separation upon curing in thermoset-thermoplastic interphases unravelled by the characterization of partially cured systems. In: Polymer, Vol. 106, p. 120-127 (2016). doi:10.1016/j.polymer.2016.09.066.
2016
Idrissi, Hosni ; Bollinger, Caroline ; Boioli, Francesca ; Schryvers, Dominique ; Cordier, Patrick. Low-temterature plasticity of olivine revisited with in situ TEM nanomechanical testing. In: Science Advances, Vol. 2, p. e1501671 (2016). doi:10.1126/sciadv.1501671.
2016
Lai, Qingquan ; Gouné, Mohamed ; Perlade, Astrid ; Pardoen, Thomas ; Jacques, Pascal ; Bouaziz, Olivier ; Bréchet, Yves. Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel. In: Metallurgical and Materials Transactions A, Vol. 47, no.7, p. 3375-3386 (2016). doi:10.1007/s11661-016-3547-y.
2016
Heidari, Hamed ; Rivero, Guadalupe ; Idrissi, Hosni ; Ramachandran, Dhanya ; Cakir, Seda ; Egoavil, Ricardo ; Kurttepeli, Mert ; Crabbé, Amandine C. ; Hauffman, Tom ; Terryn, Herman ; Du Prez, Filip ; Schryvers, Dominique. Melamine–Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy. In: Microscopy and Microanalysis, Vol. 22, no.06, p. 1222-1232 (2016). doi:10.1017/S1431927616012484.
2016
Chevalier, Jérémy ; Morelle, Xavier ; Bailly, Christian ; Camanho, P.P. ; Pardoen, Thomas ; Lani, Frédéric. Micro-mechanics based pressure dependent failure model for highly cross-linked epoxy resins. In: Engineering Fracture Mechanics, Vol. 158, p. 1-12 (2016). doi:10.1016/j.engfracmech.2016.02.039.
2016
Missiaen, Jean-Michel ; Raharijaona, Jean-Joël ; Delannay, Francis. Modeling the Capillary Pressure for the Migration of the Liquid Phase in Granular Solid–Liquid–Vapor Systems: Application to the Control of the Composition Profile in W-Cu FGM Materials. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 47, no.11, p. 5569-5579 (2016). doi:10.1007/s11661-016-3702-5.
2016
Van Velthem, Pascal ; Ballout, Wael ; Horion, Jérémy ; Janssens , Y.-A. ; Destoop, Vincent ; Pardoen, Thomas ; Bailly, Christian. Morphology and fracture properties of toughened highly crosslinked epoxy composites: A comparative study between high and low Tg tougheners. In: Composites Part B: Engineering, Vol. 101, p. 14-20 (2016). doi:10.1016/j.compositesb.2016.06.076.
2016
Kalbfleisch, Anne-Sophie ; Matthews, Guillaume ; Jacques, Pascal. On the influence of the cooling rate on the martensitic transformation of Ni–Mn–Sn Heusler alloys. In: Scripta Materialia, Vol. 114, p. 121-124 (2016). doi:10.1016/j.scriptamat.2015.12.005.
2016
Genduso, G. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Overcoming any configuration limitation: An alternative operating mode for pervaporation and vapour permeation. In: Journal of Chemical Technology and Biotechnology, Vol. 91, no. 4, p. 948-957 (2016). doi:10.1002/jctb.4661.
2016
Bollen, Pierre ; Quiévy, Nicolas ; Detrembleur, Christophe ; Thomassin, Jean-Michel ; Monnereau, Laure ; Bailly, Christian ; Huynen, Isabelle ; Pardoen, Thomas. Processing of a new class of multifunctional hybrid for electromagnetic absorption based on a foam filled honeycomb. In: Materials & Design, Vol. 89, no. 5 January, p. 323-334 (2016). doi:10.1016/j.matdes.2015.09.129.
2016
Amelio, A. ; Loise, L. ; Azhandeh, R. ; Darvishmanesh, S. ; Calabró, V. ; Degrève, J. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Purification of biodiesel using a membrane contactor: Liquid-liquid extraction. In: Fuel Processing Technology, Vol. 142, p. 352-360 (2016). doi:10.1016/j.fuproc.2015.10.037.
2016
De Wilde, Juray ; Richards, George ; Benyahia, Sofiane. Qualitative numerical study of simultaneous high-G-intensified gas–solids contact, separation and segregation in a bi-disperse rotating fluidized bed in a vortex chamber. In: Advanced Powder Technology, Vol. 27, no.4, p. 1453-1463 (2016). doi:10.1015/j.apt2016.05.005.
2016
Ballout, Wael ; Coulon, B. ; Janssens, Y.-A. ; Van Velthem, Pascal ; Sclavons, Michel ; Magnin, Delphine ; Pardoen, Thomas ; Bailly, Christian. Quantitative characterization of interdiffusion at the resin-resin and resin-prepreg interphases of epoxy systems processed by model SQ-RTM. In: Polymer Engineering and Science, Vol. 56, no.9, p. 1061-1069 (2016). doi:10.1002/pen.24338.
2016
Li, Kai ; Idrissi, Hosni ; Sha, Gang ; Song, Min ; Lu, Jiangbo ; Shi, Hui ; Wang, Wanlin ; Ringer, Simon P. ; Du, Yong ; Schryvers, Dominique. Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys. In: Materials Characterization, Vol. 118, p. 352-362 (2016). doi:10.1016/j.matchar.2016.06.007.
2016
Li, Wenqi ; Van der Bruggen, B. ; Luis Alconero, Patricia. Recovery of Na2CO3 and Na2SO4 from mixed solutions by membrane crystallization. In: Chemical Engineering Research & Design, Vol. 106, p. 315-326 (2016). doi:10.1016/j.cherd.2015.12.022.
2016
Picasso, C. V. ; Safin, Damir ; Dovgaliuk, Iurii ; Devred, François ; Debecker, Damien P. ; Li, H.-W. ; Proost, Joris ; Filinchuk, Yaroslav. Reduction of CO2 with KBH4 in solvent-free conditions. In: International Journal of Hydrogen Energy, (2016). doi:10.1016/j.ijhydene.2016.04.052 (Accepté/Sous presse).
2016
Genduso, G. ; Amelio, A. ; Colombini, E. ; Luis Alconero, Patricia ; Degrève, J. ; Van der Bruggen, B.. Retrofitting of extractive distillation columns with high flux, low separation factor membranes: A way to reduce the energy demand?. In: Chemical Engineering Research & Design, Vol. 109, p. 127-140 (2016). doi:10.1016/j.cherd.2016.01.013.
2016
Vayrette, Renaud ; Galceran, M. ; Coulombier, Michaël ; Godet, S. ; Raskin, Jean-Pierre ; Pardoen, Thomas. Size dependent fracture strength and cracking mechanisms in freestanding polycrystalline silicon films with nanoscale thickness. In: Engineering Fracture Mechanics, Vol. 168, p. 190-203 (2016). doi:10.1016/j.engfracmech.2016.10.003.
2016
Terentyev, D. ; Bakaeva, A. ; Pardoen, Thomas ; Favache, Audrey ; Zhurkin, E.E.. Surface hardening induced by high flux plasma in tungsten revealed by nano-indentation. In: Journal of Nuclear Materials, Vol. 476, p. 1-4 (2016). doi:10.1016/j.jnucmat.2016.04.007.
2016
Bahrami, Amir ; Cordenier, François ; Van Velthem, Pascal ; Ballout, Wael ; Pardoen, Thomas ; Nysten, Bernard ; Bailly, Christian. Synergistic local toughening of high performance epoxy-matrix composites using blended block copolymer-thermoplastic thin films. In: Composites Part A: Applied Science and Manufacturing, Vol. 91, p. 398-405 (2016). doi:10.1016/j.compositesa.2016.08.038.
2016
Lin, J. ; Ye, W. ; Baltaru, M.-C. ; Tang, Y.P. ; Bernstein, N.J. ; Gao, P. ; Balta, S. ; Vlad, M. ; Volodin, A. ; Sotto, A. ; Luis Alconero, Patricia ; Zydney, A.L. ; Van der Bruggen, B.. Tight ultrafiltration membranes for enhanced separation of dyes and Na
2016
Luis Alconero, Patricia. Use of monoethanolamine (MEA) for CO2 capture in a global scenario: Consequences and alternatives. In: Desalination, Vol. 380, p. 93-99 (2016). doi:10.1016/j.desal.2015.08.004.
2016
Eliaers, Philippe ; De Wilde, Juray. Vortex chambers: a novel technology for drying, coating and producing particles in the food and feed industry. In: Food Science & Law, Vol. 2016, no. 4, p. 142-144 (2016).
2015
F. Sun ; J.Y. Zhang ; Marteleur, Matthieu ; C. Brozek ; E.F. Rauch ; M. Véron ; P. Vermaut ; Jacques, Pascal ; F. Prima. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility. In: Scripta Materialia, Vol. 94, no. 1, p. 17-20 (2015). doi:10.1016/j.scriptamat.2014.09.005.
2015
Navarro, Etienne ; Bréchet, Yves ; Barthelemy, A. ; Radu, I. ; Pardoen, Thomas ; Raskin, Jean-Pierre. Adhesion and separation models for direct hydrophilic bonding. In: Journal of Applied Physics, Vol. 117, p. 085305-1 - 085305-6 (2015). doi:10.1063/1.4913481.
2015
Ryelandt, Sophie ; Mertens, Anne ; Delannay, Francis. Al/stainless-invar composites with tailored anisotropy for thermal management in light weight electronic packaging. In: Materials & Design, Vol. 85, p. 318-323 (2015). doi:10.1016/j.matdes.2015.06.178.
2015
Tuninetti, V. ; Gilles, G. ; Milis, O. ; Pardoen, Thomas ; Habraken, Anne-Marie. Anisotropy and tension–compression asymmetry modeling of the room temperature plastic response of Ti–6Al–4V. In: International Journal of Plasticity, Vol. 67, p. 53-68 (2015). doi:10.1016/j.ijplas.2014.10.003.
2015
Godet, S. ; Jacques, Pascal. Beneficial influence of an intercritically rolled recovered ferritic matrix on the mechanical properties of TRIP-assisted multiphase steels. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 645, p. 20-27 (2015). doi:10.1016/j.msea.2015.07.082.
2015
Hauchhum, L. ; Mahanta, P. ; De Wilde, Juray. Capture of CO2 from Flue Gas onto Coconut Fibre-Based Activated Carbon and Zeolites in a Fixed Bed. In: Transport in Porous Media, Vol. 110, p. 503-519 (2015). doi:10.1007/s11242-015-0569-7.
2015
Bahrami, Amir ; Morelle, Xavier ; Hông Minh, Lê Duy ; Pardoen, Thomas ; Bailly, Christian ; Nysten, Bernard. Curing dependent spatial heterogeneity of mechanical response in epoxy resins revealed by atomic force microscopy. In: Polymer, Vol. 68, p. 1-10 (2015). doi:10.1016/j.polymer.2015.04.084.
2015
Lai, Q. ; Bouaziz, O. ; Gouné, M. ; Brassart, Laurence ; Verdier, M. ; Parry, G. ; Perlade, A. ; Bréchet, Y. ; Pardoen, Thomas. Damage and fracture of dual-phase steels: Influence of martensite volume fraction. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 646, p. 322-331 (2015). doi:10.1016/j.msea.2015.08.073.
2015
Colla, Marie-Stéphane ; Amin-Ahmadi, B. ; Idrissi, Hosni ; Malet, L. ; Godet, S. ; Raskin, Jean-Pierre ; Schryvers, D. ; Pardoen, Thomas. Dislocation-mediated relaxation in nanograined columnar palladium films revealed by on-chip time-resolved HRTEM testing. In: Nature Communications, Vol. 6, p. 5922 (2015). doi:10.1038/ncomms6922.
2015
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Bordo, Kirill ; Simar, Aude ; Ambat, Rajan. Effect of High Frequency Pulsing on the Interfacial Structure of Anodized Aluminium-TiO2. In: Journal of the Electrochemical Society, Vol. 162, no. 7, p. C303-C310 (March 2015). doi:10.1149/2.0311507jes.
2015
Delmelle, Renaud ; Amin-Ahmadi, Behnam ; Sinnaeve, Marc ; Idrissi, Hosni ; Pardoen, Thomas ; Schryvers, Dominique ; Proost, Joris. Effect of structural defects on the hydriding kinetics of nanocrystalline Pd thin films. In: International Journal of Hydrogen Energy, Vol. 40, no.23, p. 7335-7347 (2015). doi:10.1016/j.ijhydene.2015.04.017.
2015
Ye, W. ; Huang, J. ; Lin, J. ; Zhang, X. ; Shen, J. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Environmental evaluation of bipolar membrane electrodialysis for NaOH production from wastewater: Conditioning NaOH as a CO2 absorbent. In: Separation and Purification Technology, Vol. 144, p. 206-214 (2015). doi:10.1016/j.seppur.2015.02.031.
2015
Ghidelli, Matteo ; Gravier, S. ; Blandin, J.-J. ; Djemia, P. ; Mompiou, F. ; Abadias, G. ; Raskin, Jean-Pierre ; Pardoen, Thomas. Extrinsic mechanical size effects in thin ZrNi metallic glass films. In: Acta Materialia, Vol. 90, p. 232-241 (2015). doi:10.1016/j.actamat.2015.02.038.
2015
Proost, Joris ; Deschuyteneer, Geneviève ; Santoro, Ronny ; Van Overmeere, Quentin ; Soumillion, Patrice ; Flandre, Denis. Filamentous Phages Displaying Multivalent Peptide Motives With Specific Affinity To Anodic Alumina Surfaces. In: Journal of Biosensors & Bioelectronics, Vol. 6, no. 1, p. 1000162 (2015). doi:10.4172/2155-6210.1000162.
2015
Van Der Bruggen, B. ; Luis Alconero, Patricia. Forward osmosis: Understanding the hype. In: Reviews in Chemical Engineering, Vol. 31, no.1, p. 1-12 (2015). doi:10.1515/revce-2014-0033.
2015
Lin, J. ; Ye, W. ; Zeng, H. ; Yang, H. ; Shen, J. ; Darvishmanesh, S. ; Luis Alconero, Patricia ; Sotto, A. ; Van der Bruggen, B.. Fractionation of direct dyes and salts in aqueous solution using loose nanofiltration membranes. In: Journal of Membrane Science, Vol. 477, p. 183-193 (2015). doi:10.1016/j.memsci.2014.12.008.
2015
Favache, Audrey ; Sacre, Charles-Henry ; Coulombier, Michaël ; Libralesso, Laure ; Guaino, Philippe ; Raskin, Jean-Pierre ; Bailly, Christian ; Nysten, Bernard ; Pardoen, Thomas. Fracture mechanics based analysis of the scratch resistance of thin brittle coatings on a soft interlayer. In: Wear, Vol. 330-331, p. 461-468 (2015). doi:10.1016/j.wear.2015.01.081.
2015
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Simar, Aude ; Shabadi, Rajashekhara ; Ambat, Rajan. Friction Stir Processed Al-TiO2 Surface Composites: Anodizing Behaviour and Optical Appearance. In: Applied Surface Science, Vol. 324, p. 554-562 (2015). doi:10.1016/j.apsusc.2014.10.151.
2015
Monnereau, Laure ; Urbanczyk, Laetitia ; Thomassin, Jean-Michel ; Pardoen, Thomas ; Bailly, Christian ; Huynen, Isabelle ; Jérôme, Christine ; Detrembleur, Christophe. Gradient Foaming of Polycarbonate/carbon nanotube based Nanocomposites with Supercritical Carbon Dioxide and their EMI Shielding Performances. In: Polymer, Vol. 59, p. 117-123 (2015). doi:10.1016/j.polymer.2014.11.063.
2015
Gudla, Visweswara Chakravarthy ; Bordo, Kirill ; Jensen, Flemming ; Canulescu, Stela ; Yuksel, Serkan ; Simar, Aude ; Ambat, Rajan. High frequency anodising of aluminium–TiO2 surface composites: Anodising behaviour and optical appearance. In: Surface and Coatings Technology, Vol. 277, p. 67-73 (2015). doi:10.1016/j.surfcoat.2015.07.035.
2015
Delannay, Francis. Influence of Dihedral Angle and Grain Coordination on Densification Rate During Intermediate and Final Sintering Stages. In: Journal of the American Ceramic Society, Vol. 98, no.11, p. 3469-3475 (2015). doi:10.1111/jace.13577.
2015
Mertens, Anne ; Simar, Aude ; Adrien, Jérôme ; Maire, Eric ; Montrieux, Henri-Michel ; Delannay, Francis ; Lecomte-Beckers, Jacqueline. Influence of Fibre Distribution and Grain Size on the Mechanical Behaviour of Friction Stir Processed Mg-C Composites. In: Materials Characterization, Vol. 107, p. 125-133 (2015). doi:10.1016/j.matchar.2015.07.010.
2015
Van Velthem, Pascal ; Ballout, Wael ; Daoust, Daniel ; Sclavons, Michel ; Cordenier, François ; Henry, Edwin ; Dumont, David ; Destoop, Vincent ; Pardoen, Thomas ; Bailly, Christian. Influence of thermoplastic diffusion on morphology gradient and on delamination toughness of RTM-manufactured composites. In: Composites Part A: Applied Science and Manufacturing, Vol. 72, p. 175-183. doi:10.1016/j.compositesa.2015.02.012.
2015
van Oeffelen, Liesbeth ; Van Roy, Willem ; Idrissi, Hosni ; Charlier, Daniel ; Lagae, Liesbet ; Borghs, Gustaaf. Ion Current Rectification, Limiting and Overlimiting Conductances in Nanopores. In: PLoS One, Vol. 10, p. e0124171 (2015). doi:10.1371/journal.pone.0124171.
2015
Ben Bettaieb, Mohamed ; Van Hoof, Thibaut ; Minnebo, Hans ; Pardoen, Thomas ; Dufour, Philippe ; Jacques, Pascal ; Habraken, Anne-Marie. Micromechanics-Based Damage Analysis of Fracture in Ti5553 Alloy with Application to Bolted Sectors. In: Journal of Materials Engineering and Performance, Vol. 24, no. 3, p. 1262-1278 (March 2015). doi:10.1007/s11665-015-1383-7.
2015
Lai, Q. ; Bouaziz, O. ; Gouné, M. ; Perlade, A. ; Bréchet, Y. ; Pardoen, Thomas. Microstructure refinement of dual-phase steels with 3.5wt% Mn: Influence on plastic and fracture behavior. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 638, p. 78-89 (2015). doi:10.1016/j.msea.2015.04.044.
2015
Eliaers, Philippe ; Ranjan Pati, Jnyana ; Dutta, Subhajit ; De Wilde, Juray. Modeling and simulation of biomass drying in vortex chambers. In: Chemical Engineering Science, Vol. 123, p. 648-664 (2015). doi:10.1016/j.ces.2014.11.043.
2015
Crucifix, S. ; van der Rest, Camille ; Jimenez Mena, Norberto ; Jacques, Pascal ; Simar, Aude. Modelling thermal cycles and intermetallic growth during friction melt bonding of ULC steel to aluminium alloy 2024-T3. In: Science and Technology of Welding and Joining, Vol. 20, no. 4, p. 319-324 (2015). doi:10.1179/1362171815Y.0000000020.
2015
Mulay, Shantanu S. ; Becker, G. ; Vayrette, R. ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Galceran, M. ; Godet, S. ; Noels, L.. Multiscale fracture studies of polycrystalline silicon-based MEMS. In: Computational Mechanics, Vol. 55, no.1, p. 73-91 (2015).
2015
Mulay, Shantanu S. ; Becker, Gauthier ; Vayrette, Renaud ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Galceran, Montserrat ; Godet, Stéphane ; Noels, Ludovic. Multiscale modelling framework for the fracture of thin brittle polycrystalline films: application to polysilicon. In: Computational Mechanics : solids, fluids, engineered materials, aging, infrastructure, molecular dynamics, heat transfer, manufacturing processes, optimization, fracture and integrity, Vol. 55, no. 1, p. 73-91 (2015). doi:10.1007/s00466-014-1083-4.
2015
Tekoglu, C. ; Hutchinson, J.W. ; Pardoen, Thomas. On localization and void coalescence as a precursor to ductile fracture. In: Philosophical transactions of the Royal Society of London. A, Vol. 373, p. 2014.0121. doi:10.1098/rsta.2014.0121.
2015
Vayrette, Renaud ; Raskin, Jean-Pierre ; Pardoen, Thomas. On-chip fracture testing of freestanding nanoscale materials. In: Engineering Fracture Mechanics, Vol. 150, p. 222-238 (2015). doi:10.1016/j.engfracmech.2015.07.006.
2015
Van Velthem, Pascal ; Ballout, Wael ; Dumont, David ; Daoust, Daniel ; Sclavons, Michel ; Cordenier, François ; Pardoen, Thomas ; Devaux, Jacques ; Bailly, Christian. Phenoxy nanocomposite carriers for delivery of nanofillers in epoxy matrix for resin transfer molding (RTM)-manufactured composites. In: Composites Part A: Applied Science and Manufacturing, Vol. 76, p. 82-91. doi:10.1016/j.compositesa.2015.05.008.
2015
Genduso, G. ; Farrokhzad, H. ; Latré, Y. ; Darvishmanesh, S. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Polyvinylidene fluoride dense membrane for the pervaporation of methyl acetate-methanol mixtures. In: Journal of Membrane Science, Vol. 482, p. 128-136 (2015). doi:10.1016/j.memsci.2015.02.008.
2015
Ye, W. ; Wu, J. ; Ye, F. ; Zeng, H. ; Tran, A.T.K. ; Lin, J. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Potential of osmotic membrane crystallization using dense membranes for Na2CO3 production in a CO2 capture scenario. In: Crystal Growth & Design, Vol. 15, no.2, p. 695-705 (2015). doi:10.1021/cg501404v.
2015
Delannay, Francis. Sintering Kinetics Across Pore Closure Transition Accounting for Continuous Increase in Grain Coordination with Density. In: Journal of the American Ceramic Society, Vol. 98, no.11, p. 3476-3482 (2015). doi:10.1111/jace.13594.
2015
Luis Alconero, Patricia ; Van Der Bruggen, B.. The driving force as key element to evaluate the pervaporation performance of multicomponent mixtures. In: Separation and Purification Technology, Vol. 148, p. 94-102 (2015). doi:10.1016/j.seppur.2015.05.006.
2015
Shabadi, Rajashekhara ; Avettand-Fènoël, Marie Noëlle ; Simar, Aude ; Taillard, Roland ; Jain, P.K. ; Johnson, Roy. Thermal conductivity in yttria dispersed copper. In: Materials & Design, Vol. 65, p. 869-877 (2015). doi:10.1016/j.matdes.2014.09.083.
2015
Lin, J. ; Ye, W. ; Huang, J. ; Ricard, B. ; Baltaru, M.-C. ; Greydanus, B. ; Balta, S. ; Shen, J. ; Vlad, M. ; Sotto, A. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Toward Resource Recovery from Textile Wastewater: Dye Extraction, Water and Base/Acid Regeneration Using a Hybrid NF-BMED Process. In: ACS Sustainable Chemistry and Engineering, Vol. 3, no. 9, p. 1993-2001 (2015). doi:10.1021/acssuschemeng.5b00234.
2015
Lin, J. ; Tang, C.Y. ; Ye, W. ; Sun, S.-P. ; Hamdan, S.H. ; Volodin, A. ; Haesendonck, C.V. ; Sotto, A. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Unraveling flux behavior of superhydrophilic loose nanofiltration membranes during textile wastewater treatment. In: Journal of Membrane Science, Vol. 493, p. 690-702 (2015). doi:10.1016/j.memsci.2015.07.018.
Provided by DIAL