Journal articles
IMMC
SST/IMMC
Marvin Kusenberg ; Zayoud, Azd ; Martijn Roosen ; Hang Dao Thi ; Mehrdad Seifali Abbas-Abadi ; Andreas Eschenbacher ; Uros Kresovic ; Steven De Meester ; Kevin M. Van Geem. A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition. In: Fuel Processing Technology, Vol. 227, p. 107090 (2022). doi:10.1016/j.fuproc.2021.107090 (Soumis).
Kusenberg, Marvin ; Zayoud, Azd ; Roosen, Martijn ; Thi, Hang Dao ; Abbas-Abadi, Mehrdad Seifali ; Eschenbacher, Andreas ; Kresovic, Uros ; De Meester, Steven ; Van Geem, Kevin M.. A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition. In: Fuel Processing Technology, Vol. 227, p. 107090 (2022). doi:10.1016/j.fuproc.2021.107090 (Soumis).
Calero, Mathieu ; Grosshans, Holger ; Papalexandris, Miltiadis. A computational framework for electrification of liquid flows. In: Journal of Loss Prevention in the Process Industries, Vol. 74, no.c, p. 104637 (2021). doi:10.1016/j.jlp.2021.104637.
Farhadi, Afshin ; Hanert, Emmanuel. A fractional diffusion model of CD8+ T cells response to parasitic infection in the brain. In: Mathematical Modelling of Natural Phenomena, Vol. 17, no.3, p. 21 (2022). doi:10.1051/mmnp/2022003.
Lejeune, Maxime ; Moens, Maud ; Chatelain, Philippe. A meandering-capturing wake model coupled to rotor-based flow-sensing for operational wind farm flow prediction. In: Frontiers in Energy Research, (2022). doi:10.3389/fenrg.2022.884068 (Accepté/Sous presse).
Arseenko, Mariia ; Hannard, Florent ; Ding, Lipeng ; Zhao, Lv ; Maire, Eric ; Villanova, Julie ; Idrissi, Hosni ; Simar, Aude. A new healing strategy for metals: Programmed damage and repair. In: Acta Materialia, Vol. 238, p. 118241 (2022). doi:10.1016/j.actamat.2022.118241.
Coquelet, Marion ; Bricteux, Laurent ; Moens, Maud ; Chatelain, Philippe. A reinforcement-learning approach for individual pitch control. In: Wind Energy, (2022). doi:10.1002/we.2734.
Vanthournhout, Léna ; Szewczyk, Jérôme ; Duisit, Jérôme ; Lengelé, Benoît ; Raucent, Benoît ; Herman, Benoît. ASTEMA: Design and preliminary performance assessment of a novel tele-microsurgery system. In: Mechatronics, Vol. 81, no.102689, p. 11 pages (2022). doi:10.1016/j.mechatronics.2021.102689.
Ügdüler, Sibel ; De Somer, Tobias ; Van Geem, Kevin M. ; De Wilde, Juray ; Roosen, Martijn ; Deprez, Bram ; De Meester, Steven. Analysis of the kinetics, energy balance and carbon footprint of the delamination of multilayer flexible packaging films via carboxylic acids. In: Resources, Conservation and Recycling, Vol. 181, p. 106256 (2022). doi:10.1016/j.resconrec.2022.106256.
De Paepe, Ward ; Pappa, Alessio ; Coppitters, Diederik ; Montero Carrero, Marina ; Tsirikoglou, Panagiotis ; Contino, Francesco. Control Strategy Development for Optimized Operational Flexibility From Humidified Micro Gas Turbine: Saturation Tower Performance Assessment. In: Journal of Engineering for Gas Turbines and Power, Vol. 144, no.6, p. 061012 (2022). doi:https://doi.org/10.1115/1.4053704. doi:https://doi.org/10.1115/1.4053704.
Moens, Maud ; Chatelain, Philippe. Correlations Between Wake Phenomena and Fatigue Loads Within Large Wind Farms: A Large-Eddy Simulation Study. In: Frontiers in Energy Research, Vol. 10, p. 881532 (2022). doi:10.3389/fenrg.2022.881532.
Sparenberg, Marie-Charlotte ; Chergaoui, Sara ; Sang Sefidi, Vida ; Luis, Patricia. Crystallization control via membrane distillation-crystallization: A review. In: Desalination, Vol. 519, no.115315, p. 115315 (2022). doi:10.1016/j.desal.2021.115315.
Avettand-Fènoël, M.-N. ; Gomes Affonseca Netto, Nelson ; Simar, Aude ; Marinova, M. ; Taillard, R.. Design of a metallic glass dispersion in pure copper by friction stir processing. In: Journal of Alloys and Compounds, Vol. 907, p. 164522 (2022). doi:10.1016/j.jallcom.2022.164522.
Lezaack, Matthieu Baudouin ; Simar, Aude ; Marchal, Yannick ; Steinmetz, Martin ; Faes, Koen ; Saraiva Esteves Pacheco De Almeida, João. Dissimilar friction welding of NiTi shape memory alloy and steel reinforcing bars for seismic performance. In: Science and Technology of Welding and Joining, Vol. 27, no. 6, p. 418-428 (2022). doi:10.1080/13621718.2022.2061692.
Ransquin, Ignace ; Duponcheel, Matthieu ; Chatelain, Philippe. Dynamics of the Wake Vortices of a Two-aircraft Formation, Hazard Assessment at Large Distances and Sensitivity Analysis. In: AIAA Paper, Vol. SCITECH 2022 Forum, no., p. 2022-1198 (2022). doi:10.2514/6.2022-1198.
Saraiva Rocha da Silva, Fernando ; Delmelle, Renaud ; Georgiadis, Christos ; Proost, Joris. Effect of pore size and electrolyte flow rate on the bubble removal efficiency of 3D pure Ni foam electrodes during alkaline water electrolysis. In: Journal of Environmental Chemical Engineering, Vol. 10, p. 107648 (2022). doi:10.1016/j.jece.2022.107648.
Léger, Jean ; Leyssens, Lisa ; Kerckhofs, Greet ; De Vleeschouwer, Christophe. Ensemble learning and test-time augmentation for the segmentation of mineralized cartilage versus bone in high-resolution microCT images. In: Computers in Biology and Medicine, Vol. 148, no.-, p. 105932 (2022). doi:10.1016/j.compbiomed.2022.105932.
Farhadi, Afshin ; Hanert, Emmanuel. Front Propagation of Exponentially Truncated Fractional-Order Epidemics. In: Fractal and Fractional, Vol. 6, no. 2, p. 53 (2022). doi:10.3390/fractalfract6020053.
Figueiredo, Joana ; Thomas, Christopher J. ; Deleersnijder, Eric ; Lambrechts, Jonathan ; Baird, Andrew H. ; Connolly, Sean R. ; Hanert, Emmanuel. Global warming decreases connectivity among coral populations. In: Nature Climate Change, Vol. 12, p. 83-87 (2021). doi:10.1038/s41558-021-01248-7.
Xu, Xiao ; Hartanto, Yusak ; Nikolaeva, Daria ; He, Zirui ; Chergaoui, Sara ; Luis, Patricia. High-performance ZIF-8-biopolymer chitosan mixed-matrix pervaporation membrane for methanol-dimethyl carbonate separation. In: Separation and Purification Technology, Vol. 293, no.121085, p. 121085 (2022). doi:10.1016/j.seppur.2022.121085.
Santos Macías, Juan Guillermo ; Zhao, Lv ; Tingaud, David ; Bacroix, Brigitte ; Pyka, Grzegorz ; van der Rest, Camille ; Ryelandt, Laurence ; Simar, Aude. Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties. In: Journal of Materials Science, Vol. Special issue on Additive Manufacturing (2022). doi:10.1007/s10853-022-07027-9.
Coppitters, Diederik ; Verleysen, Kevin ; De Paepe, Ward ; Contino, Francesco. How can renewable hydrogen compete with diesel in public transport? Robust design optimization of a hydrogen refueling station under techno-economic and environmental uncertainty. In: Applied Energy, Vol. 312, no., p. 118694 (2022). doi:10.1016/j.apenergy.2022.118694.
Yang, Yun ; Guan, Weibing ; Deleersnijder, Eric ; He, Zhiguo. Hydrodynamic and sediment transport modelling in the Pearl River Estuary and adjacent Chinese coastal zone during Typhoon Mangkhut. In: Continental Shelf Research, Vol. 233, p. 104645 (2022). doi:10.1016/j.csr.2022.104645.
Dehez, Bruno ; François, Guillaume. Impact of slit configuration on eddy current and supply current losses in PCB winding of slotless PM machines. In: IEEE Transactions on Industry Applications, Vol. 1, no.1, p. 1-1 (2022). doi:10.1109/TIA.2022.3179253.
Figeac, Florence ; Tencerova, Michaela ; Ali, Dalia ; Andersen, Thomas L ; Appadoo, Dan Rémi Christiansen ; Kerckhofs, Greet ; Ditzel, Nicholas ; Kowal, Justyna M ; Rauch, Alexander ; Kassem, Moustapha. Impaired bone fracture healing in type 2 diabetes is caused by defective functions of skeletal progenitor cells. In: Stem Cells, Vol. -, no.-, p. - (2022). doi:10.1093/stmcls/sxab011.
Rosso, angelica ; Saraiva Esteves Pacheco De Almeida, João ; Jimenez-Roa, Lisandro A ; Beyer, Katrin. Instability of Thin Concrete Walls with a Single Layer of Reinforcement under Cyclic Loading: Numerical Simulation and Improved Equivalent Boundary Element Model for Assessment. In: Journal of Earthquake Engineering, Vol. 26, no. 1, p. 493-524 (2022). doi:10.1080/13632469.2019.1691679.
Cafiero, Marianna ; Dias, Véronique ; Iavarone, Salvatore ; Coussement Axel ; Jeanmart, Hervé ; Parente, Alessandro. Investigation of temperature correction methods for fine wire thermocouple radiation losses in low-pressure flat premixed laminar flames. In: Combustion and Flame, Vol. 244, p. 112248 (2022). doi:10.1016/j.combustflame.2022.112248.
Croquer, Sergio ; Poncet, Sébastien ; Moreau, Stephane ; Lamberts, Olivier ; Bartosiewicz, Yann. Large Eddy Simulation of a Supersonic Air Ejector. In: Applied Thermal Engineering, (2022) (Accepté/Sous presse).
Sula, Constantin ; Grosshans, Holger ; Papalexandris, Miltiadis. Large‐Eddy Simulations of Spray A Flames Using Explicit Coupling of the Energy Equation with the FGM Database. In: Flow, Turbulence and Combustion, Vol. 109, no., p. 193-223 (2022). doi:10.1007/s10494-022-00320-2.
Meurice, Robin ; Martínez-Aranda, Sergio ; Ebrahimi, Masoumeh ; García-Navarro, Pilar ; Soares Frazao, Sandra. Laser profilometry to measure the bed evolution in a dam-break flow. In: Journal of Hydraulic Research, Vol. 60, no. 5, p. 725-737 (2022). doi:10.1080/00221686.2022.2059584.
Jin, Pengrui ; Chergaoui, Sara ; Zheng, Junfeng ; Volodine, Alexander ; Zhang, Xin ; Liu, Ziyuan ; Luis, Patricia ; Van der Bruggen, Bart. Low-pressure highly permeable polyester loose nanofiltration membranes tailored by natural carbohydrates for effective dye/salt fractionation. In: Journal of Hazardous Materials, Vol. 421, no.126716, p. 126716 (2022). doi:10.1016/j.jhazmat.2021.126716.
Schlaefer, Jodie ; Carter, Alexandra ; Choukroun, Severine ; Coles, Robert ; Critchell, Kay ; Lambrechts, Jonathan ; Rasheed, Michael ; Tol, Samantha ; Grech, Alana. Marine plant dispersal and connectivity measures differ in their sensitivity to biophysical model parameters. In: Environmental Modelling & Software, Vol. 149, p. 105313 (2022). doi:10.1016/j.envsoft.2022.105313.
Song, Lubin ; Zhao, Lv ; Ding, Lipeng ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg. In: Materials Science and Engineering: A, Vol. 832, p. 142484 (2022). doi:10.1016/j.msea.2021.142484.
Madanikashani, Sepehr ; Vandewalle, Laurien A. ; De Meester, Steven ; De Wilde, Juray ; Van Geem, Kevin M.. Multi-Scale Modeling of Plastic Waste Gasification: Opportunities and Challenges. In: Materials, Vol. 15, p. 4215 (2022). doi:10.3390/ma15124215.
Lin, Fengxiang ; Delannay, Laurent. Non-uniform grain boundary migration during static recrystallization: A cellular automaton study. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, (2022) (Accepté/Sous presse).
Beuken, Loïc ; Cheffert, Olivier ; Tutueva, Aleksandra ; Butusov, Denis ; Legat, Vincent. Numerical Stability and Performance of Semi-Explicit and Semi-Implicit Predictor–Corrector Methods. In: Mathematics, Vol. 10, no.12, p. 2015 (2022). doi:10.3390/math10122015.
Coppin, Nathan ; Constant, Matthieu ; Lambrechts, Jonathan ; Dubois, Frédéric ; Legat, Vincent. Numerical analysis of the drag on a rigid body in an immersed granular flow. In: Computational Particle Mechanics, Vol. 9, p. 393-406 (2022). doi:10.1007/s40571-021-00418-w.
Riffard, Anouk ; Papalexandris, Miltiadis. Numerical study of the collapse of columns of sand immersed in water using two-phase flow modeling. In: International Journal of Multiphase Flow, Vol. 153, p. 104143 (2022).
Idrissi, Hosni ; Carrez, Philippe ; Cordier, Patrick. On amorphization as a deformation mechanism under high stresses. In: Current Opinion in Solid State and Materials Science, Vol. 26, no.1, p. 100976 (2022). doi:10.1016/j.cossms.2021.100976.
Marichal, Joauma ; Papalexandris, Miltiadis. On the dynamics of the large scale circulation in turbulent convection with a free-slip upper boundary. In: International Journal of Heat and Mass Transfer, Vol. 183, no.C, p. 122220 (2022). doi:10.1016/j.ijheatmasstransfer.2021.122220.
Ding, Lipeng ; Sapanathan, Thaneshan ; Schryvers, Dominique ; Simar, Aude ; Idrissi, Hosni. On the formation of antiphase boundaries in Fe4Al13 intermetallics during a high temperature treatment. In: Scripta Materialia, Vol. 215, p. 114726 (2022). doi:10.1016/j.scriptamat.2022.114726.
Varsakelis, Christos ; Gelbgras, Valérie ; Papalexandris, Miltiadis. On the wall boundary condition for the velocity in concentrated suspensions. In: Journal of Non-Newtonian Fluid Mechanics, Vol. 305, no., p. 104830 (2022). doi:10.1016/j.jnnfm.2022.104830.
Wendo, Kevin ; Barbier, Olivier ; Bollen, Xavier ; Schubert, Thomas ; Lejeune, Thierry ; Raucent, Benoît ; Olszewski, Raphael. Open-Source 3D Printing in the Prosthetic Field—The Case of Upper Limb Prostheses: A Review. In: Machines, Vol. 10, no.6, p. 413 [1-35] (2022). doi:10.3390/machines10060413.
Kusenberg, Marvin ; Zayoud, Azd ; Kim Ragaert ; Steven De Meester ; Kevin Van Geem. Opportunities and challenges for the application of post-consumer plastic waste pyrolysis oils as steam cracker feedstocks: To decontaminate or not to decontaminate?. In: Waste Management, Vol. 138, p. 83-115 (2022). doi:10.1016/j.wasman.2021.11.009 (Soumis).
Colla, Martin ; Blondeau, Julien ; Jeanmart, Hervé. Optimal Use of Lignocellulosic Biomass for the Energy Transition, Including the Non-Energy Demand: The Case of the Belgian Energy System. In: Frontiers in Energy Research, Vol. 10 (2022). doi:10.3389/fenrg.2022.802327 (Soumis).
Hilhorst, Antoine ; Pardoen, Thomas ; Jacques, Pascal. Optimisation of the essential work of fracture method for characterization of the fracture resistance of metallic sheets. In: Engineering Fracture Mechanics, Vol. 268, p. 108442 (2022). doi:10.1016/j.engfracmech.2022.108442.
Garcia Alvarez, Mar ; Sang Sefidi, Vida ; Beguin, Marine ; Collet, Alexandre ; Bahamonde, Raúl ; Luis Alconero, Patricia. Osmotic Membrane Distillation Crystallization of NaHCO3. In: Energies, Vol. 15, no. 2682, p. 1-13 (2022). doi:10.3390/en15072682.
Fiore, Matilde ; Koloszar, Lilla ; Fare, Clynde ; Mendez,Miguel Alfonso ; Duponcheel, Matthieu ; Bartosiewicz, Yann. Physics-constrained machine learning for thermal turbulence modelling at low Prandtl numbers. In: International Journal of Heat and Mass Transfer, (2022) (Accepté/Sous presse).
Ding, Lipeng ; Hilhorst, Antoine ; Idrissi, Hosni ; Jacques, Pascal. Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy. In: Acta Materialia, Vol. 234, p. 118049 (2022). doi:10.1016/j.actamat.2022.118049.
Tipler, S. ; D’Alessio, G. ; Van Haute, Q. ; Parente, A. ; Contino, Francesco ; Coussement, A.. Predicting octane numbers relying on principal component analysis and artificial neural network. In: Computers & Chemical Engineering, Vol. 1, no.1, p. 107784 (2022). doi:10.1016/j.compchemeng.2022.107784.
Zayoud, Azd ; Dao Thi, Hang ; Kusenberg, Marvin ; Eschenbacher, Andreas ; Kresovic, Uros ; Alderweireldt, Nick ; Djokic, Marko ; Van Geem, Kevin M.. Pyrolysis of end-of-life polystyrene in a pilot-scale reactor: Maximizing styrene production. In: Waste Management, Vol. 139, p. 85-95 (2022). doi:10.1016/j.wasman.2021.12.018 (Soumis).
Coppitters, Diederik ; Tsirikoglou, Panagiotis ; De Paepe, Ward ; Kyprianidis, Konstantinos ; Kalfas, Anestis ; Contino, Francesco. RHEIA: Robust design optimization of renewable Hydrogen and dErIved energy cArrier systems. In: Journal of Open Source Software, Vol. 7, no.75, p. 4370 (2022). doi:10.21105/joss.04370.
Hoult, Ryan ; Saraiva Esteves Pacheco De Almeida, João. Residual displacements of reinforced concrete walls detailed with conventional steel and shape memory alloy rebars. In: Engineering Structures, Vol. 256, no.1 April, p. 114002 (2022). doi:10.14428/DVN/A1FZT9.
Zhao, Lv ; Song, Lubin ; Santos Macias, Juan Guillermo ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg. In: Additive Manufacturing, Vol. 56, p. 102914 (2022). doi:10.1016/j.addma.2022.102914.
Heidarzadeh, Akbar ; Mohammadzadeh, Roghayeh ; Jafarian, Hamid Reza ; Pruncu, Catalin ; Simar, Aude. Role of geometrically necessary dislocations on mechanical properties of friction stir welded single-phase copper with medium stacking fault energy. In: Journal of Materials Research and Technology, Vol. 16, p. 194-200 (2022). doi:10.1016/j.jmrt.2021.11.162.
Choisez,Laurine ; Ding, Lipeng ; Marteleur, Matthieu ; Kashiwar, Ankush ; Idrissi, Hosni ; Jacques, Pascal. Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy. In: Acta Materialia, Vol. 235, p. 118088 (2022).
Reijnders, Daan ; Deleersnijder, Eric ; Sebille, Erik. Simulating Lagrangian Subgrid‐Scale Dispersion on Neutral Surfaces in the Ocean. In: Journal of Advances in Modeling Earth Systems, Vol. 14, no.2, p. (2022). doi:10.1029/2021ms002850.
Hardy, Baptiste ; Simonin, Olivier ; De Wilde, Juray ; Winckelmans, Grégoire. Simulation of the flow past random arrays of spherical particles: Microstructure-based tensor quantities as a tool to predict fluid-particle forces. In: International Journal of Multiphase Flow, Vol. 149, p. 103970 (2022). doi:10.1016/j.ijmultiphaseflow.2021.103970.
Riehl, James ; Hufstedler, Esteban ; Chatelain, Philippe ; Hendrickx, Julien. String stability of energy-saving aircraft formations. In: Journal of Guidance, Control, and Dynamics : devoted to the technology of dynamics and control, (2022) (Accepté/Sous presse).
Minette, Florent ; de Almeida, Luis Calamote ; Feinstein, Jonathan ; De Wilde, Juray. Structured ZoneFlowTM-Bayonet Steam Reforming Reactor for Reduced Firing and Steam Export: Pressure Drop and Heat Transfer Modelling and Evaluation of the Reactor Performance. In: Chemical Engineering Journal Advances, Vol. 10, p. 100258 (2022). doi:10.1016/j.ceja.2022.100258.
Pascart, Tristan ; Falgayrac, Guillaume ; Cortet, Bernard ; Paccou, Julien ; Bleuse, Maverick ; Coursier, Raphaël ; Putman, Sophie ; Quinchon, Jean-François ; Bertheaume, Nicolas ; Delattre, Jerome ; Marchandise, Pierre ; Cultot, Aurélie ; Norberciak, Laurène ; Kerckhofs, Greet ; Budzik, Jean-François. Subchondral involvement in osteonecrosis of the femoral head: insight on local composition, microstructure and vascularization.. In: Osteoarthritis and cartilage, (2022). doi:10.1016/j.joca.2022.05.003 (Accepté/Sous presse).
Lezaack, Matthieu Baudouin ; Hannard, Florent ; Simar, Aude. Understanding the ductility versus toughness and bendability decoupling of large elongated and fine grained Al 7475 - T6 alloy. In: Materials Science and Engineering: A, Vol. 839, p. 142816 (2022). doi:10.1016/j.msea.2022.142816.
Aram Bahmani ; Hannard, Florent ; J. William Pro ; Francois Barthelat. Vibration-driven fabrication of dense architectured panels. In: Matter, Vol. 5, no.3, p. 899-910 (2022). doi:10.1016/j.matt.2022.01.002.
Leyssens, Lisa ; Pestiaux, Camille ; Kerckhofs, Greet. A Review of Ex Vivo X-ray Microfocus Computed Tomography-Based Characterization of the Cardiovascular System. In: International Journal of Molecular Sciences, Vol. 22, no.6, p. 3263 (2021). doi:10.3390/ijms22063263.
Friess, Karel ; Izák, Pavel ; Kárászová, Magda ; Pasichnyk, Mariia ; Lanč, Marek ; Nikolaeva, Daria ; Luis Alconero, Patricia ; Jansen, Johannes Carolus. A Review on Ionic Liquid Gas Separation Membranes. In: Membranes, Vol. 11, no.2, p. 97 (2021). doi:10.3390/membranes11020097.
Duchatelet, Laurent ; Marion, Raphaël ; Mallefet, Jérôme. A Third Luminous Shark Family: Confirmation of Luminescence Ability for Zameus squamulosus (Squaliformes; Somniosidae) . In: Photochemistry and Photobiology, , p. 1-6 (2021). doi:10.1111/php.13393.
Martin, J. ; Ruyer, P. ; Duponcheel, Matthieu ; Bartosiewicz, Yann. A first experimental study of the gravity-driven flashing of superheated water in a heated pool. In: International Journal of Heat and Mass Transfer, (2021) (Soumis).
De Lorenzo, M. ; Pantono, A. ; Pelanti, M. ; Seynhaeve, Jean-Marie ; Di Matteo, Michele ; Lafon, P. ; Bartosiewicz, Yann. A hyperbolic phase-transition model coupled to tabulated EoS for metastable two-phase flows. In: Nuclear Engineering and Design, (2021). doi:10.1016/j.nucengdes.2020.110954.
Colognesi, Victor ; Ronsse, Renaud ; Chatelain, Philippe. A model coupling biomechanics and fluid dynamics for the simulation of controlled flapping flight. In: Bioinspiration & Biomimetics, Vol. 16, no.2, p. 026023 (2021). doi:10.1088/1748-3190/abdd9c.
Blanchet, Laurent ; Achiche, Sofiane ; Docquier, Quentin ; Fisette, Paul ; Raison, Maxime. A procedure to optimize the geometric and dynamic designs of assistive upper limb exoskeletons. In: Multibody System Dynamics, Vol. 51, no.2, p. 221-245 (2020). doi:10.1007/s11044-020-09766-6.
Adriaens, Xavier ; Henrotte, François ; Geuzaine, Christophe. Adjoint state method for time-harmonic scattering problems with boundary perturbations. In: Journal of Computational Physics, Vol. 428 (2021). doi:10.1016/j.jcp.2020.109981.
Xie, Xinliang ; Yin, Shuo ; Raoelison, Rija-nirina ; Chen, Chaoyue ; Verdy, Christophe ; Li, Wenya ; Ji, Gang ; Ren, Zhongming ; Liao, Hanlin. Al matrix composites fabricated by solid-state cold spray deposition: A critical review. In: Journal of Materials Science & Technology, Vol. 86, p. 20-55 (2021). doi:10.1016/j.jmst.2021.01.026.
K. P. Shrestha ; Lhuillier, Charles ; A. A. Barbosa ; Pierre Bréquigny ; Contino, Francesco ; C. Mounaïm-Rousselle ; L. Seidel ; F. Mauss. An experimental and modeling study of ammonia with enriched oxygen content and ammonia/hydrogen laminar flame speed at elevated pressure and temperature. In: Proceedings of the Combustion Institute, Vol. 38, no.2, p. 2163-2174 (2021). doi:10.1016/j.proci.2020.06.197.
Metsue, Antoine ; Debroeyer, Romain ; Poncet, Sébastien ; Bartosiewicz, Yann. An improved thermodynamic model for supersonic real-gas ejectors using the compound-choking theory. In: Energy, Vol. 382, no. 111362 (2021). doi:10.1016/j.energy.2021.121856.
Beckers, J. ; Verstraten, T. ; Verrelst, B. ; Contino, Francesco ; Van Mierlo, J.. Analysis of the dynamics of a slider-crank mechanism locally actuated with an act-and-wait controller. In: Mechanism and Machine Theory, Vol. 159, no.1, p. 104253 (2021). doi:10.1016/j.mechmachtheory.2021.104253.
Coheur, Joffrey ; Torres-Herrador, Francisco ; Chatelain, Philippe ; Mansour, Nagi N. ; Magin, Thierry E. ; Arnst, Maarten. Analytical solution for multi-component pyrolysis simulations of thermal protection materials. In: Journal of Materials Science, Vol. 56, no. 11, p. 6845-6860 (2021). doi:10.1007/s10853-020-05727-8.
Bagherian, Mohammad Ali ; Mehranzamir, Kamyar ; Rezania, Shahabaldin ; Abdul-Malek, Zulkurnain ; Pour, Amin Beiranvand ; Alizadeh, Seyed Morteza. Analyzing Utilization of Biomass in Combined Heat and Power and Combined Cooling, Heating, and Power Systems. In: Processes, Vol. 9, no.6 (2021). doi:10.3390/pr9061002.
Ding, Lipeng ; Zhao, Lv ; Weng, Yaoyao ; Schryvers, Dominique ; Liu, Qing ; Idrissi, Hosni. Atomic-scale investigation of the heterogeneous precipitation in the E (Al18Mg3Cr2) dispersoid of 7075 aluminum alloy . In: Journal of Alloys and Compounds, Vol. 851, p. 156890 (2021). doi:10.1016/j.jallcom.2020.156890.
Papalexandris, Miltiadis. Attenuation of gaseous detonations by porous media of fine microstructure. In: Combustion and Flame, Vol. 232, no., p. 111518 (2021). doi:10.1016/j.combustflame.2021.111518.
Bawin, Arthur ; Henrotte, François ; Remacle, Jean‐François. Automatic feature‐preserving size field for three‐dimensional mesh generation. In: International Journal for Numerical Methods in Engineering, Vol. 122, no.18, p. 4825-4847 (2021). doi:10.1002/nme.6747.
Lezaack, Matthieu Baudouin ; Simar, Aude. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments. In: Materials Science and Engineering: A, Vol. 807, p. 140901 (2021). doi:10.1016/j.msea.2021.140901.
Schlaefer, Jodie A. ; Wolanski, Eric ; Lambrechts, Jonathan ; Kingsford, Michael J.. Behavioural and oceanographic isolation of an island-based jellyfish (Copula sivickisi, Class Cubozoa) population. In: Scientific Reports, Vol. 11, no. 1, p. 10280 [1-2] (2021). doi:10.1038/s41598-021-89755-7.
Nutenki, Rajendar ; Van Velthem, Pascal ; Kuete, Martial ; Lezaak, Matthieu ; Destoop, Vincent ; Ballout, Wael ; Pardoen, Thomas ; Bailly, Christian. Bio-Sourced Poly l-Lactide-Flax Composites with Close to Maximum Stiffness at Low Fiber Content through Two-Stage Annealing. In: Macromolecular Materials and Engineering, , p. 2100327 (2021). doi:10.1002/mame.202100327.
Nunez Manzano, Manuel ; Gonzalez Quiroga, Arturo ; Perreault, Patrice ; Madanikashani, Sepehr ; Vandewalle, Laurien A. ; Marin, Guy B. ; Heynderickx, Geraldine J. ; Van Geem, Kevin M.. Biomass fast pyrolysis in an innovative gas-solid vortex reactor: Experimental proof of concept. In: Journal of Analytical and Applied Pyrolysis, Vol. 156, p. 105165 (2021). doi:10.1016/j.jaap.2021.105165.
Bagherian, Mohammad Ali ; Mehranzamir, Kamyar ; Pour, Amin Beiranvand ; Rezania, Shahabaldin ; Taghavi, Elham ; Nabipour-Afrouzi, Hadi ; Dalvi-Esfahani, Mohammad ; Alizadeh, Seyed Morteza. Classification and Analysis of Optimization Techniques for Integrated Energy Systems Utilizing Renewable Energy Sources: A Review for CHP and CCHP Systems. In: Processes, Vol. 9, no.2, p. 1-36 (2021). doi:10.3390/pr9020339.
Aversano, Gianmarco ; D’Alessio, Giuseppe ; Coussement, Axel ; Contino, Francesco ; Parente, Alessandro. Combination of polynomial chaos and Kriging for reduced-order model of reacting flow applications. In: Results in Engineering, Vol. 10, no.1, p. 100223 (2021). doi:10.1016/j.rineng.2021.100223.
Jiménez Mena, Norberto ; Sapanathan, Thaneshan ; Jacques, Pascal ; Simar, Aude. Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds. In: Engineering Fracture Mechanics, Vol. 249, no. 107756 (2021). doi:10.1016/j.engfracmech.2021.107756.
Sergio Martínez-Aranda ; Meurice, Robin ; Soares Frazao, Sandra ; Pilar García-Navarro. Comparative Analysis of HLLC- and Roe-Based Models for the Simulation of a Dam-Break Flow in an Erodible Channel with a 90° Bend. In: Water, Vol. 13, no.13, p. 1840 (2021). doi:10.3390/w13131840.
Duchaussoy, Amandine ; Sauvage, Xavier ; Deschamps, Alexis ; De Geuser, Frederic ; Renou, Gilles ; Horita, Zenji. Complex interactions between precipitation, grain growth and recrystallization in a severely deformed Al-Zn-Mg-Cu alloy and consequences on the mechanical behavior. In: Materialia, Vol. 15, p. 101028 (2021). doi:10.1016/j.mtla.2021.101028.
Croquer, Sergio ; Yang, Yu-Fang ; Metsue, Antoine ; Bartosiewicz, Yann ; Poncet, Sébastien. Compound-Choking Theory for Supersonic Ejectors Working with Real Gas. In: Energy, Vol. 227, no. 120396 (2021) (Accepté/Sous presse).
Croquer, Sergio ; Fang, Yu ; Metsue, Antoine ; Bartosiewicz, Yann ; Poncet, Sébastien. Compound-choking theory for supersonic ejectors working with real gas. In: Energy, Vol. 227 (2021). doi:10.1016/j.energy.2021.120396.
Delannay, Francis. Contribution of the nucleation and recovery of disconnections to shear viscosity in diffusional creep. In: Materialia, Vol. 20, p. 101194 (2021). doi:10.1016/j.mtla.2021.101194.
Zhukova, Maria ; Kotipalli, Ratan ; Poncelet, Olivier ; Samain, Louise ; Fourdrinier, Lionel ; Flandre, Denis. Correlation and optimization of the optoelectrical properties of DC magnetron-sputtered Cu2ZnSnS4 absorber layer as a function of the material composition. In: Materials Science in Semiconductor Processing, Vol. 121, no. 105367, p. 1-11 (2021). doi:10.1016/j.mssp.2020.105367.
Poncelet, Olivier ; Marteleur, Matthieu ; van der Rest, Camille ; Rigo, O. ; Adrien, J. ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion. In: Additive Manufacturing, Vol. 38, p. 101801 (2021). doi:10.1016/j.addma.2020.101801.
Samaee, Vahid ; Dupraz, Maxime ; Pardoen, Thomas ; Van Swygenhoven, Helena ; Schryvers, Dominique ; Idrissi, Hosni. Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal. In: Nature Communications, Vol. 12, no.1, p. 962 (2021). doi:10.1038/s41467-021-21296-z.
Zoungrana, Laetitia ; Sidibé, Sayon dit Sadio ; Herman, Benoît ; Coulibaly, Yézouma ; Jeanmart, Hervé. Design of a Gasification Reactor for Manufacturing and Operation in West Africa. In: Designs, Vol. 5, no.4, p. 76 (2021). doi:10.3390/designs5040076.
Kapepula Lumami, Vercus ; Ndikumana, Théophie ; Bulen Tamungang, Njoyim Estella ; Musibono, Dieu-Donné ; Lukusa Mbaya, Alain ; Nsimanda Ipey, Camille ; Luis Alconero, Patricia ; Van Der Bruggen, Bart. Determination of the Toxicological Risk of Urban Waste from the City of Uvira Dumped into the North-Western Coast in Lake Tanganyika (Democratic Republic of Congo). In: Journal of Environmental Protection, Vol. 12, no.10, p. 677-693 (2021). doi:10.4236/jep.2021.1210041.
Lucas, Lisa ; Deleersnijder, Eric. Diagnostic timescales: old concepts, new methods and the ageless power of simplification. In: CERF's Up!, Vol. 47, no. 1, p. 14-15 (2021).
Hilhorst, Antoine ; Jacques, Pascal. Diffusion Multiples as a Tool to Efficiently Explore the Composition Space of High Entropy Alloys. In: Journal of Phase Equilibria and Diffusion, Vol. online (2021). doi:10.1007/s11669-021-00902-z.
Duponcheel, Matthieu ; Bartosiewicz, Yann. Direct Numerical Simulation of Turbulent Heat Transfer at Low Prandtl Numbers in Planar Impinging Jets. In: International Journal of Heat and Mass Transfer, Vol. 173, no. 121179 (2021). doi:10.1016/j.ijheatmasstransfer.2021.121179.
Saraiva Rocha da Silva, Fernando ; Proost, Joris. Discriminating between the effect of pulse width and duty cycle on the hydrogen generation performance of 3-D electrodes during pulsed water electrolysis. In: International Journal of Hydrogen Energy, Vol. 46, no.57, p. 28925-28935 (2021). doi:10.1016/j.ijhydene.2020.11.232.
Marteleur, Matthieu ; Leclerc, Julien ; Colla, Marie-Stéphane ; Nguyen, Van-Dung ; Noels, Ludovic ; Pardoen, Thomas. Ductile fracture of high strength steels with morphological anisotropy, Part I: Characterization, testing, and void nucleation law. In: Engineering Fracture Mechanics, Vol. 244, p. 107569 (2021). doi:10.1016/j.engfracmech.2021.107569.
Leclerc, Julien ; Marteleur, Matthieu ; Colla, Marie-Stéphane ; Pardoen, Thomas ; Noels, Ludovic ; Nguyen, Van-Dung. Ductile fracture of high strength steels with morphological anisotropy, Part II: Nonlocal micromechanics-based modeling. In: Engineering Fracture Mechanics, Vol. 248, p. 107716 (2021). doi:10.1016/j.engfracmech.2021.107716.
Franceschi, Mattia ; Miotti Bettanini, Alvise ; Pezzato, Luca ; Dabalà, Manuele ; Jacques, Pascal. Effect of Multi-Step Austempering Treatment on the Microstructure and Mechanical Properties of a High Silicon Carbide-Free Bainitic Steel with Bimodal Bainite Distribution. In: Metals, Vol. 11, no.12, p. 2055 (2021). doi:10.3390/met11122055.
Xie, Xinliang ; Chen, Chaoyue ; Chen, Zhe ; Addad, Ahmed ; Xie, Yingchun ; Wu, Hongjian ; Verdy, Christophe ; Wang, Yan ; Wang, Jiang ; Ren, Zhongming ; Ji, Gang ; Liao, Hanlin. Effect of annealing treatment on microstructure and mechanical properties of cold sprayed TiB2/AlSi10Mg composites. In: Surfaces and Interfaces, Vol. 26 (2021). doi:10.1016/j.surfin.2021.101341.
Van Eygen, Gilles ; Van der Bruggen, Bart ; Buekenhoudt, Anita ; Luis Alconero, Patricia. Efficient membrane-based affinity separations for chemical applications: A review. In: Chemical Engineering and Processing - Process Intensification, Vol. 169, p. 108613 (2021). doi:10.1016/j.cep.2021.108613.
Gheysen, Julie ; Marteleur, Matthieu ; van der Rest, Camille ; Simar, Aude. Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy. In: Materials & Design, Vol. 199, p. 109433 (2021). doi:10.1016/j.matdes.2020.109433.
Li, Jian ; Liu, Riri ; Zhu, Junyong ; Li, Xin ; Yuan, Shushan ; Tian, Miaomiao ; Wang, Jing ; Luis Alconero, Patricia ; Van der Bruggen, Bart ; Lin, Jiuyang. Electrophoretic nuclei assembly of MOFs in polyamide membranes for enhanced nanofiltration. In: Desalination, Vol. 512, p. 115125 (2021). doi:10.1016/j.desal.2021.115125.
Voleppe, Quentin ; Ballout, Wael ; Van Velthem, Pascal ; Bailly, Christian ; Pardoen, Thomas. Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient. In: Polymer, Vol. 218, p. 123497 (2021). doi:10.1016/j.polymer.2021.123497.
Dupont, Elise ; Germain, Marc ; Jeanmart, Hervé. Estimate of the societal energy return on investment (EROI). In: BioPhysical Economics and Sustainability, Vol. 6, no. 2 (2021). doi:10.1007/s41247-021-00084-9.
Sparenberg, Marie-Charlotte. Experimental mass transfer comparison between vacuum and direct contact membrane distillation for the concentration of carbonate solutions. In: Separation and Purification Technology, Vol. 275, p. 119193 (2021). doi:10.1016/j.seppur.2021.119193.
De Wilde, Juray ; Dutta, Subhajit ; Pati, Jnyana Ranjan ; De Broqueville, Axel. Experimental study of the temperature distribution and water evaporation in an axial dual-zone vortex chamber spray dryer. In: Drying Technology : an international journal, Vol. online (2021). doi:10.1080/07373937.2021.1966635.
Caprace, Denis-Gabriel ; Gillis, Thomas ; Chatelain, Philippe. FLUPS - A Fourier-based Library of Unbounded Poisson Solvers. In: SIAM Journal on Scientific Computing, Vol. 43. doi:10.1137/19M1303848.
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Buffière, Jean-Yves ; Van Hooreweder, Brecht ; Simar, Aude. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions. In: Materials & Design, Vol. 210, p. 110084 (2021). doi:10.1016/j.matdes.2021.110084.
Dupont, Elise ; Germain, Marc ; Jeanmart, Hervé. Feasibility and Economic Impacts of the Energy Transition. In: Sustainability, Vol. 13, no.10 (2021). doi:10.3390/su13105345.
Ribesse, Arnaud ; Ismail, Karim ; Croonenborghs, Maïté ; Irda, Nadia ; Miladi, Lotfi ; Jacques, Pascal ; Mousny, Maryline ; Pardoen, Thomas. Fracture mechanisms in Ti and Co–Cr growing rods and impact on clinical practice. In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 121, p. 104620 (2021). doi:10.1016/j.jmbbm.2021.104620.
Choisez, Laurine ; Elmahdy, A. ; Verleysen, P. ; Jacques, Pascal. Fracture mechanisms in flat and cylindrical tensile specimens of TRIP-TWIP β-metastable Ti-12Mo alloy. In: Acta Materialia, Vol. 220, p. 117294 (2021). doi:10.1016/j.actamat.2021.117294.
Heidarzadeh, A. ; Mironov, S. ; Kaibyshev, R. ; Çam, G. ; Simar, Aude ; Gerlich, A. ; Khodabakhshi, F. ; Mostafaei, A. ; Field, D.P. ; Robson, J.D. ; Deschamps, A. ; Withers, P.J.. Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution. In: Progress in Materials Science, Vol. 117, p. 100752 (2021). doi:10.1016/j.pmatsci.2020.100752.
Van Verdeghem, Joachim ; Dehez, Bruno. Fully Passively Levitated Self-Bearing Machine Implemented within a Reaction Wheel. In: IEEE Transactions on Industry Applications, Vol. 57, no. 6, p. 5782 - 5795 (2021). doi:10.1109/tia.2021.3100015.
Docquier, Nicolas ; Timmermans, Sébastien ; Fisette, Paul. Haptic Devices Based on Real-Time Dynamic Models of Multibody Systems. In: Sensors, (2021). doi:10.3390/s21144794.
Bartosiewicz, Yann. High fidelity simulations in support to assess and improve RANS for modeling turbulent heat transfer in liquid metals: The case of forced convection. In: Nuclear Engineering and Design, Vol. 382 (2021). doi:10.1016/j.nucengdes.2021.111362.
Sapanathan, Thaneshan ; Sabirov, Ilchat ; Xia, Peikang ; Monclus, Miguel ; Molina-Aldareguia, Jon M ; Jacques, Pascal ; Simar, Aude. High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. In: Scripta Materialia, Vol. 200, no. 113910 (2021). doi:10.1016/j.scriptamat.2021.113910.
Tiphéne, Gabrielle ; Baral, Paul ; Comby-Dassonneville, Solène ; Guillonneau, Gaylord ; Kermouche, Guillaume ; Bergheau, Jean-Michel ; Oliver, Warren ; Loubet, Jean-Luc. High-Temperature Scanning Indentation: A new method to investigate in situ metallurgical evolution along temperature ramps. In: Journal of Materials Research, Vol. 36, no. 12, p. 2383-2396 (2021). doi:10.1557/s43578-021-00107-7.
Verleysen, Kevin ; Parente, Alessandro ; Contino, Francesco. How sensitive is a dynamic ammonia synthesis process? Global sensitivity analysis of a dynamic Haber-Bosch process (for flexible seasonal energy storage). In: Energy, Vol. 232, no.121016 (2021).
Tam, Wai Long ; Freitas Mendes, Luís ; Chen, Xike ; Lesage, Raphaëlle ; Van Hoven, Inge ; Leysen, Elke ; Kerckhofs, Greet ; Bosmans, Kathleen ; Chai, Yoke Chin ; Yamashita, Akihiro ; Tsumaki, Noriyuki ; Geris, Liesbet ; Roberts, Scott J. ; Luyten, Frank P.. Human pluripotent stem cell-derived cartilaginous organoids promote scaffold-free healing of critical size long bone defects. In: Stem Cell Research & Therapy, Vol. 12, no.1 (2021). doi:10.1186/s13287-021-02580-7.
Van Verdeghem, Joachim ; Severson, Eric Loren ; Dehez, Bruno. Hybrid Active-Passive Actuation Approach of Passively Levitated Thrust Self-Bearing Machines. In: IEEE Transactions on Industry Applications, Vol. 57, no. 6, p. 7035 - 7045 (2021). doi:10.1109/TIA.2021.3094179.
Molina Fernandez, Cristhian ; Luis Alconero, Patricia. Immobilization of carbonic anhydrase for CO2 capture and its industrial implementation: A review. In: Journal of CO2 Utilization, Vol. 47, p. 101475 (2021). doi:10.1016/j.jcou.2021.101475.
Marin, Carlos ; Tuts, Jolien ; Luyten, Frank P. ; Vandamme, Katleen ; Kerckhofs, Greet. Impaired soft and hard callus formation during fracture healing in diet-induced obese mice as revealed by 3D contrast-enhanced computed tomography imaging. In: Bone, Vol. 150, no.-, p. 116008 (2021). doi:10.1016/j.bone.2021.116008.
Van Loock, Frederik ; Brassart, Laurence ; Pardoen, Thomas. Implementation and calibration of a mesoscale model for amorphous plasticity based on shear transformation dynamics. In: International Journal of Plasticity, Vol. 145, p. 103079 (2021). doi:10.1016/j.ijplas.2021.103079.
Kashiwar, Ankush ; Hahn, Horst ; Kübel, Christian. In Situ TEM Observation of Cooperative Grain Rotations and the Bauschinger Effect in Nanocrystalline Palladium. In: Nanomaterials, Vol. 11, no.2, p. 432 (2021). doi:10.3390/nano11020432.
Khiara, Nargisse ; Onimus, Fabien ; Jublot-Leclerc, Stéphanie ; Jourdan, Thomas ; Pardoen, Thomas ; Raskin, Jean-Pierre ; Bréchet, Yves. In-situ TEM irradiation creep experiment revealing radiation induced dislocation glide in pure copper. In: Acta Materialia, Vol. 216, p. 117096 (2021). doi:10.1016/j.actamat.2021.117096.
Villeneuve, Thierry ; Winckelmans, Grégoire ; Dumas, Guy. Increasing the efficiency of vertical-axis turbines through improved blade support structures. In: Renewable Energy, Vol. 169, p. 1386-1401 (2021). doi:10.1016/j.renene.2021.01.092.
Zuo, X. ; Miotti Bettanini, Alvise ; Hilhorst, Antoine ; Jacques, Pascal ; Moelans, N.. Influence of 5 at.%Al-Additions on the FCC to BCC Phase Transformation in CrFeNi Concentrated Alloys. In: Journal of Phase Equilibria and Diffusion, Vol. 42, p. 794-813 (2021). doi:10.1007/s11669-021-00924-7.
Rattez, Hadrien ; Disidoro, F. ; Sulem, J. ; Veveakis, M.. Influence of dissolution on long-term frictional properties of carbonate fault gouge. In: Geomechanics for Energy and the Environment, Vol. 26, p. 100234 (2021). doi:10.1016/j.gete.2021.100234.
Nikolaeva, Daria ; Verachtert, Katrien ; Azcune, Itxaso ; Jansen, Johannes C. ; Vankelecom, Ivo F.J.. Influence of ionic liquid-like cationic pendants composition in cellulose based polyelectrolytes on membrane-based CO2 separation. In: Carbohydrate Polymers, Vol. 255 (2021). doi:10.1016/j.carbpol.2020.117375.
Lin, Jiuyang ; Chen, Qin ; Huang, Xuan ; Yan, Zhongsen ; Lin, Xiaocheng ; Ye, Wenyuan ; Arcadio, Sotto ; Luis Alconero, Patricia ; Bi, Jinhong ; Van der Bruggen, Bart ; Zhao, Shuaifei. Integrated loose nanofiltration-electrodialysis process for sustainable resource extraction from high-salinity textile wastewater. In: Journal of Hazardous Materials, Vol. 419, p. 126505 (2021). doi:10.1016/j.jhazmat.2021.126505.
Dyakov, Igor V. ; Bergmans, Benjamin ; Idczak, François ; Blondeau, Julien ; Bram, Svend ; Cornette, Jordi ; Coppieters, Thibault ; Contino, Francesco ; Mertens, Jan ; Breulet, Hervé. Intercomparative measurements of particle emission from biomass pellet boiler with portable and stationary dilution devices. In: Aerosol Science and Technology, Vol. 55, no.6, p. 665-680 (2021). doi:10.1080/02786826.2021.1888865.
Avettand-Fènoël, Marie-Noëlle ; Sapanathan, Thaneshan ; Pirling, Thilo ; Racineux, Guillaume ; Simar, Aude ; Drezet, Jean-Marie. Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction. In: Journal of Manufacturing Processes, Vol. 68, p. 1758-1766 (2021). doi:10.1016/j.jmapro.2021.06.071.
Chang, Chihcheng ; Terentyev, Dmitry ; Zinovev, Aleksandr ; Van Renterghem, Wouter ; Yin, Chao ; Verleysen, Patricia ; Pardoen, Thomas ; Vilémová, Monika ; Matějíček, Jiri. Irradiation-induced hardening in fusion relevant tungsten grades with different initial microstructures. In: Physica Scripta, Vol. 96, no.12, p. 124021 (2021). doi:10.1088/1402-4896/ac2181.
Picoli, Michelle C. A. ; Machado, Pedro G.. Land use change: the barrier for sugarcane sustainability. In: Biofuels, Bioproducts and Biorefining, (2021). doi:10.1002/bbb.2270.
Vasquez Mayen, Eduardo Rene ; De Jaeger, Emmanuel. Linearised Bipolar Power Flow for Droop-controlled DC Microgrids. In: 2021 International Conference on Engineering and Emerging Technologies (ICEET), (2021). doi:10.1109/iceet53442.2021.9659746.
Bahloul, Amine ; Doghri, Issam ; Adam, Laurent. Linking a phase field model for polymer crystallization to full-field micromechanical simulations of semi-crystalline polymers. In: Computational Materials Science, Vol. 199, p. 110685 (2021). doi:10.1016/j.commatsci.2021.110685.
Verbeek, Nicolas ; Baudart, François ; Dehez, Bruno. Loop Formulation in Hybrid Analytical Modeling for Solving 2-D Nonlinear Magnetostatic Problems. In: IEEE Transactions on Magnetics, Vol. 57, no.8 (2021). doi:10.1109/tmag.2021.3083418.
Xu, Xiao ; Nikolaeva, Daria ; Hartanto, Yusak ; Luis Alconero, Patricia. MOF-based membranes for pervaporation. In: Separation and Purification Technology, Vol. 278, p. 119233 (2021). doi:10.1016/j.seppur.2021.119233.
de Bournonville, Sébastien ; Geris, Liesbet ; Kerckhofs, Greet. Micro computed tomography with and without contrast enhancement for the characterization of microcarriers in dry and wet state. In: Scientific Reports, Vol. 11, no. 1 (2021). doi:10.1038/s41598-021-81998-8.
Golgoli, M. ; Khiadani, M. ; Shafieian, A. ; Sen, T.K. ; Hartanto, Yusak ; Johns, M.L. ; Zargar, M.. Microplastics fouling and interaction with polymeric membranes: A review. In: Chemosphere, Vol. 283, p. 131185 (2021). doi:10.1016/j.chemosphere.2021.131185.
Yang, Chen ; Verbeek, Nicolas ; Xia, Fangzhou ; Wang, Yi ; Youcef-Toumi, Kamal. Modeling and Control of Piezoelectric Hysteresis: A Polynomial-Based Fractional Order Disturbance Compensation Approach. In: IEEE Transactions on Industrial Electronics, Vol. 68, no. 4, p. 3348-3358 (2021). doi:10.1109/tie.2020.2977567.
Winckelmans, Grégoire ; Duponcheel, Matthieu. Modeling the law of the wake using an offset from the wall. In: Physical Review Fluids, Vol. 6, no.6, p. 064606 (2021). doi:10.1103/PhysRevFluids.6.064606 (Soumis).
Zinovev, Aleksandr ; Delannay, Laurent ; Terentyev, Dmitry. Modelling strain hardening during cyclic thermal shock tests of tungsten. In: Journal of Nuclear Materials, Vol. 546, p. 152776 (2021). doi:10.1016/j.jnucmat.2020.152776.
Minette, Florent ; De Wilde, Juray. Multi-scale modeling and simulation of low-pressure methane bi-reforming using structured catalytic reactors. In: Chemical Engineering Journal, Vol. 407, p. 127218 (2021). doi:10.1016/j.cej.2020.127218.
De Wilde, Juray. NWGD Jaarsymposium. In: Bulk Solid Processing and Handling, Vol. 1 (2021).
Pardoen, Thomas ; Klavzer, Nathan ; Gayot, Sarah ; Van Loock, Frederik ; Chevalier, Jérémy ; Morelle, Xavier ; Destoop, Vincent ; Lani, Frédéric ; Camanho, Pedro ; Brassart, Laurence ; Nysten, Bernard ; Bailly, Christian. Nanomechanics serving polymer-based composite research. In: Comptes Rendus. Physique, Vol. 22, no. S3, p. 1-22 (2021). doi:10.5802/crphys.56.
Lefebvre, Williams ; Rose, Grégory ; Delroisse, Pauline ; Baustert, Eric ; Cuvilly, Fabien ; Simar, Aude. Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy. In: Materials & Design, Vol. 197, p. 109264 (2021). doi:10.1016/j.matdes.2020.109264.
Terentyev, D. ; Yin, C. ; Dubinko, A. ; Chang, C.C. ; You, J.H.. Neutron irradiation hardening across ITER diverter tungsten armor. In: International Journal of Refractory Metals and Hard Materials, Vol. 95, p. 105437 (2021). doi:10.1016/j.ijrmhm.2020.105437.
Ghidelli, Matteo ; Orekhov, Andrey ; Bassi, A. Li ; Terraneo, G. ; Djemia, P. ; Abadias, G. ; Nord, M. ; Béché, A. ; Gauquelin, N. ; Verbeeck, J. ; Raskin, Jean-Pierre ; Schryvers, Dominique ; Pardoen, Thomas ; Idrissi, Hosni. Novel class of nanostructured metallic glass films with superior and tunable mechanical properties. In: Acta Materialia, Vol. 213, p. 116955 (2021). doi:10.1016/j.actamat.2021.116955.
Jamil Ur Rahman, Umair ; Krzysztof Pozarlik, Artur ; Tourneur, Thomas ; de Broqueville, Axel ; De Wilde, Juray ; Brem, Gerrit. Numerical Study toward Optimization of Spray Drying in a Novel Radial Multizone Dryer. In: Energies, Vol. 14, no.5, p. 1233 (2021). doi:10.3390/en14051233.
Constant, Matthieu ; Coppin, Nathan ; Dubois, Frédéric ; Artoni, Riccardo ; Lambrechts, Jonathan ; Legat, Vincent. Numerical investigation of the density sorting of grains using water jigging. In: Powder Technology, Vol. 393, no.1, p. 705-721 (2021). doi:10.1016/j.powtec.2021.07.036.
He, Zirui ; De Wilde, Juray. Numerical simulation of commercial scale autothermal chemical looping reforming and bi-reforming for syngas production. In: Chemical Engineering Journal, Vol. 417, p. 128088 (2021). doi:10.1016/j.cej.2020.128088.
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Hou, Yuliang ; Simar, Aude ; Rachik, Mohamed. On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations. In: Journal of Materials Processing Technology, Vol. 296, no. 117185 (2021). doi:10.1016/j.jmatprotec.2021.117185.
Heins, Sophie ; Tolu, Silvia ; Ronsse, Renaud. Online Learning of the Dynamical Internal Model of Transfemoral Prosthesis for Enhancing Compliance. In: IEEE Robotics and Automation Letters, Vol. 6, no. 4, p. 6156-6163 (2021). doi:10.1109/LRA.2021.3091953.
Jaddi, Sahar ; Raskin, Jean-Pierre ; Pardoen, Thomas. On‑chip environmentally assisted cracking in thin freestanding SiO2 films. In: Journal of Materials Research, Vol. 36, no. 12, p. 2479-2494 (2021). doi:10.1557/s43578-021-00189-3.
Ismail, Karim ; Perlade, Astrid ; Jacques, Pascal ; Pardoen, Thomas. Outstanding cracking resistance of fibrous dual phase steels. In: Acta Materialia, Vol. 207, p. 116700 (2021). doi:10.1016/j.actamat.2021.116700.
Janssens, Raphaël ; Hainaut, Robin ; Gillard, Juline ; Dailly, Hélène ; Luis Alconero, Patricia. Performance of a Slurry Photocatalytic Membrane Reactor for the Treatment of Real Secondary Wastewater Effluent Polluted by Anticancer Drugs. In: Industrial & Engineering Chemistry Research, Vol. 60, p. 2223-2231 (2021). doi:10.1021/acs.iecr.0c04846.
Zinovev, Aleksandr ; Delannay, Laurent ; Terentyev, Dmitry. Plastic deformation of ITER specification tungsten: Temperature and strain rate dependent constitutive law deduced by inverse finite element analysis. In: International Journal of Refractory Metals and Hard Materials, Vol. 96, p. 105481 (2021). doi:10.1016/j.ijrmhm.2021.105481.
Naili, Chiheb ; Doghri, Issam ; Demey, Julien. Porous materials reinforced with short fibers: Unbiased full-field assessment of several homogenization strategies in elasticity. In: Mechanics of Advanced Materials and Structures, , p. 1-16 (2021). doi:10.1080/15376494.2021.1880674.
Minette, Florent ; de Almeida, Luis Calamote ; Ratan, Sanjiv ; De Wilde, Juray. Pressure drop and heat transfer of ZoneFlowTM structured catalytic reactors and reference pellets for Steam Methane Reforming. In: Chemical Engineering Journal, Vol. 417, p. 128080 (2021). doi:10.1016/j.cej.2020.128080.
Alfonso-Cardero, A. ; Pagés-Díaz, J. ; Contino, Francesco ; Rajendran, K. ; Lorenzo-LLanes, J.. Process simulation and techno-economic assessment of vinasse-to-biogas in Cuba: Deterministic and uncertainty analysis. In: Chemical Engineering Research and Design, Vol. 169, no.1, p. 33-45 (2021). doi:10.1016/j.cherd.2021.02.031.
Huang, Chunjie ; Arseenko, Mariia ; Zhao, Lv ; Xie, Yingchun ; Elsenberg, Andreas ; Li, Wenya ; Gärtner, Frank ; Simar, Aude ; Klassen, Thomas. Property prediction and crack growth behavior in cold sprayed Cu deposits. In: Materials & Design, Vol. 206, p. 109826 (2021). doi:10.1016/j.matdes.2021.109826.
Saraiva Rocha da Silva, Fernando ; de Radiguès de Chennevières, Quentin ; Thunis, Grégoire ; Proost, Joris. Pulsed water electrolysis: A review. In: Electrochimica Acta, Vol. 377, p. 138052 (2021). doi:10.1016/j.electacta.2021.138052.
Baral, Paul ; Orekhov, Andrey ; Dohmen, Ralf ; Coulombier, Michaël ; Raskin, Jean-Pierre ; Cordier, Patrick ; Idrissi, Hosni ; Pardoen, Thomas. Rheology of amorphous olivine thin films characterized by nanoindentation. In: Acta Materialia, Vol. 219, p. 117257 (2021). doi:10.1016/j.actamat.2021.117257.
Liu, Riri ; Chen, Qin ; Cao, Moyuan ; Lin, Jiuyang ; Lin, Fang ; Ye, Wenyuan ; Luis Alconero, Patricia ; Van der Bruggen, Bart ; Zhao, Shuaifei. Robust bio-inspired superhydrophilic and underwater superoleophobic membranes for simultaneously fast water and oil recovery. In: Journal of Membrane Science, Vol. 623, p. 119041 (2021). doi:10.1016/j.memsci.2020.119041.
Coppitters, Diederik ; De Paepe, Ward ; Contino, Francesco. Robust design optimization of a photovoltaic-battery-heat pump system with thermal storage under aleatory and epistemic uncertainty. In: Energy, Vol. 229, no.1, p. 120692 (2021). doi:10.1016/j.energy.2021.120692.
Coppitters, Diederik ; De Paepe, Ward ; Contino, Francesco. Robust design optimization of a renewable-powered demand with energy storage using imprecise probabilities. In: E3S Web of Conferences, Vol. 238, p. 10004 (2021). doi:10.1051/e3sconf/202123810004 (Soumis).
Pham, Tu-Hoa ; Seto, William ; Daftry, Shreyansh ; Ridge, Barry ; Hansen, Johanna ; Thrush, Tristan ; Van der Merwe, Mark ; Maggiolino, Gerard ; Brinkman, Alexander ; Mayo, John ; Cheng, Yang ; Padgett, Curtis ; Kulczycki, Eric ; Detry, Renaud. Rover Relocalization for Mars Sample Return by Virtual Template Synthesis and Matching. In: IEEE Robotics and Automation Letters, Vol. 6, no.2, p. 4009-4016 (2021). doi:10.1109/lra.2021.3067281.
Hannard, Florent ; Mirkhalaf, Mohammad ; Ameri, Abtin ; Barthelat, Francois. Segmentations in fins enable large morphing amplitudes combined with high flexural stiffness for fish-inspired robotic materials. In: Science Robotics, Vol. 6, no.57, p. eabf9710 (2021). doi:10.1126/scirobotics.abf9710.
Bahrami, Farzaneh ; Hammad, Mohammed ; Fivel, Marc ; Huet, Benjamin ; D'Haese, Cécile ; Ding, L. ; Nysten, Bernard ; Idrissi, Hosni ; Raskin, Jean-Pierre ; Pardoen, Thomas. Single layer graphene controlled surface and bulk indentation plasticity in copper. In: International Journal of Plasticity, Vol. 138, no.March 2021, p. 102936 (2021). doi:10.1016/j.ijplas.2021.102936.
Ducci, Gianmarco ; Colognesi, Victor ; Vitucci, Gennaro ; Chatelain, Philippe ; Ronsse, Renaud. Stability and Sensitivity Analysis of Bird Flapping Flight. In: Journal of Nonlinear Science, Vol. 31, no.2, p. 47 (2021). doi:10.1007/s00332-021-09698-1.
Jacquey, Antoine B. ; Rattez, Hadrien ; Veveakis, Manolis. Strain localization regularization and patterns formation in rate-dependent plastic materials with multiphysics coupling. In: Journal of the Mechanics and Physics of Solids, Vol. 152, p. 104422 (2021). doi:10.1016/j.jmps.2021.104422.
Samae, Vahid ; Cordier, Patrick ; Demouchy, Sylvie ; Bollinger, Caroline ; Gasc, Julien ; Koizumi, Sanae ; Mussi, Alexandre ; Schryvers, Dominique ; Idrissi, Hosni. Stress-induced amorphization triggers deformation in the lithospheric mantle. In: Nature, Vol. 591, p. 82-86 (2021). doi:10.1038/s41586-021-03238-3.
Rezakazemi, Mashallah ; Arabi Shamsabadi, Ahmad ; Lin, Haiqing ; Luis Alconero, Patricia ; Ramakrishna, Seeram ; Aminabhavi, Tejraj M.. Sustainable MXenes-based membranes for highly energy-efficient separations. In: Renewable and Sustainable Energy Reviews, Vol. 143, p. 110878 (2021). doi:10.1016/j.rser.2021.110878.
Fu, Yang ; Ding, Lipeng ; Singleton, Michael L. ; Idrissi, Hosni ; Hermans, Sophie. Synergistic effects altering reaction pathways: The case of glucose hydrogenation over Fe-Ni catalysts. In: Applied Catalysis B: Environmental, Vol. 288, p. 119997 (2021). doi:10.1016/j.apcatb.2021.119997.
Van Velthem, Pascal ; Gabriel, Sarah ; Pardoen, Thomas ; Bailly, Christian ; Ballout, Wael. Synergy between Phenoxy and CSR Tougheners on the Fracture Toughness of Highly Cross-Linked Epoxy-Based Composites. In: Polymers, Vol. 13, no.15, p. 2477 (2021). doi:10.3390/polym13152477.
Rixhon, Xavier ; Limpens, Gauthier ; Jeanmart, Hervé ; Contino, Francesco. Taxonomy of the fuels in a whole-energy system. In: Frontiers in Energy Research, Vol. 9, no.660073, p. 1-6 (2021). doi:10.3389/fenrg.2021.660073.
Bagherian, Mohammad Ali ; Mehranzamir, Kamyar ; Ahmed, Jubaer ; Nafea, Marwan ; Nabipour‐Afrouzi, Hadi ; Wooi, Chin‐leong ; Beiranvand Pour, Amin ; Rezania, Shahabaldin ; Alizadeh, Seyed Morteza. Techno‐economic analysis of direct combustion and gasification systems for off‐grid energy supply: A case for organic rankine cycle and dual fluidized‐bed. In: IET Renewable Power Generation, Vol. 15, no.12, p. 2596-2614 (2021). doi:10.1049/rpg2.12196.
Choisez, Laurine ; Roy, Geoffrey ; Jacques, Pascal. Temperature rise up to melting under quasi-static loading conditions induced by adiabatic shear banding. In: Materials & Design, Vol. 212, p. 110269 (2021). doi:10.1016/j.matdes.2021.110269.
Rixhon, Xavier ; Limpens, Gauthier ; Coppitters, Diederik ; Jeanmart, Hervé ; Contino, Francesco. The Role of Electrofuels under Uncertainties for the Belgian Energy Transition. In: Energies, Vol. 14, no.4027 (2021). doi:10.3390/en14134027.
Cafiero, Marianna ; Dias, Véronique ; Stagni, Alessandro ; Coussement, Axel ; Jeanmart, Hervé ; Parente, Alessandro. The effect of benzene on the structure of low-pressure premixed H2/CH4/CO-air flames and related NOx formation at different equivalence ratios, collab. Nguyen, Phuc Danh ; Nowakowska,Milena. In: Combustion and Flame, Vol. 232, p. 111510 (2021). doi:10.1016/j.combustflame.2021.111510.
Grosshans, Holger ; Bissinger, Claus ; Calero, Mathieu ; Papalexandris, Miltiadis. The effect of electrostatic charges on particle-laden duct flows. In: Journal of Fluid Mechanics, Vol. 909, no., p. A21 (2021). doi:10.1017/jfm.2020.956.
Wolanski, E. ; Petus, C. ; Lambrechts, Jonathan ; Brodie, J. ; Waterhouse, J. ; Tracey, D.. The intrusion of polluted Fly River mud into Torres Strait. In: Marine Pollution Bulletin, Vol. 166, no.1, p. 112243 (2021). doi:10.1016/j.marpolbul.2021.112243.
Delannay, Francis. The role of grain boundary mobility in diffusional deformation. In: Journal of the Mechanics and Physics of Solids, Vol. 154, p. 104512 (2021). doi:10.1016/j.jmps.2021.104512.
Mahefarisoa, K. L. ; Simon Delso, N. ; Zaninotto, V. ; Colin, M.E. ; Bonmatin, J.M.. The threat of veterinary medicinal products and biocides on pollinators: A One Health perspective. In: One Health, Vol. 12, p. 100237 (2021). doi:10.1016/j.onehlt.2021.100237.
Szyndler, Joanna ; Grosman, Franciszek ; Tkocz, Marek ; Delannay, Laurent ; Wang, Jiangting ; Muszka, Krzysztof ; Madej, Lukasz. Through scale material flow investigation in novel incremental bulk forming process. In: Journal of Materials Processing Technology, Vol. 287, p. 116487 (2021). doi:10.1016/j.jmatprotec.2019.116487.
Lezaack, Matthieu ; Hannard, Florent ; Zhao, Lv ; Orekhov, Andrey ; Adrien, Jérôme ; Miettinen, Arttu ; Idrissi, Hosni ; Simar, Aude. Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments. In: Materialia, Vol. 20, p. 101248 (2021). doi:10.1016/j.mtla.2021.101248.
Lucas, Lisa V. ; Deleersnijder, Eric. Tracers and Timescales: Tools for Distilling and Simplifying Complex Fluid Mechanical Problems. In: Water, Vol. 13, no.19, p. 2796 (2021). doi:10.3390/w13192796.
Lai, Qingquan ; Yang, Huiqin ; Wei, Yuntao ; Zhou, Hao ; Xiao, Lirong ; Ying, Huiqiang ; Lan, Si ; You, Zesheng ; Kou, Zongde ; Feng, Tao ; Lu, Qi ; Jacques, Pascal ; Pardoen, Thomas. Transformation plasticity in high strength, ductile ultrafine-grained FeMn alloy processed by heavy ausforming. In: International Journal of Plasticity, Vol. 148, p. 103151 (2022). doi:10.1016/j.ijplas.2021.103151.
Hay, William Andrew ; Martin, Jimmy ; Migot, Benoît ; Papalexandris, Miltiadis. Turbulent thermal convection driven by free-surface evaporation in cuboidal domains of different aspect ratios. In: Physics of Fluids, Vol. 33, no.1, p. 015104 (2021). doi:10.1063/5.0035277.
Vallaeys, Valentin ; Lambrechts, Jonathan ; Delandmeter, Philippe ; Pätsch, Johannes ; Spitzy, Alejandro ; Hanert, Emmanuel ; Deleersnijder, Eric. Understanding the circulation in the deep, micro-tidal and strongly stratified Congo River estuary. In: Ocean Modelling, Vol. 167, p. 101890 (2021). doi:10.1016/j.ocemod.2021.101890.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Douillard, Thierry ; Li, Zhenhuan ; Simar, Aude. Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions. In: Materials Science and Engineering: A, Vol. 807, p. 140845 (2021). doi:10.1016/j.msea.2021.140845.
Bokas, Georgios ; Chen, Wei ; Hilhorst, Antoine ; Jacques, Pascal ; Gorsse, S. ; Hautier, Geoffroy. Unveiling the thermodynamic driving forces for high entropy alloys formation through big data ab initio analysis. In: Scripta Materialia, Vol. 202, p. 114000 (2021). doi:10.1016/j.scriptamat.2021.114000.
Timmermans, Sébastien ; Ceulemans, Anne-Emmanuelle ; Fisette, Paul. Upright and Grand Piano Actions Dynamic Performances Assessments using a Multibody Approach. In: Mechanism and Machine Theory, (2021). doi:10.1016/j.mechmachtheory.2021.104296.
Liu, Hong ; Lin, Fengxiang ; Liu, Pei ; Yue, Yuan ; Shin, Kwang Seon ; Peng, Liming ; Delannay, Laurent ; Nie, Jian-Feng ; Moelans, Nele. Variant selection of primary–secondary extension twin pairs in magnesium: An analytical calculation study. In: Acta Materialia, Vol. 219, p. 117221 (2021). doi:10.1016/j.actamat.2021.117221.
Vasquez Mayen, Eduardo Rene ; De Jaeger, Emmanuel ; Wanlongo Ndiwulu, Guy ; Lusala, Angelo Kuti. Voltage Unbalance Compensation for Islanded Microgrids with Hybrid Control Approach. In: 2021 International Conference on Engineering and Emerging Technologies (ICEET), (2021). doi:10.1109/iceet53442.2021.9659678.
Ransquin, Ignace ; Caprace, Denis-Gabriel ; Duponcheel, Matthieu ; Chatelain, Philippe. Wake Vortex Detection an d Tracking for Aircraft Formation Flight. In: Journal of Guidance, Control and Dynamics, Vol. 44, no. 12, p. 2225-2243 (2021). doi:10.2514/1.G006028.
Useche, Sergio A. ; Philippot, Pierre ; Ampe, Toon ; Llamazares, Javier ; de Geus, Bas. “Pédaler en toute sécurité”: The Cycling Behavior Questionnaire (CBQ) in Belgium – A validation study. In: Transportation Research Part F: Traffic Psychology and Behaviour, Vol. 80, p. 260-274 (2021). doi:10.1016/j.trf.2021.04.014.
Pochet, Maxime ; Jeanmart, Hervé ; Contino, Francesco. A 22:1 Compression Ratio Ammonia-Hydrogen HCCI Engine: Combustion, Load, and Emission Performances. In: Frontiers of Engineering Mechanics Research, Vol. 6, no. 43, p. 1-16 (2020). doi:10.3389/fmech.2020.00043.
Meurice, Robin ; Soares Frazao, Sandra. A 2D HLL-based weakly coupled model for transient flows on mobile beds. In: Journal of Hydroinformatics, Vol. 22, no.5, p. 1351-1369 (2020). doi:10.2166/hydro.2020.033.
Shams, A. ; Roelofs, F. ; Tiselj, I. ; Oder, J. ; Bartosiewicz, Yann ; Duponcheel, Matthieu ; Niceno, B. ; Guo, W. ; Stalio, E. ; Angeli, D. ; Buckingham, Sophia ; Koloszar, L.K. ; Ortiz, A.V. ; Planquart, P. ; Narayannan, C. ; van Tichelen, K. ; Jager, W. ; Schaub, T.. A collaborative effort towards the accurate prediction of turbulent flow and heat transfer in low-Prandtl number fluids. In: Nuclear Engineering and Design, Vol. 366, p. 110570 (2020). doi:10.1016/j.nucengdes.2020.110750.
Fan, Ningsong ; Cizek, Jan ; Huang, Chunjie ; Xie, Xinliang ; Chlup, Zdenek ; Jenkins, Richard ; Lupoi, Rocco ; Yin, Shuo. A new strategy for strengthening additively manufactured cold spray deposits through in-process densification. In: Additive Manufacturing, Vol. 36, p. 101626 (2020). doi:10.1016/j.addma.2020.101626.
Tong, Xin ; Xu, Jinsheng ; Doghri, Issam ; El Ghezal, Marieme Imene ; Krairi, Anouar ; Chen, Xiong. A nonlinear viscoelastic constitutive model for cyclically loaded solid composite propellant. In: International Journal of Solids and Structures, Vol. 198, p. 126-135 (2020). doi:10.1016/j.ijsolstr.2020.04.011.
Nguyen, Van-Dung ; Pardoen, Thomas ; Noels, Ludovic. A nonlocal approach of ductile failure incorporating void growth, internal necking, and shear dominated coalescence mechanisms. In: Journal of the Mechanics and Physics of Solids, Vol. 137, p. 103891 (2020). doi:10.1016/j.jmps.2020.103891.
Khiara, Nargisse ; Onimus, Fabien ; Dupuy, Laurent ; Kassem, Wassim ; Crocombette, Jean-Paul ; Pardoen, Thomas ; Raskin, Jean-Pierre ; Bréchet, Yves. A novel displacement cascade driven irradiation creep mechanism in α-zirconium: A molecular dynamics study. In: Journal of Nuclear Materials, Vol. 541, p. 152336 (2020). doi:10.1016/j.jnucmat.2020.152336.
Al-Dabbagh, Ali Hussein ; Ronsse, Renaud. A review of terrain detection systems for applications in locomotion assistance. In: Robotics and Autonomous Systems, Vol. 133, p. 103628 (2020). doi:10.1016/j.robot.2020.103628.
Dewals, Benjamin ; Archambeau, Pierre ; Bruwier, Martin ; Erpicum, Sebastien ; Pirotton, Michel ; Adam, Tom ; Delhez, Eric ; Deleersnijder, Eric. Age of Water Particles as a Diagnosis of Steady-State Flows in Shallow Rectangular Reservoirs. In: Water, Vol. 12, no.10, p. 2819 (2020). doi:10.3390/w12102819.
Colsoul, Nicolas ; Marin, Carlos ; Corbeels, Katrien ; Kerckhofs, Greet ; Van der Schueren, Bart ; Vandamme, Katleen. Alteration of the Condylar Oral Bone in Obese and Gastric Bypass Mice. In: Calcified Tissue International, Vol. 107, no.4, p. 371-380 (2020). doi:10.1007/s00223-020-00732-0.
Li, J. S. ; Raoelison, R. N. ; Sapanathan, Thaneshan ; Zhang, Z. ; Chen, X. G. ; Marceau, D. ; Hou, Y. L. ; Rachik, M.. An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. In: Applied Physics Letters, Vol. 116, no.16, p. 161601 (2020). doi:10.1063/5.0005299.
Bahloul, Amine ; Doghri, Issam ; Adam, Laurent. An enhanced phase field model for the numerical simulation of polymer crystallization. In: Polymer Crystallization, Vol. 3, no.4 (2020). doi:10.1002/pcr2.10144 (Soumis).
Caprace, Denis-Gabriel ; Winckelmans, Grégoire ; Chatelain, Philippe. An immersed lifting and dragging line model for the Vortex Particle-Mesh method. In: Theoretical and Computational Fluid Dynamics, Vol. 34, no.1, p. 21-48 (2020). doi:10.1007/s00162-019-00510-1.
Le, Hoang-Anh ; Lambrechts, Jonathan ; Ortleb, Sigrun ; Gratiot, Nicolas ; Deleersnijder, Eric ; Soares Frazao, Sandra. An implicit wetting–drying algorithm for the discontinuous Galerkin method: application to the Tonle Sap, Mekong River Basin. In: Environmental Fluid Mechanics, (2020). doi:10.1007/s10652-019-09732-7.
Lumbeeck, Gunnar ; Delvaux, Adeline ; Idrissi, Hosni ; Proost, Joris ; Schryvers, Dominique. Analysis of internal stress build-up during deposition of nanocrystalline Ni thin films using transmission electron microscopy. In: Thin Solid Films, Vol. 707, p. 138076 (2020). doi:10.1016/j.tsf.2020.138076.
Li, Yi ; Li, Jian ; Soria, Raul Bahamonde ; Volodine, Alexander ; Van der Bruggen, Bart. Aramid nanofiber and modified ZIF-8 constructed porous nanocomposite membrane for organic solvent nanofiltration. In: Journal of Membrane Science, Vol. 603, p. 118002 (2020). doi:10.1016/j.memsci.2020.118002.
Sula, Constantin ; Grosshans, Holger ; Papalexandris, Miltiadis. Assessment of Droplet Breakup Models for Spray Flow Simulations. In: Flow, Turbulence and Combustion, Vol. 105, no.3, p. 889-914 (2020). doi:10.1007/s10494-020-00139-9.
Terentyev, D. ; Vilémová, Monika ; Yin, Chao ; Veverka, Jakub ; Dubinko, Andrii ; Matějíček, Jiří. Assessment of mechanical properties of SPS-produced tungsten including effect of neutron irradiation. In: International Journal of Refractory Metals and Hard Materials, Vol. 89, p. 105207 (2020). doi:10.1016/j.ijrmhm.2020.105207.
Beaufort, Pierre-Alexandre ; Geuzaine, Christophe ; Remacle, Jean-François. Automatic surface mesh generation for discrete models : a complete and automatic pipeline based on reparametrization. In: Journal of Computational Physics, Vol. 417, no.109575 (2020). doi:10.1016/j.jcp.2020.109575.
Varsakelis, Christos ; Papalexandris, Miltiadis. Bridging the gap between the Darcy- Brinkman equations and the Nielsen model for tortuosity in polymer-filled systems. In: Chemical Engineering Science, Vol. 213, p. #115394 (2020).
Van Achter, Guillian ; Ponsoni, Leandro ; Massonnet, François ; Fichefet, Thierry ; Legat, Vincent. Brief communication: Arctic sea ice thickness internal variability and its changes under historical and anthropogenic forcing. In: The Cryosphere, Vol. 14, no.10, p. 3479-3486 (2020). doi:10.5194/tc-14-3479-2020.
Prihatiningtyas, Indah ; Hartanto, Yusak ; Ballesteros, Maria Sandra Reyes ; Van der Bruggen, Bart. Cellulose triacetate/LUDOX‐SiO2 nanocomposite for synthesis of pervaporation desalination membranes. In: Journal of Applied Polymer Science, Vol. online, p. 50000 (2020). doi:10.1002/app.50000.
Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin ; Brunner, Roland ; Wenk, Thomas. Characterization of mortar–timber and timber–timber cyclic friction in timber floor connections of masonry buildings. In: Materials and Structures, Vol. 53, no.51, p. 1-14 (2020). doi:10.5281/zenodo.3348328.
Žiga Rosec ; Dias, Véronique ; Contino, Francesco ; Tomaž Katrašnik ; Tine Seljak. Comparative analysis of bio-intermediates and waste-derived fuels in experimental gas turbine. In: Frontiers of Engineering Mechanics Research, Vol. 6, p. 71 (2020). doi:10.3389/fmech.2020.00071.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Dolimont, Adrien ; Simar, Aude ; Rivière-Lorphèvre, Edouard. Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. In: Additive Manufacturing, Vol. 36, p. 101499 (2020). doi:10.1016/j.addma.2020.101499.
Deleersnijder, Eric ; Draoui, Insaf ; Lambrechts, Jonathan ; Legat, Vincent ; Mouchet Anne. Consistent boundary conditions for age calculations. In: Water, Vol. 12, p. 1274 (2020). doi:10.3390/w12051274.
Rahimi Nohooji, Hamed. Constrained Neural Adaptive PID Control for Robot Manipulators. In: Journal of the Franklin Institute, (2020). doi:10.1016/j.jfranklin.2019.12.042.
Gérardy, Romaric ; Debecker, Damien P. ; Estager, Julien ; Luis Alconero, Patricia ; Monbaliu, Jean-Christophe. Continuous Flow Upgrading of Selected C2−C6 Platform Chemicals Derived from Biomass. In: Chemical Reviews, Vol. 120, p. 7219–7347 (2020).
Zhukova, Maria ; Kotipalli, Ratan ; PONCELET, Olivier ; Samain, Louise ; Fourdrinier, Lionel ; Flandre, Denis. Correlation and optimization of the optoelectrical properties of DC magnetron-sputtered Cu2ZnSnS4 absorber layer as a function of the material composition. In: Materials Science in Semiconductor Processing, Vol. 121, no.105307, p. 1-11 (2021). doi:10.1016/j.mssp.2020.105367.
Tamer, Saadallah ; Mastrobuoni, Stefano ; Van Dyck, Michel ; Navarra, Emiliano ; Bollen, Xavier ; Poncelet, Alain ; Noirhomme, Philippe ; Astarci, Parla ; El Khoury, Gébrine ; de Kerchove, Laurent. Corrigendum to 'Free margin length and geometric height in aortic root dilatation and leaflet prolapse: implications for aortic valve repair surgery'.. In: European journal of cardio-thoracic surgery, Vol. 57, no. 1, p. 206 (2020). doi:10.1093/ejcts/ezz183.
Hou, Yuliang ; Tie, Ying ; Li, Cheng ; Sapanathan, Thaneshan ; Rachik, Mohamed. Corrigendum to ‘Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations’[Composites Part B: Engineering 163(2019):669–680]. In: Composites Part B: Engineering, Vol. 197, p. 108202 (2020). doi:10.1016/j.compositesb.2020.108202.
Proost, Joris. Critical assessment of the production scale required for fossil parity of green electrolytic hydrogen. In: International Journal of Hydrogen Energy, Vol. 45, no. 35, p. 17067-17075 (2020). doi:10.1016/j.ijhydene.2020.04.259.
Winiarski, Bartlomiej ; Pyka, Grzegorz ; Chirazi, Ali ; Lichau, Daniel. Cross-platform Holder Kit for a Real 3D Correlative Tomography and Microscopy. In: Microscopy and Microanalysis, Vol. 26, no.S2, p. 556-558 (2020). doi:10.1017/s143192762001507x.
Lorenzo-Llanes, Junior ; Pagés-Díaz, Jhosané ; Kalogirou, Efstratios ; Contino, Francesco. Development and application in aspen plus of a process simulation model for the anaerobic digestion of vinasses in UASB reactors: Hydrodynamics and biochemical reactions. In: Journal of Environmental Chemical Engineering, Vol. 8, no.2, p. 103540 (2020). doi:10.1016/j.jece.2019.103540.
Angielczyk, W. ; Bartosiewicz, Yann ; Butrymowicz, D.. Development of delayed equilibrium model for CO2 convergent-divergent nozzle transonic flashing flow. In: International Journal of Multiphase Flow, Vol. 131, no. 103351 (2020). doi:10.1016/j.ijmultiphaseflow.2020.103351.
Samaee, Vahid ; Sandfeld, Stefan ; Idrissi, Hosni ; Groten, Jonas ; Pardoen, Thomas ; Schwaiger, Ruth ; Schryvers, Dominique. Dislocation structures and the role of grain boundaries in cyclically deformed Ni micropillars. In: Materials Science and Engineering: A, Vol. 769, p. 138295 (2020). doi:10.1016/j.msea.2019.138295.
Yin, Chao ; Terentyev, Dmitry ; Zhang, Tao ; Nogami, Shuhei ; Antusch, Steffen ; Chang, Chih-Cheng ; Petrov, Roumen H. ; Pardoen, Thomas. Ductile to brittle transition temperature of advanced tungsten alloys for nuclear fusion applications deduced by miniaturized three-point bending tests. In: International Journal of Refractory Metals and Hard Materials, Vol. 95, p. 105464 (2021). doi:10.1016/j.ijrmhm.2020.105464.
Yu, Ke ; Colonius, Tim ; Pullin, D.I. ; Winckelmans, Grégoire. Dynamics and decay of a spherical region of turbulence in free space. In: Journal of Fluid Mechanics, Vol. 907, no.A19 (2021). doi:10.1017/jfm.2020.818 (Accepté/Sous presse).
Sparenberg, Marie-Charlotte ; Ruiz Salmón, Israel ; Luis Alconero, Patricia. Economic evaluation of salt recovery from wastewater via membrane distillation-crystallization. In: Separation and Purification Technology, Vol. 235, p. 116075 (2020). doi:10.1016/j.seppur.2019.116075.
Tine Seljak ; Guillaume Vanhove ; Christine Mounaïm-Rousselle ; Dias, Véronique ; Contino, Francesco. Editorial: Fundamental Characterization and Performance of Alternative Fuels. In: Frontiers in Mechanical Engineering, Vol. 6, no.Article 609504, p. 1-2 (2020). doi:10.3389/fmech.2020.609504.
Bahamonde Soria, Raul Alfonso ; Zhu, Junyong ; Gonza, Irma ; Van der Bruggen, Bart ; Luis Alconero, Patricia. Effect of (TiO2: ZnO) ratio on the anti-fouling properties of bio-inspired nanofiltration membranes. In: Separation and Purification Technology, Vol. 251, p. 117280 (2020). doi:10.1016/j.seppur.2020.117280.
Naceri, Salah. E. ; Izerrouken, M. ; Sari, A. ; Ryelandt, S. ; Menchi, O. ; Ghamnia, M.. Effect of 165-keV Ar-ion irradiation on microstructural and mechanical properties of zircaloy-4. In: Journal of Radioanalytical and Nuclear Chemistry, Vol. 323, no. 2, p. 817-824 (2020). doi:10.1007/s10967-019-07007-5.
Nguyen, Anh Phong ; Herman, Benoît ; Mahaudens, Philippe ; Everard, Gauthier ; Libert, Thibaut ; Detrembleur, Christine. Effect of age and body size on the wrist’s viscoelasticity in healthy participants from 3 to 90-years-old and reliability assessment.. In: Frontiers, (2020). doi:10.3389/fspor.2020.00023 (Accepté/Sous presse).
Yin, Chao ; Terentyev, D ; Van Dyck, S ; Stankovskiy, A ; Petrov, R.H. ; Pardoen, Thomas. Effect of high temperature neutron irradiation on fracture toughness of ITER-specification tungsten. In: Physica Scripta : an international journal for experimental and theoretical physics, Vol. T171, p. 014052 (2020).
Delvaux, Adeline ; Lumbeeck, Gunnar ; Idrissi, Hosni ; Proost, Joris. Effect of microstructure and internal stress on hydrogen absorption into Ni thin film electrodes during alkaline water electrolysis. In: Electrochimica Acta, Vol. 340, p. 135970 (2020). doi:10.1016/j.electacta.2020.135970.
Cassiers, Séverine ; Boveroux, François ; Martin, Christophe ; Maes, Rafael ; Martens, Kris ; Bergmans, Benjamin ; Idczak, François ; Jeanmart, Hervé ; Contino, Francesco. Emission Measurement of Buses Fueled with Biodiesel Blends during On-Road Testing. In: Energies 2020, Vol. 13, Page 5267, Vol. 13, no.20, p. 5267-5267 (2020). doi:10.3390/EN13205267.
Scarcello, Eleonora ; Lobysheva, Irina ; Bouzin, Caroline ; Jacques, Pascal ; Lison, Dominique ; Dessy, Chantal. Endothelial dysfunction induced by hydroxyl radicals – the hidden face of biodegradable Fe-based materials for coronary stents. In: Materials science & engineering. C, Materials for biological applications, Vol. 112, p. 110938 [1-11] (2020). doi:10.1016/j.msec.2020.110938.
Dias, Véronique ; Pochet, Maxime ; Contino, Francesco ; Jeanmart, Hervé. Energy and economic costs of chemical storage. In: Frontiers of Engineering Mechanics Research, Vol. 6:21 (2020) (2020). doi:10.3389/fmech.2020.00021.
Kamperman, Tom ; Teixeira, Liliana Moreira ; Salehi, Seyedeh Sarah ; Kerckhofs, Greet ; Guyot, Yann ; Geven, Mike ; Geris, Liesbet ; Grijpma, Dirk ; Blanquer, Sebastien ; Leijten, Jeroen. Engineering 3D parallelized microfluidic droplet generators with equal flow profiles by computational fluid dynamics and stereolithographic printing. In: Lab on a Chip, Vol. 20, no. 3, p. 490-495 (2020). doi:10.1039/c9lc00980a.
Jin, Pengrui ; Zhu, Junyong ; Yuan, Shushan ; Zhang, Gang ; Volodine, Alexander ; Tian, Miaomiao ; Wang, Jianxiu ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Erythritol-based polyester loose nanofiltration membrane with fast water transport for efficient dye/salt separation. In: Chemical Engineering Journal, Vol. 406, p. 126796 (2021). doi:10.1016/j.cej.2020.126796.
Hay, William Andrew ; Papalexandris, Miltiadis. Evaporation-driven turbulent convection in water pools. In: Journal of Fluid Mechanics, Vol. 904, no., p. A14 (2020). doi:10.1017/jfm.2020.670.
Caprace, Denis-Gabriel ; Gontier, Camille ; Iranmanesh, Mohammad ; Scoubeau, Mehdi ; Pletser, Vladimir. Experimental Characterization of Weightlessness During Glider Parabolic Flights. In: Microgravity Science and Technology, Vol. 32, no.1, p. 1121–1132 (2020). doi:10.1007/s12217-020-09836-6.
Lhuillier, Charles ; Brequigny, Pierre ; Lamoureux, Nathalie ; Contino, Francesco ; Mounaïm-Rousselle, Christine. Experimental investigation on laminar burning velocities of ammonia/hydrogen/air mixtures at elevated temperatures. In: Fuel, Vol. 263, p. 116653 (2020). doi:10.1016/j.fuel.2019.116653.
Harouna, Ibrahim G. ; Berger, Benjamin ; Jeanmart, Hervé ; Sanogo, Oumar ; Daho, Tizane ; Ouiminga, Salifou K. ; Koulidiati, Jean. Experimental study of the co-gasification of wood and polyethylene in a two-stage gasifier. In: Energy Science & Engineering, no. 00, p. 1-13 (2020). doi:10.1002/ese3.667.
Lhuillier, Charles ; Brequigny, Pierre ; Contino, Francesco ; Mounaïm-Rousselle, Christine. Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions. In: Fuel, Vol. 269, no., p. 117448 (2020). doi:10.1016/j.fuel.2020.117448.
Ashford, Martin Christopher ; Popescu, L. ; Houngbo, D. ; Dierckx, M. ; Aït Abderrahim, Hamid. Exploratory study for the production of Sc beams at the ISOL facility of MYRRHA preliminary thermal investigations. In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 463, p. 244-247 (2020). doi:10.1016/j.nimb.2019.05.028.
de Bournonville, Sébastien ; Vangrunderbeeck, Sarah ; Ly, Hong Giang T. ; Geeroms, Carla ; De Borggraeve, Wim M. ; Parac-Vogt, Tatjana N. ; Kerckhofs, Greet. Exploring polyoxometalates as non-destructive staining agents for contrast-enhanced microfocus computed tomography of biological tissues. In: Acta Biomaterialia, Vol. 105, p. 253-262 (2020). doi:10.1016/j.actbio.2020.01.038.
Tarquini, Danilo ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Extended Tension Chord Model for Boundary Elements of RC Walls Accounting for Anchorage Slip and Lap Splices Presence. In: International Journal of Concrete Structures and Materials, Vol. 14, no. 2 (2020) (2020). doi:10.1186/s40069-019-0381-9.
Simar, Aude ; Hannard, Florent ; Lezaack, Matthieu Baudouin ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Pyka, Grzegorz. Extended durability for high strength aluminium alloys. In: The Innovation Patform, Vol. on line (2020).
Frys, Charles ; Saint-Amand, Antoine ; Le Hénaff, Matthieu ; Figueiredo, Joana ; Kuba, Alyson ; Walker, Brian ; Lambrechts, Jonathan ; Vallaeys, Valentin ; Vincent, David ; Hanert, Emmanuel. Fine-Scale Coral Connectivity Pathways in the Florida Reef Tract: Implications for Conservation and Restoration. In: Frontiers in Marine Science, Vol. 7, p. 1-16 (2020). doi:10.3389/fmars.2020.00312.
Velasco, Jonathan ; Henrotte, François ; Geuzaine, Christophe. Finite-Element Modeling of Thin Conductors in Frequency Domain. In: IEEE Transactions on Magnetics, Vol. 56, no.4, p. 1-4 (2020). doi:10.1109/tmag.2019.2955514.
Tamer, Saadallah ; Mastrobuoni, Stefano ; Van Dyck, Michel ; Navarra, Emiliano ; Bollen, Xavier ; Poncelet, Alain ; Noirhomme, Philippe ; Astarci, Parla ; El Khoury, Gebrine ; de Kerchove, Laurent. Free margin length and geometric height in aortic root dilatation and leaflet prolapse: implications for aortic valve repair surgery. In: European journal of cardio-thoracic surgery, Vol. 57, p. 124-132 (2020). doi:10.1093/ejcts/ezz183.
Dupont, Elise ; Koppelaar, Rembrandt ; Jeanmart, Hervé. Global available solar energy under physical and energy return on investment constraints. In: Applied Energy, Vol. 257 (2020). doi:10.1016/j.apenergy.2019.113968 (Accepté/Sous presse).
Choisez, Laurine ; Ding, Lipeng ; Marteleur, Matthieu ; Idrissi, Hosni ; Pardoen, Thomas ; Jacques, Pascal. High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy. In: Nature Communications, Vol. 11, no.1, p. 2110 (2020). doi:10.1038/s41467-020-15772-1.
Verleysen, Kevin ; Coppitters, Diederik ; Parente, Alessandro ; De Paepe, Ward ; Contino, Francesco. How can power-to-ammonia be robust? Optimization of an ammonia synthesis plant powered by a wind turbine considering operational uncertainties. In: Fuel, Vol. 266, no.1, p. 117049 (2020). doi:10.1016/j.fuel.2020.117049.
Scarcello, Eleonora ; Herpain, Anita ; Tomatis, Maura ; Turci, Franscico ; Jacques, Pascal ; Lison, Dominique. Hydroxyl radicals and oxidative stress: the dark side of Fe corrosion. In: Colloids and surfaces. B, Biointerfaces, Vol. 185, p. 110542 [1-9] (2020). doi:10.1016/j.colsurfb.2019.110542.
Boveroux, François ; Cassiers, Séverine ; De Meyer, Philippe ; Buekenhoudt, Pascal ; Bergmans, Benjamin ; Idczak, François ; Jeanmart, Hervé ; Verhelst, Sebastian ; Contino, Francesco. Impact of Mileage on Particle Number Emission Factors for EURO5 and EURO6 Diesel Passenger Cars. In: Atmospheric Environment, , p. 117975 (2020). doi:10.1016/j.atmosenv.2020.117975 (Accepté/Sous presse).
Yin, Chao ; Terentyev, Dmitry ; Zhang, Tao ; Petrov, Roumen H. ; Pardoen, Thomas. Impact of neutron irradiation on the strength and ductility of pure and ZrC reinforced tungsten grades. In: Journal of Nuclear Materials, Vol. 537, p. 152226 (2020). doi:10.1016/j.jnucmat.2020.152226.
Idrissi, Hosni ; Samaee, Vahid ; Lumbeeck, Gunnar ; van der Werf, Thomas ; Pardoen, Thomas ; Schryvers, Dominique ; Cordier, Patrick. In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope. In: Journal of Geophysical Research: Solid Earth, Vol. 125, no.3, p. e2019JB018383 (2020). doi:10.1029/2019jb018383.
Santos Macias, Juan Guillermo ; Douillard, Thierry ; Zhao, Lv ; Maire, Eric ; Pyka, Grzegorz ; Simar, Aude. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg. In: Acta Materialia, Vol. 201, p. 231-243 (2020). doi:10.1016/j.actamat.2020.10.001.
Champagne, Aurélie ; Ricci, Francesco ; Barbier, M. ; Ouisse, T. ; Magnin, Delphine ; Ryelandt, Sophie ; Pardoen, Thomas ; Hautier, Geoffroy ; Barsoum, M. W. ; Charlier, Jean-Christophe. Insights into the elastic properties of RE-i-MAX phases and their potential exfoliation into two-dimensional RE-i-MXenes. In: Physical Review Materials, Vol. 4, no. 1, p. 013604 (2020). doi:10.1103/physrevmaterials.4.013604.
Li, J.S. ; Raoelison, R.N. ; Sapanathan, Thaneshan ; Hou, Y.L. ; Rachik, M.. Interface evolution during magnetic pulse welding under extremely high strain rate collision: mechanisms, thermomechanical kinetics and consequences. In: Acta Materialia, Vol. 195, p. 404-415 (2020). doi:10.1016/j.actamat.2020.05.028.
Simar, Aude. Lightening the load of aluminium alloys. In: EU Researcher, Vol. Summer 2020, p. 59 (2020).
Barros Dias, Bruno ; Scoggins, J. B. ; Magin, T. E.. Luminosity calculation of meteor entry based on detailed flow simulations in the continuum regime. In: Astronomy & Astrophysics, Vol. 635, no.A184 (2020). doi:10.1051/0004-6361/202037498.
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Soete, Jeroen ; Pyka, Grzegorz ; Simar, Aude. Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach. In: Journal of Materials Processing Technology, Vol. 283, p. 116722 (2020). doi:10.1016/j.jmatprotec.2020.116722.
Lin, Fengxiang ; Shi, Qiwei ; Delannay, Laurent. Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals. In: International Journal of Solids and Structures, Vol. 184, p. 167-177 (2020). doi:10.1016/j.ijsolstr.2019.01.024.
Scarcello, Eleonora ; Lambremont, Alexia ; Vanbever, Rita ; Jacques, Pascal ; Lison, Dominique. Mind your assays: Misleading cytotoxicity with the WST-1 assay in the presence of manganese. In: PloS one, Vol. 15, no. 4, p. e0231634 [1-14] (2020). doi:10.1371/journal.pone.0231634.
Docquier, Nicolas ; Lantsoght, Olivier ; Dubois, Frédéric ; Brüls, Olivier. Modelling and simulation of coupled multibody systems and granular media using the non-smooth contact dynamics approach. In: Multibody System Dynamics, Vol. 49, p. 181–202 (2020). doi:10.1007/s11044-019-09721-0.
Beckers, Jarl ; Coppitters, Diederik ; Paepe, Ward De ; Contino, Francesco ; Mierlo, Joeri Van ; Verrelst, Björn. Multi-Fidelity Design Optimisation of a Solenoid-Driven Linear Compressor. In: Actuators, Vol. 9, no.2, p. 38 (2020). doi:10.3390/act9020038.
Timmermans, Sébastien ; Dehez, Bruno ; Fisette, Paul. Multibody-Based Piano Action : Validation of a Haptic Key. In: Machines, (2020). doi:10.3390/machines8040076.
Pham Van, Chien ; de Brye, Benjamin ; de Brauwere, Anouk ; Hoitink, A.J.F. (Ton) ; Soares Frazao, Sandra ; Deleersnijder, Eric. Numerical Simulation of Water Renewal Timescales in the Mahakam Delta, Indonesia. In: Water, Vol. 12, no.4, p. 1017 (2020). doi:10.3390/w12041017.
Seguí, C. ; Rattez, Hadrien ; Veveakis, M.. On the Stability of Deep-Seated Landslides. The Cases of Vaiont (Italy) and Shuping (Three Gorges Dam, China). In: Journal of Geophysical Research: Earth Surface, Vol. 125, no. 7, p. 1-24 (2020). doi:10.1029/2019JF005203.
Papalexandris, Miltiadis. On the applicability of Stokes’ hypothesis to low-Mach-number flows. In: Continuum Mechanics and Thermodynamics, Vol. 32, no. 4, p. 1245-1249 (2020). doi:10.1007/s00161-019-00785-z.
van der Rest, Camille ; Dupont, Vedi ; Erauw, Jean-Pierre ; Jacques, Pascal. On the reactive sintering of Heusler Fe2VAl-based thermoelectric compounds. In: Intermetallics, Vol. 125, p. 106890 (2020). doi:10.1016/j.intermet.2020.106890.
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. On the sensitivity of fracture mechanism to stress concentration configuration in a two-step quenching and partitioning steel. In: International Journal of Fracture, Vol. 224, no. 1, p. 101-116 (2020). doi:10.1007/s10704-020-00448-0.
Tie, Ying ; Hou, Yuliang ; Li, Cheng ; Meng, Liang ; Sapanathan, Thaneshan ; Rachik, Mohamed. Optimization for maximizing the impact-resistance of patch repaired CFRP laminates using a surrogate-based model. In: International Journal of Mechanical Sciences, Vol. 172, no. 105407 (2020). doi:10.1016/j.ijmecsci.2019.105407.
Tuyaerts, Romain ; Raskin, Jean-Pierre ; Proost, Joris. Opto-electrical properties and internal stress in Al:ZnO thin films deposited by direct current reactive sputtering. In: Thin Solid Films, Vol. 695, no.137760, p. 8 pages (2020). doi:10.1016/j.tsf.2019.137760.
Gharsallaoui, Haythem ; Jafari, Mustafa ; Holeyman, Alain. Pile end bearing capacity in rock mass using cavity expansion theory. In: Journal of Rock Mechanics and Geotechnical Engineering, (2020). doi:10.1016/j.jrmge.2020.03.004.
Jin, Pengrui ; Yuan, Shushan ; Zhang, Gang ; Zhu, Junyong ; Zheng, Junfeng ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Polyarylene thioether sulfone/sulfonated sulfone nanofiltration membrane with enhancement of rejection and permeability via molecular design☆. In: Journal of Membrane Science, Vol. 608, p. 118241 (2020). doi:10.1016/j.memsci.2020.118241.
Cristóvão, M.B. ; Janssens, Raphaël ; Yadav, A. ; Pandey, S. ; Luis Alconero, Patricia ; Van der Bruggen, B. ; Dubey, K.K. ; Mandal, M.K. ; Crespo, J.G. ; Pereira, V.J.. Predicted concentrations of anticancer drugs in the aquatic environment: What should we monitor and where should we treat?. In: Journal of Hazardous Materials, Vol. 392, p. 122330 (2020). doi:10.1016/j.jhazmat.2020.122330.
Gayot, Sarah ; Bailly, Christian ; Pardoen, Thomas ; Gérard, Pierre ; Van Loock, Frederik. Processing maps based on polymerization modelling of thick methacrylic laminates. In: Materials & Design, Vol. 196, p. 109170 (2020). doi:10.1016/j.matdes.2020.109170.
Kapepula Lumami, Vercus ; Ndikumana, Théophile ; Dieu-Donné, Musibono ; Luis Alconero, Patricia ; Buleng Tamungang, Njoyim Estella ; Tarimo, Irène ; Van der Bruggen, Bart. Qualitative and quantitative analysis of the pollutant load of effluents discharged Northwestern of Lake Tanganyika, in the Democratic Republic of Congo. In: African Journal of Environmental Science and Technology, Vol. 14, no.11, p. 361-373 (2020).
Hinnekens, Simon ; Mahaudens, Philippe ; Detrembleur, Christine ; Fisette, Paul. Quantification of abdominal and back muscles forces: calibration for the Sorensen test. In: Computer Methods in Biomechanics and Biomedical Engineering, Vol. 23, no.S1, p. 142-144 (2020). doi:10.1080/10255842.2020.1812851.
De Paepe, Ward ; Pappa, Alessio ; Coppitters, Diederik ; Montero Carrero, Marina ; Tsirikoglou, Panagiotis ; Contino, Francesco. Recuperator Performance Assessment in Humidified Micro Gas Turbine Applications Using Experimental Data Extended With Preliminary Support Vector Regression Model Analysis. In: Journal of Engineering for Gas Turbines and Power, Vol. 143, no. 7 (2021) (2021). doi:10.1115/1.4049266.
Ward De Paepe ; Alessio Pappa ; Marina Montero Carrero ; Laurent Bricteux ; Contino, Francesco. Reducing waste heat to the minimum: Thermodynamic assessment of the M-power cycle concept applied to micro Gas Turbines. In: Applied Energy, Vol. 279, no., p. 115898 (2020). doi:10.1016/j.apenergy.2020.115898.
Tratwal, Josefine ; Labella, Rossella ; Bravenboer, Nathalie ; Kerckhofs, Greet ; Douni, Eleni ; Scheller, Erica L. ; Badr, Sammy ; Karampinos, Dimitrios C. ; Beck-Cormier, Sarah ; Palmisano, Biagio ; Poloni, Antonella ; Moreno-Aliaga, Maria J. ; Fretz, Jackie ; Rodeheffer, Matthew S. ; Boroumand, Parastoo ; Rosen, Clifford J. ; Horowitz, Mark C. ; van der Eerden, Bram C. J. ; Veldhuis-Vlug, Annegreet G. ; Naveiras, Olaia. Reporting Guidelines, Review of Methodological Standards, and Challenges Toward Harmonization in Bone Marrow Adiposity Research. Report of the Methodologies Working Group of the International Bone Marrow Adiposity Society. In: Frontiers in Endocrinology, Vol. 11, p. 65 [1-36] (2020). doi:10.3389/fendo.2020.00065.
Soares Frazao, Sandra. Review of imaging-based measurement techniques for free surface flows involving sediment transport and morphological changes. In: Journal of Hydroinformatics, Vol. 22, no.5, p. 958-971 (2020). doi:10.2166/hydro.2020.026.
Marot, Célestin. Reviving the Search for Optimal Tetrahedralizations. In: Proceedings of the 28th International Meshing Roundtable, Vol. https://zenodo.org/communities/imr28 (2020). doi:10.5281/zenodo.3653420.
Coppitters, Diederik ; De Paepe, Ward ; Contino, Francesco. Robust design optimization and stochastic performance analysis of a grid-connected photovoltaic system with battery storage and hydrogen storage. In: Energy, Vol. 213, no., p. 118798 (2020). doi:10.1016/j.energy.2020.118798.
Hoult, Ryan ; Appelle, Aaron ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Seismic performance of slender RC U-shaped walls with a single-layer of reinforcement. In: Engineering Structures, Vol. 225, no. 15, p. 111257 (2020). doi:10.1016/j.engstruct.2020.111257.
Li, Wenqi ; Estager, Julien ; Monbaliu, Jean‐Christophe M ; Debecker, Damien P. ; Luis Alconero, Patricia. Separation of bio‐based chemicals using pervaporation. In: Journal of Chemical Technology & Biotechnology, Vol. 95, no.9, p. 2311-2334 (2020). doi:10.1002/jctb.6434.
Sousa, Romain ; Saraiva Esteves Pacheco De Almeida, João ; António A. Correia ; Rui Pinho. Shake Table Blind Prediction Tests: Contributions for Improved Fibre-based Frame Modelling. In: Journal of Earthquake Engineering, (2020). doi:10.1080/13632469.2018.1466743 (Accepté/Sous presse).
Saraiva Esteves Pacheco De Almeida, João ; Steinmetz, Martin ; Rigot, Fabrice ; de Cock, Sébastien. Shape-memory NiTi alloy rebars in flexural-controlled large-scale reinforced concrete walls: Experimental investigation on self-centring and damage limitation. In: Engineering Structures, Vol. 220, no. 1 (2020) (2020). doi:10.1016/j.engstruct.2020.110865. doi:10.1016/j.engstruct.2020.110865. doi:10.14428/DVN/2QBQVJ.
Naili, C. ; Doghri, I. ; Kanit, T. ; Sukiman, M.S. ; Aissa-Berraies, A. ; Imad, A.. Short fiber reinforced composites: Unbiased full-field evaluation of various homogenization methods in elasticity. In: Composites Science and Technology, Vol. 187, p. 107942 (2020). doi:10.1016/j.compscitech.2019.107942.
Constant, Matthieu ; Coppin, Nathan ; Dubois, Frédéric ; Vidal, Valérie ; Legat, Vincent ; Lambrechts, Jonathan. Simulation of air invasion in immersed granular beds with an unresolved FEM–DEM model. In: Computational Particle Mechanics, Vol. 8, p. 535-560 (2021). doi:10.1007/s40571-020-00351-4.
Zeng, Xi ; Zhukova, Maria ; Faniel, Sébastien ; Proost, Joris ; Flandre, Denis. Structural and Opto‑electronic characterization of CuO thin films prepared by DC reactive magnetron sputtering. In: Journal of Materials Science: Materials in Electronics, Vol. 31, p. 4563-4573 (2020). doi:10.1007/s10854-020-03007-4.
Li, Wenqi ; Molina-Fernández, Cristhian ; Estager, Julien ; Monbaliu, Jean-Christophe M. ; Debecker, Damien P. ; Luis Alconero, Patricia. Supported ionic liquid membranes for the separation of methanol/dimethyl carbonate mixtures by pervaporation. In: Journal of Membrane Science, Vol. 598, p. 117790 (2020). doi:10.1016/j.memsci.2019.117790.
Giorgetti, Simone ; Coppitters, Diederik ; Contino, Francesco ; De Paepe, Ward ; Bricteux, Laurent ; Aversano, Gianmarco ; Parente, Alessandro. Surrogate-Assisted Modeling and Robust Optimization of a Micro Gas Turbine Plant With Carbon Capture. In: Journal of Engineering for Gas Turbines and Power, Vol. 142, no.1, p. 011010 (2020). doi:https://doi.org/10.1115/GT2019-91400. doi:https://doi.org/10.1115/GT2019-91400.
Le, Hoang-Anh ; Gratiot, Nicolas ; Santini, William ; Ribolzi, Olivier ; Tran, Duc ; Meriaux, Xavier ; Deleersnijder, Eric ; Soares Frazao, Sandra. Suspended sediment properties in the Lower Mekong River, from fluvial to estuarine environments. In: Estuarine, Coastal and Shelf Science, Vol. 233, p. 106522 (2019). doi:10.1016/j.ecss.2019.106522.
Xie, Xinliang ; Tan, Zhanqiu ; Chen, Chaoyue ; Xie, Yingchun ; Wu, Hongjian ; Yan, Xingchen ; Gao, Shuohong ; Li, Zhiqiang ; Ji, Gang ; Liao, Hanlin. Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition. In: Surface and Coatings Technology, Vol. 405, p. 126676 (2021). doi:10.1016/j.surfcoat.2020.126676.
Pascart, Tristan ; Paccou, Julien ; Colard, Thomas ; Norberciak, Laurène ; Girard, Julien ; Delattre, Jerôme ; Marchandise, Pierre ; Legrand, Julie ; Penel, Guillaume ; Coursier, Raphaël ; Putman, Sophie ; Cortet, Bernard ; Kerckhofs, Greet ; Budzik, Jean-François. T1-weighted MRI images accurately represent the volume and surface of architectural mineral damage of osteonecrosis of the femoral head: Comparison with high-resolution computed tomography. In: Bone, Vol. 130, p. 115099 (2020). doi:10.1016/j.bone.2019.115099.
Ding, Lipeng ; Raskin, Jean-Pierre ; Lumbeeck, Gunnar ; Schryvers, Dominique ; Idrissi, Hosni. TEM investigation of the role of the polycrystalline-silicon film/substrate interface in high quality radio frequency silicon substrates. In: Materials Characterization, Vol. 161, p. 110174 (2020). doi:10.1016/j.matchar.2020.110174.
Coppitters, Diederik ; Contino, Francesco ; El-Baz, Ahmed ; Breuhaus, Peter ; De Paepe, Ward. Techno-economic feasibility study of a solar-powered distributed cogeneration system producing power and distillate water: Sensitivity and exergy analysis. In: Renewable Energy, Vol. 150, no., p. 1089-1097 (2020). doi:10.1016/j.renene.2019.10.105.
Walschot, Maureen ; Luis Alconero, Patricia ; Liegeois, Michel. The challenges of reverse osmosis desalination: solutions in Jordan. In: Water International, Vol. 45, no. 2, p. 112-124 (2020). doi:10.1080/02508060.2020.1721191.
Wolanski, Eric ; Lambrechts, Jonathan. The net water circulation in the far Northern Great Barrier Reef. In: Estuarine, Coastal and Shelf Science, Vol. 235, no.5, p. 106569 (2020). doi:10.1016/j.ecss.2019.106569.
Li, Y. ; Morgan, T.W. ; Terentyev, D. ; Ryelandt, Sophie ; Favache, Audrey ; Wang, S. ; Wirtz, M. ; Hoefnagels, J.P.M. ; van Dommelen, J.A.W. ; De Temmerman, G. ; Verbeken, K. ; Geers, M.G.D.. Three mechanisms of hydrogen-induced dislocation pinning in tungsten. In: Nuclear Fusion, Vol. 60, no.8, p. 086015 (2020). doi:10.1088/1741-4326/ab98a4.
Lucas, Lisa V. ; Deleersnijder, Eric. Timescale Methods for Simplifying, Understanding and Modeling Biophysical and Water Quality Processes in Coastal Aquatic Ecosystems: A Review. In: Water, Vol. 12, no.10, p. 2717 (2020). doi:10.3390/w12102717.
Nikolaeva, Daria ; Luis Alconero, Patricia. Top-Down Polyelectrolytes for Membrane-Based Post-Combustion CO2 Capture. In: Molecules, Vol. 25, no.2, p. 323 (2020). doi:10.3390/molecules25020323.
Prihatiningtyas, Indah ; Hartanto, Yusak ; Van der Bruggen, Bart. Ultra-high flux alkali-treated cellulose triacetate/cellulose nanocrystal nanocomposite membrane for pervaporation desalination. In: Chemical Engineering Science, Vol. on line, p. 116276 (2020). doi:10.1016/j.ces.2020.116276.
Delannay, Francis ; Brassart, Laurence. Variational analysis of the influence of grain shape anisotropy on shear viscosity in Nabarro-Herring-Coble creep. In: Mechanics of Materials, Vol. 143, p. 103312 (2020). doi:10.1016/j.mechmat.2020.103312.
Guével, A. ; Rattez, Hadrien ; Veveakis, E.. Viscous phase-field modeling for chemo-mechanical microstructural evolution: application to geomaterials and pressure solution. In: International Journal of Solids and Structures, Vol. 207, no. 15 December 2020, p. 230-249 (2020). doi:10.1016/j.ijsolstr.2020.09.026.
Caprace, Denis-Gabriel ; Chatelain, Philippe ; Winckelmans, Grégoire. Wakes of rotorcraft in advancing flight: A large-eddy simulation study. In: Physics of Fluids, Vol. 32, no.8, p. 087107 (2020). doi:10.1063/5.0015162.
Nikolaeva, Daria ; Loïs, Sandrine ; Dahl, Paul Inge ; Sandru, Marius ; Jaschik, Jolanta ; Tanczyk, Marek ; Fuoco, Alessio ; Jansen, Johannes Carolus ; Vankelecom, Ivo F.J.. Water Vapour Promotes CO2 Transport in Poly(ionic liquid)/Ionic Liquid-Based Thin-Film Composite Membranes Containing Zinc Salt for Flue Gas Treatment. In: Applied Sciences, Vol. 10, no.11, p. 3859 (2020). doi:10.3390/app10113859.
Rattez, Hadrien ; Veveakis, M.. Weak phases production and heat generation control fault friction during seismic slip. In: Nature Communications, Vol. 11, no. 1, p. 1-8 (2020). doi:10.1038/s41467-019-14252-5.
Contino, Francesco ; Moret, Stefano ; Limpens, Gauthier ; Jeanmart, Hervé. Whole-energy system models: The advisors for the energy transition. In: Progress in Energy and Combustion Science, Vol. 81, p. 100872 (2020). doi:10.1016/j.pecs.2020.100872.
Wenk, Thomas ; Roland, Brunner ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Überprüfung bezüglich Erdbeben von Holzbalkendecken in Bestandesbauten. In: Bauingenieur, Vol. 95, no. 4, p. 1-6 (2020). doi:10.3929/ethz-b-000413418.
Gillis, Thomas ; Marichal, Yves ; Winckelmans, Grégoire ; Chatelain, Philippe. A 2D immersed interface Vortex Particle-Mesh method. In: Journal of Computational Physics, Vol. 394, p. 700-718 (2019). doi:10.1016/j.jcp.2019.05.033.
Verhetsel, K. ; Pellerin, J. ; Remacle, J.-F.. A 44-element mesh of Schneiders’ pyramid: Bounding the difficulty of hex-meshing problems. In: CAD Computer Aided Design, Vol. 116 (2019) (2019). doi:10.1016/j.cad.2019.102735.
Verhetsel, K. ; Pellerin, J. ; Remacle, Jean-François. A 44-element mesh of schneiders’ pyramid. In: 27th International Meshing Roundtable, IMR 2018, Vol. 127, p. 73-87 (2019). doi:10.1007/978-3-030-13992-6_5.
Deschuyteneer, Aurélie ; Zastavni, Denis ; Remacle, Jean-François. A geometrical approach to assess levels of structural robustness in statically indeterminate concrete elements. In: International Association for Shell and Spatial Structures. Bulletin, Vol. 2019, no. 12, p. 1-8 (2019).
Leclerc, Julien ; Nguyen, Van-Dung ; Pardoen, Thomas ; Noels, Ludovic. A micromechanics-based non-local damage to crack transition framework for porous elastoplastic solids. In: International Journal of Plasticity, Vol. 127, p. 102631 (2019). doi:10.1016/j.ijplas.2019.11.010.
Iavarone, S. ; Cafiero, M. ; Ferrarotti, M. ; Contino, Francesco ; Parente, A.. A multiscale combustion model formulation for NOx predictions in hydrogen enriched jet flames. In: International Journal of Hydrogen Energy, Vol. 44, no. 41, p. 23436-23457 (2019). doi:10.1016/j.ijhydene.2019.07.019.
Raoelison, Rija Nirina ; Li, Jishuai ; Sapanathan, Thaneshan ; Padayodi, Essole ; Buiron, Nicolas ; Racine, Dany ; Zhang, Zhan ; Marceau, Daniel ; Rachik, Mohamed. A new nature of microporous architecture with hierarchical porosity and membrane template via high strain rate collision. In: Materialia, Vol. 5, p. 100205 (2019). doi:10.1016/j.mtla.2018.100205.
Sapanathan, Thaneshan ; Jimenez-Mena, Norberto ; Sabirov, Ilchat ; Monclús, Miguel A. ; Molina-Aldareguia, Jon ; Xia, Peikang ; Zhao, Lv ; Simar, Aude. A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. In: Journal of Materials Science & Technology, Vol. 35, no. 9, p. 2048-2057 (2019). doi:10.1016/j.jmst.2019.05.004.
Hardy, Baptiste ; De Wilde, Juray ; Winckelmans, Grégoire. A penalization method for the simulation of weakly compressible reacting gas-particle flows with general boundary conditions. In: Computers & Fluids, Vol. 190, p. 294-307 (2019). doi:10.1016/j.compfluid.2019.06.016.
Pardoen, Benoît ; Pierre Bésuelle ; Stefano Dal Pont ; Philippe Cosenza ; Jacques Desrues. Accounting for small-scale heterogeneity and variability of argillite in homogenised numerical micromechanical response and microcracking. In: Rock Mechanics and Rock Engineering, (2019).
Sang Sefidi, Vida ; Luis Alconero, Patricia. Advanced Amino Acid-Based Technologies for CO2 Capture: A Review. In: Industrial & Engineering Chemistry Research, Vol. 58, no.44, p. 20181-20194 (2019). doi:10.1021/acs.iecr.9b01793.
Bhowmick, Sanjit ; Espinosa, Horacio ; Jungjohann, Katherine ; Pardoen, Thomas ; Pierron, Olivier. Advanced microelectromechanical systems-based nanomechanical testing: Beyond stress and strain measurements. In: MRS Bulletin, Vol. 44, no.06, p. 487-493 (2019). doi:10.1557/mrs.2019.123.
Fang, Yu ; Poncet, Sébastien ; Nesreddine, Hakim ; Bartosiewicz, Yann. An open-source density-based solver for two-phase CO2 flows: applications to Laval nozzles. In: International Journal of Refrigeration, Vol. 106, p. 526-538 (2019). doi:10.1016/j.ijrefrig.2019.05.016.
Maloberti, Olivier ; Mansouri, Omar ; Jouaffre, Denis ; Hamzaoui, Mohammed ; Derosiere, Jimmy ; Buiron, Nicolas ; Sansen, Pascal ; Sapanathan, Thaneshan ; Pelca, Philippe ; Rachik, Mohamed ; Leonard, Jean-Paul ; Lembrouck, Gregory ; Haye, Dominique ; Macret, Antoine. Analytical Design Model of Coil Parameters for the Electro-Magnetic Forming Technology – Case of the 1-Turn coil dedicated to tubular parts forming and crimping with 1D approximation. In: Journal of Materials Processing Technology, Vol. 266, p. 450-473 (2019). doi:10.1016/j.jmatprotec.2018.07.016.
Idrissi, Hosni ; Ghidelli, Matteo ; Béché, Armand ; Turner, Stuart ; Gravier, Sébastien ; Blandin, Jean-Jacques ; Raskin, Jean-Pierre ; Schryvers, Dominique ; Pardoen, Thomas. Atomic-scale viscoplasticity mechanisms revealed in high ductility metallic glass films. In: Scientific Reports, Vol. 9, no.1, p. 13426 (2019). doi:10.1038/s41598-019-49910-7.
Habibi, Hamed ; Rahimi Nohooji, Hamed ; Howard, Ian. Backstepping Nussbaum gain dynamic surface control for a class of input and state constrained systems with actuator faults. In: Information Sciences, Vol. 482, p. 27-46 (2019). doi:10.1016/j.ins.2018.12.084.
Limpens, Gauthier ; Jeanmart, Hervé ; Maréchal, François. Belgian Energy Transition: What Are the Options?. In: Energies, Vol. 13, no.261 (2020). doi:10.3390/en13010261.
Verhaegen, Carole ; Lepropre, Sophie ; Octave, Marie ; Brusa, Davide ; Bertrand, Luc ; Beauloye, Christophe ; Jacques, Pascal ; Kefer, Joëlle ; Horman, Sandrine. Bioreactivity of Stent Material: In Vitro Impact of New Twinning-Induced Plasticity Steel on Platelet Activation. In: Journal of Biomaterials and Nanobiotechnology, Vol. 10, no.04, p. 175-189 (2019). doi:10.4236/jbnb.2019.104010.
Brassart, Laurence ; Delannay, Francis. Bounds for shear viscosity in Nabarro–Herring–Coble creep. In: Mechanics of Materials, Vol. 137, p. 103106 (2019). doi:10.1016/j.mechmat.2019.103106.
Penel, Guillaume ; Kerckhofs, Greet ; Chauveau, Christophe. Brief Report From the 4th International Meeting on Bone Marrow Adiposity (BMA2018). In: Frontiers in Endocrinology, Vol. 10 (2019). doi:10.3389/fendo.2019.00691.
Grosshans, H. ; Villafañe, L. ; Banko, A. ; Papalexandris, Miltiadis. Case study on the influence of electrostatic charges on particle concentration in turbulent duct flows. In: Powder Technology, Vol. 357, p. 46-53 (2019). doi:10.1016/j.powtec.2019.08.106.
Gharsallaoui, Haythem ; Jafari, Mustafa ; Holeyman, Alain. Cavity Expansion in Rock Masses Obeying the “Hoek–Brown” Failure Criterion. In: Rock Mechanics and Rock Engineering, Vol. 52, no. 19, p. 1-15 (2019). doi:10.1007/s00603-019-01920-7.
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 50, p. 3502-3513 (2019). doi:10.1007/s11661-019-05265-2.
Dadi, D. ; Daba, G. ; Beyene, A. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Composting and co-composting of coffee husk and pulp with source-separated municipal solid waste: a breakthrough in valorization of coffee waste. In: International Journal of Recycling of Organic Waste in Agriculture, Vol. 8, no.3, p. 263-277 (2019). doi:10.1007/s40093-019-0256-8.
de Bournonville, Sébastien ; Vangrunderbeeck, Sarah ; Kerckhofs, Greet. Contrast-Enhanced MicroCT for Virtual 3D Anatomical Pathology of Biological Tissues: A Literature Review. In: Contrast Media & Molecular Imaging, Vol. 2019, no.-, p. 1-9 (2019). doi:10.1155/2019/8617406.
Mercier, Thomas ; Hardy, Clément ; Van Tichelen, Pierre ; Olivier, Mathieu ; De Jaeger, Emmanuel. Control of variable-speed pumps used as turbines for flexible grid-connected power generation. In: Electric Power Systems Research, Vol. 176, no.105962, p. 9 (2019). doi:10.1016/j.epsr.2019.105962.
Bakaeva, A. ; Makhlai, V. ; Terentyev, D. ; Zinovev, Aleksandr ; Herashchenko, S. ; Dubinko, A.. Correlation of hardness and surface microcracking in ITER specification tungsten exposed at QSPA Kh-50. In: Journal of Nuclear Materials, Vol. 520, no.-, p. 185-192 (2019). doi:10.1016/j.jnucmat.2019.04.008.
Janssens, Raphaël ; Cristovao, M.B. ; Bronze, M.R. ; Crespo, J.G. ; Pereira, V.J. ; Luis Alconero, Patricia. Coupling of nanofiltration and UV, UV/TiO2 and UV/H2O2 processes for the removal of anti-cancer drugs from real secondary wastewater effluent. In: Journal of Environmental Chemical Engineering, Vol. 7, no.5, p. 103351 (2019). doi:10.1016/j.jece.2019.103351.
Jaddi, Sahar ; Coulombier, Michaël ; Raskin, Jean-Pierre ; Pardoen, Thomas. Crack on a chip test method for thin freestanding films. In: Journal of the Mechanics and Physics of Solids, Vol. 123, p. 267-291 (2019). doi:10.1016/j.jmps.2018.10.005.
Zinovev, Aleksandr ; Iskandarov, Albert ; Dmitriev, Sergey ; Pshenichnyuk, Anatoly. Criteria of instability of copper and aluminium perfect crystals subjected to elastic deformation in the temperature range 0 – 400 K. In: Letters on Materials, Vol. 9, no.3, p. 265-269 (2019). doi:10.22226/2410-3535-2019-3-265-269.
Xiao, Xiazi ; Terentyev, D. ; Bakaev, A. ; Zinovev, Aleksandr ; Dubinko, A. ; Zhurkin, E.E.. Crystal plasticity finite element method simulation for the nano-indentation of plasma-exposed tungsten. In: Journal of Nuclear Materials, Vol. 518, no., p. 334-341 (2019). doi:10.1016/j.jnucmat.2019.03.018.
Zhang, R. ; Johnen, A. ; Remacle, Jean-François. Curvilinear mesh adaptation. In: 27th International Meshing Roundtable, IMR 2018, Vol. 127, p. 57-69 (2019). doi:10.1007/978-3-030-13992-6_4.
Fent, Ilaria ; Zech, Yves ; Soares Frazao, Sandra. Dam-break flow experiments over mobile bed: velocity profile. In: Journal of Hydraulic Research, Vol. 57, no. 1, p. 131-138. doi:10.1080/00221686.2018.1444677.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. In: Materials Science and Engineering: A, Vol. 764, p. 138210 (2019). doi:10.1016/j.msea.2019.138210.
Sandfeld, Stefan ; Samaee, Vahid ; Idrissi, Hosni ; Groten, Jonas ; Pardoen, Thomas ; Schwaiger, Ruth ; Schryvers, Dominique. Datasets for the analysis of dislocations at grain boundaries and during vein formation in cyclically deformed Ni micropillars. In: Data in Brief, Vol. 27, p. 104724 (2019). doi:10.1016/j.dib.2019.104724.
Maloberti, Olivier ; Mansouri, Omar ; Jouaffre, Denis ; Hamzaoui, Mohammed ; Derosiere, Jimmy ; Buiron, Nicolas ; Sapanathan, Thaneshan ; Pelca, Philippe ; Rachik, Mohamed ; Lembrouck, Gregory ; Haye, Dominique ; Leonard, Jean-Paul. Definition and calculation of single turn coils’ electrical, magnetic and electro-mechanical parameters for pulsed magnetic technologies with the finite element method and experiments. In: International Journal of Applied Electromagnetics and Mechanics, Vol. 61, no.4, p. 605-632 (2019). doi:10.3233/jae-180132.
Dehem, Stéphanie ; Montedoro, Vincenza ; Edwards, Martin Gareth ; Detrembleur, Christine ; Stoquart, Gaëtan ; Renders, Anne ; Heins, Sophie ; Dehez, Bruno ; Lejeune, Thierry. Development of a robotic upper limb assessment to configure a serious game. In: NeuroRehabilitation, Vol. 44, no. 2, p. 263-274 (2019). doi:10.3233/nre-182525.
Yin, Chao ; Terentyev, Dmitry ; Pardoen, Thomas ; Petrov, Roumen ; Tong, Zhenfeng. Ductile to brittle transition in ITER specification tungsten assessed by combined fracture toughness and bending tests analysis. In: Materials Science and Engineering: A, Vol. 750, p. 20-30 (2019). doi:10.1016/j.msea.2019.02.028.
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Van Hooreweder, Brecht ; Adrien, Jérôme ; Maire, Eric ; Buffière, Jean-Yves ; Ludwig, Wolfgang ; Jacques, Pascal ; Simar, Aude. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing. In: Scripta Materialia, Vol. 170, p. 124-128 (2019). doi:10.1016/j.scriptamat.2019.05.044.
Huang, Chunjie ; Yan, Xingchen ; Zhao, Lv ; Liu, Min ; Ma, Wenyou ; Wang, Weibing ; Soete, Jeroen ; Simar, Aude. Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing. In: Materials Science and Engineering: A, Vol. 755, p. 85-96 (2019). doi:10.1016/j.msea.2019.03.133.
Hinnekens, Simon ; Mahaudens, Philippe ; Detrembleur, Christine ; Fisette, Paul. EMG Measurements as inputs for a musculoskeletal model: quantification of abdominal and back muscle forces in static postures. In: Computer methods in biomechanics and biomedical engineering, Vol. 22, no. Suppl 1, p. S147-S149 (2019). doi:10.1080/10255842.2019.1668135.
Jafari, M. ; Gharsallaoui, H. ; Holeyman, A.. Effect of soil rigidity and tensile strength on bearing capacity of embedded foundations. In: Géotechnique Letters, Vol. 10, no.1, p. 1-6 (2020). doi:10.1680/jgele.19.00070.
Jafari, Mustafa ; Gharsallaoui, Haythem ; Victor, Karl Henry ; Holeyman, Alain. End bearing response of open-ended pipe piles embedded in rock. In: International Journal of Rock Mechanics and Mining Sciences, Vol. 119, no.-, p. 46-57 (2019). doi:10.1016/j.ijrmms.2019.04.008.
Limpens, Gauthier ; Jeanmart, Hervé ; Stefano Moret ; François Maréchal. EnergyScope TD: a novel open-source model for regional energy systems. In: Applied Energy, Vol. 255 (2019). doi:10.1016/j.apenergy.2019.113729.
Jimenez-Mena, Norberto ; Jacques, Pascal ; Ding, Lipeng ; Gauquelin, Nicolas ; Schryvers, Dominique ; Idrissi, Hosni ; Delannay, Francis ; Simar, Aude. Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers. In: Materials Science and Engineering: A, Vol. 740-741, p. 274-284 (2019). doi:10.1016/j.msea.2018.10.101.
Abed Zadeh, Aghil ; Barés, Jonathan ; Brzinski, Theodore A. ; Daniels, Karen E. ; Dijksman, Joshua ; Docquier, Nicolas ; Everitt, Henry O. ; Kollmer, Jonathan E. ; Lantsoght, Olivier ; Wang, Dong ; Workamp, Marcel ; Zhao, Yiqiu ; Zheng, Hu. Enlightening force chains: a review of photoelasticimetry in granular matter. In: Granular Matter, Vol. 21, no.4, p. 83 (2019). doi:10.1007/s10035-019-0942-2.
Van Verdeghem, Joachim ; Kluyskens, Virginie ; Dehez, Bruno. Experimental Investigations on Passively Levitated Electrodynamic Thrust Self-Bearing Motors. In: IEEE Transactions on Industry Applications, Vol. 55, no. 5, p. 4743 - 4753 (2019). doi:10.1109/TIA.2019.2926659.
Kluyskens, Virginie ; Van Verdeghem, Joachim ; Dehez, Bruno. Experimental Investigations on Self-Bearing Motors with Combined Torque and Electrodynamic Bearing Windings. In: Actuators, Vol. 8, no. 2, p. 48 (2019). doi:10.3390/act8020048.
Pochet, Maxime ; Dias, Véronique ; Moreau, Bruno ; Foucher, Fabrice ; Jeanmart, Hervé ; Contino, Francesco. Experimental and numerical study, under LTC conditions, of ammonia ignition delay with and without hydrogen addition. In: Combustion Institute. Proceedings, Vol. 37, p. 621-629. doi:10.1016/j.proci.2018.05.138. doi:10.1016/j.proci.2018.05.138.
Tarquini, Danilo ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Experimental investigation on the deformation capacity of lap splices under cyclic loading. In: Bulletin of Earthquake Engineering, Vol. 17, no. 12, p. 6645-6670 (2019). doi:10.1007/s10518-019-00692-3.
Abid, Najmul ; Hannard, Florent ; William Pro, J. ; Barthelat, Francois. Exploring the Fracture Toughness of Tessellated Materials With the Discrete-Element Method. In: Journal of Applied Mechanics, Vol. 86, no. 11, p. 111013 (2019). doi:10.1115/1.4044015.
Habibi, Hamed ; Rahimi Nohooji, Hamed ; Howard, Ian ; Simani, Silvio. Fault-Tolerant Neuro Adaptive Constrained Control of Wind Turbines for Power Regulation with Uncertain Wind Speed Variation. In: Energies, Vol. 12, no.24, p. 4712 (2019). doi:10.3390/en12244712.
Verhetsel, Kilian ; Pellerin, Jeanne ; Remacle, Jean-François. Finding hexahedrizations for small quadrangulations of the sphere. In: ACM Transactions on Graphics, Vol. 38, no.4, p. 53(1-13) (2019). doi:10.1145/3306346.3323017.
Zhao, Lv ; Ding, Lipeng ; Soete, Jeroen ; Idrissi, Hosni ; Kerckhofs, Greet ; Simar, Aude. Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness. In: Composites Part A: Applied Science and Manufacturing, Vol. 126, p. 105617 (2019). doi:10.1016/j.compositesa.2019.105617.
Roy, Geoffrey ; van der Rest, Camille ; Heymans, Sophie ; Quintin, Emilie ; Dupont, Védi ; Erauw, Jean-Pierre ; Schmitz, Alain ; Jacques, Pascal. Global Analysis of Influence of Contacts on Heusler-Based Thermoelectric Modules. In: Journal of Electronic Materials, Vol. 48, no. 9, p. 5390-5402 (2019). doi:10.1007/s11664-019-07137-2.
Xiao, Xiazi ; Terentyev, D. ; Ruiz, A. ; Zinovev, Aleksandr ; Bakaev, A. ; Zhurkin, E.E.. High temperature nano-indentation of tungsten: Modelling and experimental validation. In: Materials Science and Engineering: A, Vol. 743, no.-, p. 106-113 (2019). doi:10.1016/j.msea.2018.11.079.
De Clercq, Katrien ; Persoons, Eleonora ; Napso, Tina ; Luyten, Catherine ; Parac-Vogt, Tatjana N. ; Sferruzzi-Perri, Amanda N. ; Kerckhofs, Greet ; Vriens, Joris. High-resolution contrast-enhanced microCT reveals the true three-dimensional morphology of the murine placenta. In: Proceedings of the National Academy of Sciences, Vol. -, no.-, p. 201902688 (2019). doi:10.1073/pnas.1902688116.
Tipler, S. ; Mergulhaõ, C.S. ; Vanhove, G. ; Van Haute, Q. ; Contino, Francesco ; Coussement, A.. Ignition study of an oxygenated and high-alkene light petroleum fraction produced from automotive shredder residues. In: Energy and Fuels, Vol. 33, no. 6, p. 5664-5672 (2019). doi:10.1021/acs.energyfuels.9b00649.
Ismail, Karim ; Perlade, Astrid ; Jacques, Pascal ; Pardoen, Thomas ; Brassart, Laurence. Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels. In: International Journal of Plasticity, Vol. 118, p. 130-146 (2019). doi:10.1016/j.ijplas.2019.02.005.
Yin, Z. ; Hannard, Florent ; Barthelat, F.. Impact-resistant nacre-like transparent materials. In: Science, Vol. 364, no.6447, p. 1260-1263 (2019). doi:10.1126/science.aaw8988.
Constant, Matthieu ; Dubois, Frédéric ; Lambrechts, Jonathan ; Legat, Vincent. Implementation of an unresolved stabilised FEM-DEM model to solve immersed granular flows. In: Computational Particle Mechanics, Vol. 6, no. 2, p. 213-226 (01/04/2019). doi:10.1007/s40571-018-0209-4.
Proost, Joris ; Delvaux, Adeline. In-situ monitoring of hydrogen absorption into Ni thin film electrodes during alkaline water electrolysis. In: Electrochimica Acta, Vol. 322, p. 134752 (2019). doi:10.1016/j.electacta.2019.134752.
Dolci, Francesco ; Thomas, Denis ; Hilliard, Samantha ; Guerra, Carlos Fúnez ; Hancke, Ragnhild ; Ito, Hiroshi ; Jegoux, Mathilde ; Kreeft, Gijs ; Leaver, Jonathan ; Newborough, Marcus ; Proost, Joris ; Robinius, Martin ; Weidner, Eveline ; Mansilla, Christine ; Lucchese, Paul. Incentives and legal barriers for power-to-hydrogen pathways: An international snapshot. In: International Journal of Hydrogen Energy, Vol. 44, no.23, p. 11394-11401 (2019). doi:10.1016/j.ijhydene.2019.03.045.
Miotti Bettanini, Alvise ; Ding, Lipeng ; Mithieux, Jean-Denis ; Parrens, Coralie ; Idrissi, Hosni ; Schryvers, Dominique ; Delannay, Laurent ; Pardoen, Thomas ; Jacques, Pascal. Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel. In: Materials & Design, Vol. 162, p. 362 - 374 (2019). doi:10.1016/j.matdes.2018.12.005. doi:10.1016/j.matdes.2018.12.005.
Bolette, Adrien ; Lecloux, Geoffrey ; Rompen, Eric ; Albert, Adelin ; Kerckhofs, Greet ; Lambert, France. Influence of induced infection in medication-related osteonecrosis of the jaw development after tooth extraction: a study in rats. In: Journal of Cranio-Maxillofacial Surgery, Vol. 47, no. 2, p. 349-356 (2019). doi:10.1016/j.jcms.2018.08.011.
Bakaev, A. ; Zinovev, Aleksandr ; Terentyev, D. ; Bonny, G. ; Yin, Chao ; Castin, N. ; Mastrikov, Yu. A. ; Zhurkin, E. E.. Interaction of carbon with microstructural defects in a W-Re matrix: An ab initio assessment. In: Journal of Applied Physics, Vol. 126, no.7, p. 075110 (2019). doi:10.1063/1.5094441.
Dépinoy, S. ; Strepenne, F. ; Massart, T.J. ; Godet, S. ; Pardoen, Thomas. Interface toughening in multilayered systems through compliant dissipative interlayers. In: Journal of the Mechanics and Physics of Solids, Vol. 130, p. 1-20 (2019). doi:10.1016/j.jmps.2019.05.013.
Abedrabbo Ode, Gabriel ; Mahaudens, Philippe ; Detrembleur, Christine ; Mousny, Maryline ; Fisette, Paul. Intervertebral force computation: a non invasive computation method. In: Computer methods in biomechanics and biomedical engineering, Vol. 22, no. Suppl 1, p. S230-S232 (2019). doi:10.1080/10255842.2020.1714251.
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Zhang, Zhan ; Chen, X.-Grant ; Marceau, Daniel ; Simar, Aude ; Rachik, Mohamed. Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics. In: Materials Letters, Vol. 249, p. 177-179 (2019). doi:10.1016/j.matlet.2019.04.094.
Carrero, M.M. ; Sánchez, I.R. ; De Paepe, W. ; Parente, A. ; Contino, Francesco. Is there a future for small-scale cogeneration in Europe? Economic and policy analysis of the internal combustion engine, micro gas turbine and micro humid air turbine cycles. In: Energies, Vol. 12, no. 3 (2019) (2019). doi:10.3390/en12030413.
Hou, Yuliang ; Tie, Ying ; Li, Cheng ; Sapanathan, Thaneshan ; Rachik, Mohamed. Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations. In: Composites Part B: Engineering, Vol. 163, p. 669-680 (2019). doi:10.1016/j.compositesb.2018.12.153.
Coutel, Xavier ; Delattre, Jérôme ; Marchandise, Pierre ; Falgayrac, Guillaume ; Béhal, Hélène ; Kerckhofs, Greet ; Penel, Guillaume ; Olejnik, Cécile. Mandibular bone is protected against microarchitectural alterations and bone marrow adipose conversion in ovariectomized rats. In: Bone, Vol. 127, p. 343-352 (2019). doi:10.1016/j.bone.2019.06.031.
De Paepe, W. ; Renzi, M. ; Carrerro, M.M. ; Caligiuri, C. ; Contino, Francesco. Micro gas turbine cycle humidification for increased flexibility: Numerical and experimental validation of different steam injection models. In: Journal of Engineering for Gas Turbines and Power, Vol. 141, no.2 (2019). doi:10.1115/1.4040859.
Hou, Yuliang ; Cai, Shouyu ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Rachik, Mohamed. Micromechanical modeling of the effect of phase distribution topology on the plastic behavior of dual-phase steels. In: Computational Materials Science, Vol. 158, p. 243-254 (2019). doi:10.1016/j.commatsci.2018.11.025.
Cea, Andrew Ken ; Leenaers, A. ; Van den Berghe, S. ; Pardoen, Thomas. Microstructure and calorimetric analysis of the U Mn binary system. In: Journal of Nuclear Materials, Vol. 514, p. 380-392 (2019). doi:10.1016/j.jnucmat.2018.11.035.
Kovalev, Dmitry ; Vanhoenacker-Janvier, Danielle ; Billuart, Philippe ; Duponcheel, Matthieu ; Winckelmans, Grégoire. Modeling of Wake Vortex Radar Detection in Clear Air Using Large-Eddy Simulation. In: Journal of Atmospheric and Oceanic Technology, Vol. October 2019, no.10, p. 2045-2062 (2019). doi:10.1175/JTECH-D-18-0127.1.
Delannay, Laurent ; Lemoine, Guerric ; Coulombier, Michaël ; Pardoen, Thomas. Modelling creep induced by internal stresses in freestanding submicron Cu film. In: IOP Conference Series: Materials Science and Engineering, Vol. 580, p. 012003 (2019). doi:10.1088/1757-899x/580/1/012003.
Chevalier, Jérémy ; Camanho, P.P. ; Lani, Frédéric ; Pardoen, Thomas. Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy. In: Composite Structures, Vol. 209, p. 160-176 (2019). doi:10.1016/j.compstruct.2018.10.076.
Van der Noot, Nicolas ; Ijspeert, Auke Jan ; Ronsse, Renaud. Neuromuscular model achieving speed control and steering with a 3D bipedal walker. In: Autonomous Robots, Vol. 43, p. 1537-1554 (2019). doi:10.1007/s10514-018-9814-6.
Vincent, David ; Lambrechts, Jonathan ; Karatekin, Ozgur ; Van Hoolst, Tim ; Tyler, Robert H. ; Dehant, Véronique ; Deleersnijder, Eric. Normal modes and resonance in Ontario Lacus, a hydrocarbon lake of Titan. In: Ocean Dynamics, Vol. 69, p. 1121-1132 (2019). doi:10.1007/s10236-019-01290-2.
Pardoen, Benoît ; Konrad, Jean-Marie. Numerical Modeling of Zoned Rockfill Dam during Construction Considering Granular Interface Behavior. In: Journal of Geotechnical and Geoenvironmental Engineering, Vol. 145, no.3, p. - (2019). doi:10.1061/(ASCE)GT.1943-5606.0001997.
Hay, William Andrew ; Papalexandris, Miltiadis. Numerical simulations of turbulent thermal convection with a free-slip upper boundary. In: Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 475, p. #20190601 (2019). doi:10.1098/rspa.2019.0601.
Chevalier, Jérémy ; Morelle, X.P. ; Camanho, P.P. ; Lani, Frédéric ; Pardoen, Thomas. On a unique fracture micromechanism for highly cross-linked epoxy resins. In: Journal of the Mechanics and Physics of Solids, Vol. 122, p. 502-519 (2019). doi:10.1016/j.jmps.2018.09.028.
Mandy, Mélodie ; Georges, Cédric ; Sturel, T. ; Drillet, P. ; Jacques, Pascal. On the analysis of the simultaneous uptake and desorption of different isotopes of gaseous hydrogen by advanced high strength steels. In: Scripta Materialia, Vol. 161, p. 84-87 (2019). doi:10.1016/j.scriptamat.2018.09.034.
Hou, Yuliang ; Tie, Ying ; Li, Cheng ; Meng, Liang ; Sapanathan, Thaneshan ; Rachik, Mohamed. On the damage mechanism of high-speed ballast impact and compression after impact for CFRP laminates. In: Composite Structures, Vol. 229, no. 111435 (2019). doi:10.1016/j.compstruct.2019.111435.
Jimenez-Mena, Norberto ; Simar, Aude ; Jacques, Pascal. On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers. In: Materials & Design, Vol. 180, p. 107958 (2019). doi:10.1016/j.matdes.2019.107958.
Dépinoy, S. ; Massart, T.J. ; Godet, S. ; Pardoen, Thomas. On the mode I toughness of adhesive bonds exhibiting strain-softening and re-hardening. In: International Journal of Solids and Structures, Vol. 162, p. 1-13 (2019). doi:10.1016/j.ijsolstr.2018.11.026.
Marteleur, Matthieu ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Prima, Frédéric ; Schryvers, Dominique ; Jacques, Pascal. On the nucleation mechanism of {112}〈111〉mechanical twins in as-quenched β metastable Ti-12 wt.% Mo alloy. In: Materialia, Vol. 7, p. 100418 (2019). doi:10.1016/j.mtla.2019.100418.
de Radiguès de Chennevières, Quentin ; Thunis, Grégoire ; Proost, Joris. On the use of 3-D electrodes and pulsed voltage for the process intensification of alkaline water electrolysis. In: International Journal of Hydrogen Energy, Vol. 44, p. 29432-29440 (2019).
Giorgetti, S. ; Parente, A. ; Bricteux, L. ; Contino, Francesco ; De Paepe, W.. Optimal design and operating strategy of a carbon-clean micro gas turbine for combined heat and power applications. In: International Journal of Greenhouse Gas Control, Vol. 88, p. 469-481 (2019). doi:10.1016/j.ijggc.2019.07.003.
Feron, Jonas ; Boucher, Lindy ; Denoël, Vincent ; Latteur, Pierre. Optimization of Footbridges Composed of Prismatic Tensegrity Modules . In: Journal of Bridge Engineering, Vol. 24, no.12, p. 28 (2019). doi:10.1061/(ASCE)BE.1943-5592.0001438.
Beekman, Kerensa M. ; Zwaagstra, Marleen ; Veldhuis-Vlug, Annegreet G. ; van Essen, Huib W. ; den Heijer, Martin ; Maas, Mario ; Kerckhofs, Greet ; Parac-Vogt, Tatjana N. ; Bisschop, Peter H. ; Bravenboer, Nathalie. Ovariectomy increases RANKL protein expression in bone marrow adipocytes of C3H/HeJ mice. In: American Journal of Physiology-Endocrinology and Metabolism, Vol. 317, no.6, p. E1050-E1054 (2019). doi:10.1152/ajpendo.00142.2019.
Hou, Yuliang ; Zhao, Qiaoli ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Rachik, Mohamed. Parameter identifiability of ductile fracture criterion for DP steels using bi-level reduced surrogate model. In: Engineering Failure Analysis, Vol. 100, p. 300-311 (2019). doi:10.1016/j.engfailanal.2019.02.057.
Martin, Benoît ; Feron, Baptiste ; De Jaeger, Emmanuel ; Glineur, François ; Monti, Antonello. Peak shaving: a planning alternative to reduce investment costs in distribution systems?. In: Energy Systems, Vol. 10, p. 871-887 (2019). doi:10.1007/s12667-018-0299-3.
Favache, Audrey ; Daniel, Alain ; Teillet, Aline ; Pardoen, Thomas. Performance indices and selection of thin hard coatings on soft substrates for indentation and scratch resistance. In: Materials and Design, Vol. 176, p. 107827 (2019). doi:10.1016/j.matdes.2019.107827.
Janssens, Raphaël ; Cristóvão, Beatriz M. ; Bronze, Maria R. ; Crespo, Joao G. ; Pereira, Vanessa J. ; Luis Alconero, Patricia. Photocatalysis Using UV-A and UV-C Light Sources for Advanced Oxidation of Anti-Cancer Drugs Spiked in Laboratory-Grade Water and Synthetic Urine. In: Industrial & Engineering Chemistry Research, Vol. 59, no.2, p. 647-653 (2020). doi:10.1021/acs.iecr.9b04608.
Dupont, Elise. Poursuivre la croissance dans un monde 100% renouvelable? Limites physiques à la transition énergétique. In: L'ENA hors les murs, no.490 (2019).
Ceresiat, Lise ; Grosshans, Holger ; Papalexandris, Miltiadis. Powder electrification during pneumatic transport: The role of the particle properties and flow rates. In: Journal of Loss Prevention in the Process Industries, Vol. 58, no., p. 60-69 (2019). doi:10.1016/j.jlp.2019.01.010.
Angielczyk, W. ; Seynhaeve, Jean-Marie ; Gagan, Jerzy ; Bartosiewicz, Yann ; Butrymowicz, Dariusz. Prediction of critical mass rate of flashing carbon dioxide in convergent-divergent nozzle. In: Chemical Engineering & Processing, Vol. 143, p. 107599 (2019). doi:10.1016/j.cep.2019.107599.
Kästner, K. ; Hoitink, A. J. F. ; Torfs, P. J. J. F. ; Deleersnijder, Eric ; Ningsih, N. S.. Propagation of tides along a river with a sloping bed. In: Journal of Fluid Mechanics, Vol. 872, no., p. 39-73 (2019). doi:10.1017/jfm.2019.331.
Shams, Afaque ; Roelofs, Ferry ; Ničeno, Bojan ; Guo, W. ; Angeli, Diego ; Stalio, Enrico ; Fregni, Andrea ; Duponcheel, Matthieu ; Bartosiewicz, Yann ; Tiselj, Iztok ; Oder, Jure. Reference numerical database for turbulent flow and heat transfer in liquid metals. In: Nuclear Engineering and Design, Fusion, Vol. 353, no. 110274 (November 2019). doi:10.1016/j.nucengdes.2019.110274.
Jimenez mena, Norberto ; Sapanathan, Thaneshan ; Drezet, Jean-Marie ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction. In: Journal of Materials Processing Technology, Vol. 266, p. 651-661 (2019). doi:10.1016/j.jmatprotec.2018.11.030.
Chehade, Zaher ; Mansilla, Christine ; Lucchese, Paul ; Hilliard, Samantha ; Proost, Joris. Review and analysis of demonstration projects on power-to-X pathways in the world. In: International Journal of Hydrogen Energy, Vol. 44, no.51, p. 27637-27655 (2019). doi:10.1016/j.ijhydene.2019.08.260.
Leconte, Patricia ; Stoquart, Gaëtan ; Lejeune, Thierry ; Ronsse, Renaud. Rhythmic robotic training enhances motor skills of both rhythmic and discrete upper-limb movements after stroke : a longitudinal pilot study. In: International Journal of Rehabilitation Research, Vol. 42(1):46-55., no. 1, p. 46-55 (2019). doi:10.1097/mrr.0000000000000325.
Montedoro, Vincenza ; Alsamour, Marie ; Dehem, Stéphanie ; Lejeune, Thierry ; Dehez, Bruno ; Edwards, Martin. Robot diagnosis test for egocentric and allocentric hemineglect. In: Archives of Clinical Neuropsychology, Vol. 34, no. 4, p. 481-494 (2019). doi:10.1093/arclin/acy062.
De Paepe, W. ; Coppitters, D. ; Abraham, S. ; Tsirikoglou, P. ; Ghorbaniasl, G. ; Contino, Francesco. Robust Operational Optimization of a Typical micro Gas Turbine. In: Energy Procedia, Vol. 158, p. 5795-5803 (2019). doi:10.1016/j.egypro.2019.01.549.
Bernier, Caroline ; Gazzola, Mattia ; Ronsse, Renaud ; Chatelain, Philippe. Simulations of propelling and energy harvesting articulated bodies via vortex particle-mesh methods. In: Journal of Computational Physics, Vol. 392, p. 34-55 (1 september 2019). doi:10.1016/j.jcp.2019.04.036.
Ballout, Wael ; Van Velthem, Pascal ; Magnin, Delphine ; Henry, E ; Sclavons, Michel ; Pardoen, Thomas ; Bailly, Christian. Specific influence of polyethersulfone functionalization on the delamination toughness of modified carbon fiber reinforced polymer processed by resin transfer molding. In: Polymer Engineering & Science, Vol. 59, no. 5, p. 996-1009 (2019). doi:10.1002/pen.25055.
Poulain, Raphaël ; Proost, Joris ; Klein, Andreas. Sputter Deposition of Transition Metal Oxides on Silicon: Evidencing the Role of Oxygen Bombardment for Fermi‐Level Pinning. In: physica status solidi (a), Vol. 216, no.23, p. 1900730 (2019). doi:10.1002/pssa.201900730.
Van Verdeghem, Joachim ; Kluyskens, Virginie ; Dehez, Bruno. Stability and Performance Analysis of Electrodynamic Thrust Bearings. In: Actuators, Vol. 8, no. 1, p. 11 (2019). doi:10.3390/act8010011.
Proost, Joris. State‐of‐the art CAPEX data for water electrolysers, and their impact on renewable hydrogen price settings. In: International Journal of Hydrogen Energy, Vol. 44, no. 9, p. 4406-4413 (2019). doi:10.1016/j.ijhydene.2018.07.164.
Aleixo, Rui ; Soares Frazao, Sandra ; Zech, Yves. Statistical analysis methods for transient flows – the dam-break case. In: Journal of Hydraulic Research, Vol. 57, no. 5, p. 688-701 (2019). doi:10.1080/00221686.2020.1780505.
Delannay, Francis ; Brassart, Laurence. Strain rate dependence of the contribution of surface diffusion to bulk sintering viscosity. In: Journal of the American Ceramic Society, Vol. 102, no. 2, p. 736-747 (2019). doi:10.1111/jace.16058.
Ding, Lipeng ; Orekhov, Andrey ; Weng, Yaoyao ; Jia, Zhihong ; Idrissi, Hosni ; Schryvers, Dominique ; Muraishi, Shiji ; Hao, Longlong ; Liu, Qing. Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography. In: Journal of Materials Science, (2019). doi:10.1007/s10853-019-03427-6.
Coppitters, Diederik ; De Paepe, W. ; Contino, Francesco. Surrogate-assisted robust design optimization and global sensitivity analysis of a directly coupled photovoltaic-electrolyzer system under techno-economic uncertainty. In: Applied Energy, p. 310-320 (2019). doi:10.1016/j.apenergy.2019.04.101.
Bampole, David Lukumu ; Luis Alconero, Patricia ; Mulaba-Bafubiandi, Antoine. F.. Sustainable copper extraction from mixed chalcopyrite–chalcocite using biomass. In: Transactions of Nonferrous Metals Society of China, Vol. 29, no.10, p. 2170-2182 (2019). doi:10.1016/s1003-6326(19)65123-x.
Gérardy, Romaric ; Morodo, Romain ; Estager, Julien ; Luis Alconero, Patricia ; Debecker, Damien P. ; Monbaliu, Jean-Christophe M.. Sustaining the Transition from a Petrobased to a Biobased Chemical Industry with Flow Chemistry. In: Topics in Current Chemistry, Vol. 377, p. 1 (2019). doi:10.1007/s41061-018-0222-3.
Coppitters, D. ; De Paepe, W. ; Contino, Francesco. Techno-economic uncertainty quantification and robust design optimization of a directly coupled photovoltaic-electrolyzer system. In: Energy Procedia, Vol. 158, p. 1750-1756. doi:10.1016/j.egypro.2019.01.405.
Cushman-Roisin, Benoît ; Deleersnijder, Eric. To-to-bottom Ekman Layer and its implications for shallow rotating flows. In: Environmental Fluid Mechanics (Dordrecht, 2001), Vol. 19, p. 1105-1119 (2019). doi:10.1007/s10652-018-9611-y.
Cristóvão, M.B. ; Torrejais, J. ; Janssens, R. ; Luis Alconero, Patricia ; Van der Bruggen, B. ; Dubey, K.K. ; Mandal, M.K. ; Bronze, M.R. ; Crespo, J.G. ; Pereira, V.J.. Treatment of anticancer drugs in hospital and wastewater effluents using nanofiltration. In: Separation and Purification Technology, Vol. 224, no.1, p. 273-280 (2019). doi:10.1016/j.seppur.2019.05.016.
Pochet, Maxime ; Jeanmart, Hervé ; Contino, Francesco. Uncertainty quantification from raw measurements to post-processed datas : a general methodology and its application to an homogeneous-charge compression-ignition engine. In: International Journal of Engine Research. doi:10.1177/1468087419892697.
Tarquini, Danilo ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Uniaxial cyclic tests on reinforced concrete members with lap splices. In: Earthquake Spectra. doi:10.1193/041418EQS091DP.
Mallmann, C. ; Hannard, Florent ; Ferrié, E. ; Simar, Aude ; Daudin, R. ; Lhuissier, P. ; Pacureanu, A. ; Fivel, M.. Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites. In: Materials Science and Engineering: A, Vol. 764, p. 138170 (2019). doi:10.1016/j.msea.2019.138170.
Rindt, P. ; Mata González, J. ; Hoogerhuis, P. ; van den Bosch, P. ; van Maris, M. ; Terentyev, D. ; Yin, Chao ; Wirtz, M. ; Lopes Cardozo, N.J. ; van Dommelen, J.A.W. ; Morgan, T.W.. Using 3D-printed tungsten to optimize liquid metal divertor targets for flow and thermal stresses. In: Nuclear Fusion, Vol. 59, no.5, p. 054001 (2019). doi:10.1088/1741-4326/ab0a76.
Dehem, Stéphanie ; Montedoro, vincezana ; Brouwers, Isaline ; Edwards, Martin ; Detrembleur, Christine ; Stoquart, gaetan ; Renders, Anne ; Heins, Sophie ; Dehez, Bruno ; Lejeune, Thierry. Validation of a robot serious game assessment protocol for upper limb motor impairment in children with cerebral palsy. In: NeuroRehabilitation, Vol. 45, no. 2, p. 137-149 (2019). doi:10.3233/nre-192745.
Gérardy, Romaric ; Estager, Julien ; Luis Alconero, Patricia ; Debecker, Damien P. ; Monbaliu, Jean-Christophe M.. Versatile and scalable synthesis of cyclic organic carbonates under organocatalytic continuous flow conditions. In: Catalysis Science & Technology, Vol. 9, no.24, p. 6841-6851 (2019). doi:10.1039/c9cy01659g.
Mahanta, P. ; Saha, U.K. ; Zayoud, Azd. A Novel Method of Pure Oxy-fuel Circulating Fluidized Bed Combustion with Zero Recirculation Flue Gas – Experimental Validation. In: Materials Today: Proceedings, Vol. 5, no. 11, p. 23136-23147 (2018). doi:10.1016/j.matpr.2018.11.044.
Coutel, Xavier ; Olejnik, Cécile ; Marchandise, Pierre ; Delattre, Jérôme ; Béhal, Hélène ; Kerckhofs, Greet ; Penel, Guillaume. A Novel microCT Method for Bone and Marrow Adipose Tissue Alignment Identifies Key Differences Between Mandible and Tibia in Rats.. In: Calcified tissue international, Vol. 103, no. 2, p. 189-197 (2018). doi:10.1007/s00223-018-0397-1.
Parmentier, Philippe ; Winckelmans, Grégoire ; Chatelain, Philippe. A Vortex Particle-Mesh method for subsonic compressible flows. In: Journal of Computational Physics, Vol. 354, p. 692-716 (1 February 2018). doi:10.1016/j.jcp.2017.10.040.
Delandmeter, Philippe ; Lambrechts, Jonathan ; Legat, Vincent ; Vallaeys, Valentin ; Naithani, Jaya ; Thiery, Wim ; Remacle, Jean-François ; Deleersnijder, Eric. A fully consistent and conservative vertically adaptive coordinate system for SLIM 3D v0.4 with an application to the thermocline oscillations of Lake Tanganyika. In: Geoscientific Model Development, Vol. 11, no.3, p. 1161-1179 (2018). doi:10.5194/gmd-11-1161-2018.
Hou, Yuliang ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Culière, Pierre ; Rachik, Mohamed. A novel development of bi-level reduced surrogate model to predict ductile fracture behaviors. In: Engineering Fracture Mechanics, Vol. 188, p. 232-249 (2018). doi:10.1016/j.engfracmech.2017.08.021.
Vincent, David ; Karatekin, Özgür ; Lambrechts, Jonathan ; Lorenz, Ralph D. ; Dehant, Véronique ; Deleersnijder, Eric. A numerical study of tides in Titan′s northern seas, Kraken and Ligeia Maria. In: Icarus, Vol. 310, p. 105-126 (2018). doi:10.1016/j.icarus.2017.12.018.
Cao, Wenchao ; Sun, Tao ; Kerckhofs, Greet ; Fardell, Gemma ; Price, Ben ; Dewulf, Wim. A simulation-based study on the influence of the x-ray spectrum on the performance of multi-material beam hardening correction algorithms. In: Measurement Science and Technology, Vol. 29, no. 9, p. 095002 (2018). doi:10.1088/1361-6501/aacba0.
Habibi, Hamed ; Rahimi Nohooji, Hamed ; Howard, Ian. Adaptive PID Control of Wind Turbines for Power Regulation With Unknown Control Direction and Actuator Faults. In: IEEE Access, Vol. 6, p. 37464-37479 (2018). doi:10.1109/access.2018.2853090.
Ye, Wenyuan ; Lin, Jiuyang ; Borrego, Ricard ; Chen, Dong ; Sotto, Arcadio ; Luis Alconero, Patricia ; Liu, Minghua ; Zhao, Shuaifei ; Tang, Chuyang Y. ; Van der Bruggen, Bart. Advanced desalination of dye/NaCl mixtures by a loose nanofiltration membrane for digital ink-jet printing. In: Separation and Purification Technology, Vol. 197, no. 1, p. 27-35 (2018). doi:10.1016/j.seppur.2017.12.045.
Moens, Maud ; Duponcheel, Matthieu ; Winckelmans, Grégoire ; Chatelain, Philippe. An Actuator Disk method with tip-loss correction based on local effective upstream velocities. In: Wind Energy, Vol. 21, no. 9, p. 766-782. doi:10.1002/we.2192.
Descamps, Thierry ; Monhonval, Michel ; Latteur, Pierre. An assessment methodology for timber beams in a restoration context, based on a dimensionless formulation of EC5 design criteria. In: International Journal of Architectural Heritage, Vol. Volume 12, 2018, no.12, p. 726-733. doi:10.1080/15583058.2018.1442527.
Tie, Ying ; Hou, Yuliang ; Li, Cheng ; Zhou, Xihui ; Sapanathan, Thaneshan ; Rachik, Mohamed. An insight into the low-velocity impact behavior of patch-repaired CFRP laminates using numerical and experimental approaches. In: Composite Structures, Vol. 190, p. 179-188 (2018). doi:10.1016/j.compstruct.2018.01.075.
Iavarone, S. ; Oreluk, J. ; Smith, S.T. ; Hegde, A. ; Li, W. ; Packard, A. ; Frenklach, M. ; Smith, P.J. ; Contino, Francesco ; Parente, A.. Application of Bound-to-Bound Data Collaboration approach for development and uncertainty quantification of a reduced char combustion model. In: Fuel, Vol. 232, p. 769-779 (2018). doi:10.1016/j.fuel.2018.05.113.
Li, Wenqi ; Sreerangappa, Ramesh ; Estager, Julien ; Monbaliu, Jean-Christophe M. ; Debecker, Damien P. ; Luis Alconero, Patricia. Application of pervaporation in the bio-production of glycerol carbonate. In: Chemical Engineering and Processing - Process Intensification, Vol. 132, p. 127-136 (2018). doi:10.1016/j.cep.2018.08.014.
Li, Z. ; Lewandowski, M.T. ; Contino, Francesco ; Parente, A.. Assessment of On-the-Fly Chemistry Reduction and Tabulation Approaches for the Simulation of Moderate or Intense Low-Oxygen Dilution Combustion. In: Energy and Fuels, Vol. 32, no.10, p. 10121-10131 (2018). doi:10.1021/acs.energyfuels.8b01001.
Dadi, Dessalegn ; Mengistie, Embialle ; Terefe, Gudina ; Getahun, Tadesse ; Haddis, Alemayehu ; Birke, Wondwossen ; Beyene, Abebe ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Assessment of the effluent quality of wet coffee processing wastewater and its influence on downstream water quality. In: Ecohydrology & Hydrobiology, Vol. 18, no. 2, p. 201-211 (2017). doi:10.1016/j.ecohyd.2017.10.007.
Van der Noot, Nicolas ; Ijspeert, Auke Jan ; Ronsse, Renaud. Bio-inspired controller achieving forward speed modulation with a 3D bipedal walker. In: The International Journal of Robotics Research, Vol. 37, p. 168-196 (2018). doi:10.1177/0278364917743320.
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part I. In: Advances in Chemical Engineering, Vol. 52, p. 2-192 (2018).
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part II. In: Advances in Chemical Engineering, Vol. 53, p. 2-245 (2018).
Bourgeois, Nicolas ; Goldsborough, S.S. ; Jeanmart, Hervé ; Contino, Francesco. CFD simulations of Rapid Compression Machines using detailed chemistry: Evaluation of the ‘crevice containment’ concept. In: Combustion and Flame, Vol. 189, p. 225-239 (2018). doi:10.1016/j.combustflame.2017.10.033.
Ruiz Salmon, Israel ; Cambier, Nicolas ; Luis Alconero, Patricia. CO2 Capture by Alkaline Solution for Carbonate Production: A Comparison between a Packed Column and a Membrane Contactor. In: Applied Sciences, Vol. 8, no.6, p. 996 (2018). doi:10.3390/app8060996.
Ren, Xueping ; Chen, Xiaohui ; Xiong, Zhiping. Characterization and analysis of diffusion bonding process in a Cr25Ni7Mo4MnSi duplex stainless steel. In: Journal of Manufacturing Processes, Vol. 34, p. 603-613 (2018). doi:10.1016/j.jmapro.2018.07.005.
Weng, Yaoyao ; Jia, Zhihong ; Ding, Lipeng ; Muraishi, Shinji ; Liu, Qing. Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition. In: Materials Science and Engineering: A, Vol. 732, p. 273-283 (2018). doi:10.1016/j.msea.2018.07.018.
Raoelison, Rija Nirina ; Xie, Yingchun ; Sapanathan, Thaneshan ; Planche, Marie Pierre ; Kromer, Robin ; Costil, Sophie ; Langlade, Cécile. Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date. In: Additive Manufacturing, Vol. 19, p. 134-159 (2018). doi:10.1016/j.addma.2017.07.001.
Amani, Yasin ; Dancette, Sylvain ; Delroisse, Pauline ; Simar, Aude ; Maire, Eric. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches. In: Acta Materialia, Vol. 159, p. 395-407 (2018). doi:10.1016/j.actamat.2018.08.030.
Amelio, Antonio ; Figueroa Paredes, Danilo Alexander ; Degrève, Jan ; Luis Alconero, Patricia ; Van der Bruggen, Bart ; Espinosa, José. Conceptual model-based design and environmental evaluation of waste solvent technologies: Application to the separation of the mixture acetone-water. In: Separation Science and Technology, Vol. 53, no. 11, p. 1791-1810 (2018). doi:10.1080/01496395.2018.1442858.
Franzini Fabian ; Soares Frazao, Sandra. Coupled finite-volume scheme with adapted Augmented Roe scheme for simulating morphological evolution in arbitrary cross-sections. In: Journal of Hydroinformatics, Vol. 20, no. 5, p. 1111-1130 (2018). doi:10.2166/hydro.2018.109.
Rosso, Angelica ; Jimenez-Roa, Lisandro A. ; Saraiva Esteves Pacheco De Almeida, João ; Zuniga, Aydee Patricia Guerrero ; Blandón, Carlos A. ; Bonett, Ricardo L. ; Beyer, Katrin. Cyclic tensile-compressive tests on thin concrete boundary elements with a single layer of reinforcement prone to out-of-plane instability. In: Bulletin of Earthquake Engineering, Vol. 16, no. 2, p. 859-887 (2018). doi:10.1007/s10518-017-0228-1.
Tang, Xiaohui ; Reckinger, Nicolas ; Poncelet, Olivier ; Louette, Pierre ; Urea-Begara F. ; Idrissi, Hosni ; Turner S. ; Cabossart D. ; Colomer J.F. ; Raskin, Jean-Pierre. Damage evaluation in graphene underlying atomic deposition dielectrics. In: Belvac News - Société Belge de Vacuologie asbl, Vol. 63, no. 3, p. 1-18 (2018). doi:10.1038/srep13523.
Duisit, Jérôme ; Orlando, Giuseppe ; Debluts, Donovan ; Maistriaux, Louis ; Xhema, Daela ; de Bisthoven, Yann-Alex J ; Galli, Cesare ; Peloso, Andrea ; Behets Wydemans, Catherine ; Lengelé, Benoît ; Gianello, Pierre. Decellularization of the Porcine Ear Generates a Biocompatible, Nonimmunogenic Extracellular Matrix Platform for Face Subunit Bioengineering.. In: Annals of Surgery, Vol. 267, no. 6, p. 1191-1201 (2018). doi:10.1097/SLA.0000000000002181.
Ji, Wei ; Kerckhofs, Greet ; Geeroms, Carla ; Marechal, Marina ; Geris, Liesbet ; Luyten, Frank P. Deciphering the combined effect of bone morphogenetic protein 6 and calcium phosphate on bone formation capacity of periosteum derived cells-based tissue engineering constructs.. In: Acta biomaterialia, Vol. 80, p. 97-107 (2018). doi:10.1016/j.actbio.2018.09.046.
Georgiou, Michail ; Papalexandris, Miltiadis. Direct numerical simulation of turbulent heat transfer in a T-junction. In: Journal of Fluid Mechanics, Vol. 845, p. 581-614 (2018). doi:10.1017/jfm.2018.256.
Vallaeys, Valentin ; Kärnä, Tuomas ; Delandmeter, Philippe ; Lambrechts, Jonathan ; Baptista, António M. ; Deleersnijder, Eric ; Hanert, Emmanuel. Discontinuous Galerkin modeling of the Columbia River’s coupled estuary-plume dynamics. In: Ocean Modelling, Vol. 124, p. 111-124 (2018). doi:10.1016/j.ocemod.2018.02.004.
Samaee, Vahid ; Gatti, Riccardo ; Devincre, Benoit ; Pardoen, Thomas ; Schryvers, Dominique ; Idrissi, Hosni. Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing.. In: Scientific reports, Vol. 8, no.1, p. 12012 (2018). doi:10.1038/s41598-018-30639-8.
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel. In: Scripta Materialia, Vol. 157, p. 6-9 (2018). doi:10.1016/j.scriptamat.2018.07.030.
Van Verdeghem, Joachim ; Lefebvre, Martin ; Kluyskens, Virginie ; Dehez, Bruno. Dynamical Modelling of Passively Levitated Electrodynamic Thrust Self-Bearing Machines. In: IEEE Transactions on Industry Applications, Vol. 55, no. 2, p. 1447-1460 (March-April 2019). doi:10.1109/TIA.2018.2880422.
Bhaduri, S. ; Jeanmart, Hervé ; Contino, Francesco. EGR control on operation of a tar tolerant HCCI engine with simulated syngas from biomass. In: Applied Energy, Vol. 227, p. 159-167 (2018). doi:10.1016/j.apenergy.2017.08.233.
Lumbeeck, Gunnar ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Favache, Audrey ; Delmelle, Renaud ; Samaee, Vahid ; Proost, Joris ; Pardoen, Thomas ; Schryvers, Dominique. Effect of hydriding induced defects on the small-scale plasticity mechanisms in nanocrystalline palladium thin films. In: Journal of Applied Physics, Vol. 124, no.22, p. 225105 (2018). doi:https://doi.org/10.1063/1.5055274. doi:10.1063/1.5055274.
Johnen, A. ; Geuzaine, C. ; Toulorge, T. ; Remacle, J.-F.. Efficient computation of the minimum of shape quality measures on curvilinear finite elements. In: CAD Computer Aided Design, Vol. 103, p. 24-33 (2018). doi:10.1016/j.cad.2018.03.001.
Limpens, Gauthier ; Jeanmart, Hervé. Electricity storage needs for the energy transition : an EROI based analysis illustrated by the case of Belgium. In: Energy, Vol. 152, p. 960-973 (01/06/2018). doi:10.1016/j.energy.2018.03.180.
Poulain, Raphaël ; Klein, Andreas ; Proost, Joris. Electro‐catalytic properties of (100), (110) and (111) oriented NiO thin films towards the Oxygen evolution reaction. In: The Journal of Physical Chemistry Part C: Nanomaterials and Interfaces, Vol. 122, p. 22252-22263 (2018). doi:10.1021/acs.jpcc.8b05790.
Delmelle, Renaud ; Terreni, Jasmin ; Remhof, Arndt ; Heel, Andre ; Proost, Joris ; Borschulte, Andreas. Evolution of Water Diffusion in a Sorption-Enhanced Methanation Catalyst. In: Catalysts, Vol. 8, no.9, p. 341 (2018). doi:10.3390/catal8090341 (registering DOI).
Mbuyi Katshiatshia, Haddy ; Dias, Véronique ; Jeanmart, Hervé. Experimental and numerical study of ethyl valerate flat flames at low pressure. In: Combustion Science and Technology, Vol. 190, no. 4, p. 632-662 (2018). doi:10.1080/00102202.2017.1403910.
Coudou, Nicolas ; Buckingham, Sophia ; Bricteux, Laurent ; van Beeck, Jeroen. Experimental study on the wake meandering within a scale model wind farm subject to a wind-tunnel flow simulating an atmospheric boundary layer. In: Boundary-Layer Meteorology, Vol. 167, no.1, p. 77-98 (2018). doi:10.1007/s10546-017-0320-8.
Grosshans, Holger ; Papalexandris, Miltiadis. Exploring the mechanism of inter-particle charge diffusion. In: The European Physical Journal - Applied Physics, Vol. 82, p. #11101 (2018). doi:10.1051/epjap/2018170360.
Remacle, Jean-François ; Lambrechts, Jonathan. Fast and robust mesh generation on the sphere—Application to coastal domains. In: Computer-Aided Design, Vol. 103, p. 14-23 (2018). doi:10.1016/j.cad.2018.03.002.
Gillis, Thomas ; Winckelmans, Grégoire ; Chatelain, Philippe. Fast immersed interface Poisson solver for 3D unbounded problems around arbitrary geometries. In: Journal of Computational Physics, Vol. 354, p. 403-416 (1 February 2018). doi:10.1016/j.jcp.2017.10.042.
Saadouki, Bouchra ; Sapanathan, Thaneshan ; Pelca, Philippe ; Elghorba, Mohamed ; Rachik, Mohamed. Fatigue damage in fieldshapers used during electromagnetic forming and welding processes at high frequency impulse current. In: International Journal of Fatigue, Vol. 109, p. 93-102 (2018). doi:10.1016/j.ijfatigue.2017.12.019.
Goessens, Sébastien ; Mueller, Caitlin ; Latteur, Pierre. Feasibility study for drone-based masonry construction of real-scale structures. In: Automation in Construction, Vol. 94, p. 458-480 (2018).
Liu, H. ; Lin, Fengxiang ; Zhao, P. ; Moelans, N. ; Wang, Y. ; Nie, J.F.. Formation and autocatalytic nucleation of co-zone {101¯2} deformation twins in polycrystalline Mg: A phase field simulation study. In: Acta Materialia, Vol. 153, no.153, p. 86-107 (2018). doi:10.1016/j.actamat.2018.04.043.
de Kerchove, Laurent ; Momeni, Mona ; Aphram, Gaby ; Watremez, Christine ; Bollen, Xavier ; Jashari, Ramadan ; Boodhwani, Munir ; Astarci, Parla ; Noirhomme, Philippe ; El Khoury, Gebrine. Free margin length and coaptation surface area in normal tricuspid aortic valve: an anatomical study. In: European Journal of Cardio-Thoracic Surgery, Vol. 53, no. 5, p. 1040-1048 (2018). doi:10.1093/ejcts/ezx456.
Ratan, Sanjiv ; De Wilde, Juray. Gearing up for future steam reforming. In: Nitrogen + Syngas, Vol. 353, p. 44-48 (2018).
Poncelet, Olivier ; Rasson, Jonathan ; Tuyaerts, Romain ; Coulombier, Michaël ; Kotipalli, Ratan Raja Venkata ; Raskin, Jean-Pierre ; Francis, Laurent. Hemispherical cavities on silicon substrates: an overview of micro fabrication techniques. In: Materials Research Express, Vol. 5, no. 4, p. 045702 (2018). doi:10.1088/2053-1591/aab907.
Frère, Ariane ; Hillewaert, Koen ; Chatelain, Philippe ; Winckelmans, Grégoire. High Reynolds Number Airfoil: From Wall-Resolved to Wall-Modeled LES. In: Flow, Turbulence and Combustion, Vol. 101, no. 2, p. 457–476. doi:10.1007/s10494-018-9972-9.
Simar, Aude ; Godet, Stéphane ; Watkins, Thomas R.. Highlights of the special issue on metal additive manufacturing. In: Materials Characterization, Vol. 143, p. 1-4 (2018). doi:10.1016/j.matchar.2018.06.013.
Bourgeois, Nicolas ; Jeanmart, Hervé ; Winckelmans, Grégoire ; Lamberts, Olivier ; Contino, Francesco. How to ensure the interpretability of experimental data in Rapid Compression Machines? A method to validate piston crevice designs. In: Combustion and Flame, Vol. 198, p. 393-411 (2018). doi:10.1016/j.combustflame.2018.09.030.
Pellerin, J. ; Johnen, A. ; Verhetsel, K. ; Remacle, J.-F.. Identifying combinations of tetrahedra into hexahedra: A vertex based strategy. In: CAD Computer Aided Design, Vol. 105, p. 1-10 (2018). doi:10.1016/j.cad.2018.05.004 (Soumis).
Lin, Fengxiang ; Zhang, Yubin ; Pantleon, Wolfgang ; Juul Jensen, Dorte. Importance of Non-uniform Boundary Migration for Recrystallization Kinetics. In: Metallurgical and Materials Transactions A, Vol. 49, no.11, p. 5246-5258 (2018). doi:10.1007/s11661-018-4846-2.
Piret, Nicolas ; Santoro, Ronny ; Dogot, Loïck ; Barthélemy, Bastien ; Peyroux, Eugénie ; Proost, Joris. Influence of glass composition on the kinetics of glass etching and frosting in concentrated HF solutions. In: Journal of Non-Crystalline Solids, Vol. 499, p. 208-216 (2018). doi:10.1016/j.jnoncrysol.2018.07.030.
Grosshans, Holger ; Szasz, Robert_Zoltan ; Papalexandris, Miltiadis. Influence of the Rotor Configuration on the Electrostatic Charging of Helicopters. In: AIAA Journal : devoted to aerospace research and development, Vol. 56, no. 1, p. 368-375 (2018). doi:10.2514/I.J056242.
Minette, Florent ; Lugo-Pimentel, Michael ; Modroukas, Dean ; Davis, Andrew W. ; Gill, Rajinder ; Castaldi, Marco J. ; De Wilde, Juray. Intrinsic kinetics of steam methane reforming on a thin, nanostructured and adherent Ni coating. In: Applied Catalysis B: Environmental, Vol. 238, p. 184-197 (2018). doi:10.1016/j.apcatb.2018.07.015.
Duponcheel, Matthieu ; Leroi, Caroline ; Zeoli, Stephanie ; Winckelmans, Grégoire ; Bricteux, Laurent ; De Jaeger, Emmanuel ; Chatelain, Philippe. Investigation of the complete power conversion chain for small vertical- and horizontal-axis wind turbines in turbulent winds. In: Journal of Physics: Conference Series, Vol. 1037, no.1037, p. 072046 (2018). doi:10.1088/1742-6596/1037/7/072046.
Ren, Xueping ; Li, Shuxia ; Xiong, Zhiping. Isostatic diffusion bonding and post-solution treatment between Cr22Ni5Mo3MnSi and Cr30Ni7Mo3MnSi duplex stainless steels. In: Journal of Manufacturing Processes, Vol. 34, p. 215-224 (2018). doi:10.1016/j.jmapro.2018.06.010.
Sandu, Georgiana ; Coulombier, Michaël ; Kumar, Vishank ; Kassa, Hailu G. ; Avram, Ionel ; Ye, Ran ; Stopin, Antoine ; Bonifazi, Davide ; Gohy, Jean-François ; Leclère, Philippe ; Gonze, Xavier ; Pardoen, Thomas ; Vlad, Alexandru ; Melinte, Sorin. Kinked silicon nanowires-enabled interweaving electrode configuration for lithium-ion batteries. In: Scientific Reports, Vol. 8, p. 9794 (2018). doi:10.1038/s41598-018-28108-3.
van Sebille, Erik ; Griffies, Stephen M. ; Abernathey, Ryan ; Adams, Thomas P. ; Berloff, Pavel ; Biastoch, Arne ; Blanke, Bruno ; Chassignet, Eric P. ; Cheng, Yu ; Cotter, Colin J. ; Deleersnijder, Eric ; Döös, Kristofer ; Drake, Henri F. ; Drijfhout, Sybren ; Gary, Stefan F. ; Heemink, Arnold W. ; Kjellsson, Joakim ; Koszalka, Inga Monika ; Lange, Michael ; Lique, Camille ; MacGilchrist, Graeme A. ; Marsh, Robert ; Mayorga Adame, C. Gabriela ; McAdam, Ronan ; Nencioli, Francesco ; Paris, Claire B. ; Piggott, Matthew D. ; Polton, Jeff A. ; Rühs, Siren ; Shah, Syed H.A.M. ; Thomas, Matthew D. ; Wang, Jinbo ; Wolfram, Phillip J. ; Zanna, Laure ; Zika, Jan D.. Lagrangian ocean analysis: Fundamentals and practices. In: Ocean Modelling, Vol. 121, p. 49-75 (2018). doi:10.1016/j.ocemod.2017.11.008.
Khoddam, Shahin ; Tian, Liang ; Sapanathan, Thaneshan ; Hodgson, Peter D. ; Zarei-Hanzaki, Abbas. Latest Developments in Modeling and Characterization of Joining Metal Based Hybrid Materials. In: Advanced Engineering Materials, Vol. 20, no. 9, p. 1800048 (2018). doi:10.1002/adem.201800048.
Caprace, Denis-Gabriel ; Chatelain, Philippe ; Winckelmans, Grégoire. Lifting Line with Various Mollifications: Theory and Application to an Elliptical Wing. In: AIAA Journal, Vol. 57, no.1, p. 17-28 (2019). doi:10.2514/1.j057487.
Simar, Aude ; Mertens, Anne ; Ryelandt, Sophie ; Delannay, Francis ; Brassart, Laurence. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. In: Materials Science and Engineering: A, Vol. 723, p. 324-333 (2018). doi:10.1016/j.msea.2018.03.043.
Ruiz Salmon, Israel ; Luis Alconero, Patricia. Membrane crystallization via membrane distillation. In: Chemical Engineering and Processing: Process Intensification, Vol. 123, p. 258-271 (2018). doi:10.1016/j.cep.2017.11.017.
Rasouli, R. ; Towhata, I. ; Rattez, Hadrien ; Vonaesch, R.. Mitigation of nonuniform settlement of structures due to seismic liquefaction. In: Journal of Geotechnical and Geoenvironmental Engineering, Vol. 144, no. 11, p. 1-10 (2018). doi:10.1061/(ASCE)GT.1943-5606.0001974.
Delannay, Laurent. Modeling of microscopic strain heterogeneity during wire drawing of pearlite. In: Procedia Manufacturing, Vol. 15, p. 1893-1899 (2018). doi:10.1016/j.promfg.2018.07.199.
Joseph, Adermus ; Gonomy, Nyankona ; Zech, Yves ; Soares Frazao, Sandra. Modelling and analysis of the flood risk at Cavaillon City, Haiti. In: La Houille Blanche, Vol. 2018, no.2, p. 68-75 (2018). doi:10.1051/lhb/2018020.
Grigorev, Petr ; Zinovev, Aleksandr ; Terentyev, Dmitry ; Bonny, Giovanni ; Zhurkin, Evgeny E. ; Van Oost, Guido ; Noterdaeme, Jean-Marie. Molecular dynamics simulation of hydrogen and helium trapping in tungsten. In: Journal of Nuclear Materials, Vol. 508, no.-, p. 451-458 (2018). doi:10.1016/j.jnucmat.2018.05.052.
Rattez, Hadrien ; Stefanou, I. ; Sulem, J. ; Veveakis, M. ; Poulet, T.. Numerical Analysis of Strain Localization in Rocks with Thermo-hydro-mechanical Couplings Using Cosserat Continuum. In: Rock Mechanics and Rock Engineering, Vol. 51, no. 10, p. 3295-3311 (2018). doi:10.1007/s00603-018-1529-7.
de Chaunac, Henri ; Holeyman, Alain. Numerical analysis of the set-up around the shaft of a closed-ended pile driven in clay. In: Géotechnique, Vol. 68, no.4, p. 332-344 (2018). doi:10.1680/jgeot.16.p.229.
Lamberts, Olivier ; Chatelain, Philippe ; Bartosiewicz, Yann. Numerical and experimental evidence of the Fabri-choking in a supersonic ejector. In: International Journal of Heat and Fluid Flow, Vol. 69, p. 194-209 (2018). doi:10.1016/J.IJHEATFLUIDFLOW.2018.01.002.
Jimenez Mena, Norberto ; Jacques, Pascal ; Drezet, Jean-Marie ; Simar, Aude. On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 49, no. 7, p. 2692-2704 (2018). doi:10.1007/s11661-018-4618-z.
Wu, K. ; Contino, Francesco ; Yao, W. ; Fan, X.. On the application of tabulated dynamic adaptive chemistry in ethylene-fueled supersonic combustion. In: Combustion and Flame, Vol. 197, p. 265-275 (2018). doi:10.1016/j.combustflame.2018.08.012.
van der Rest, Camille ; Schmitz, Alain ; Jacques, Pascal. On the characterisation of antisite defects and ordering in off-stoichiometric Fe 2 VAl-based Heusler compounds by X-ray anomalous diffraction. In: Acta Materialia, Vol. 142, p. 193-200 (2018). doi:10.1016/j.actamat.2017.09.024.
Marot, Célestin ; Pellerin, Jeanne ; Remacle, Jean‐François. One machine, one minute, three billion tetrahedra. In: International Journal for Numerical Methods in Engineering, Vol. 117, no.9, p. 967-990 (2019). doi:10.1002/nme.5987.
Duisit, Jérôme ; Amiel, Hadrien ; Wüthrich, Tsering ; Taddeo, Adriano ; Dedriche, Adeline ; Destoop, Vincent ; Pardoen, Thomas ; Bouzin, Caroline ; Joris, Virginie ; Magee, Derek ; Vögelin, Esther ; Harriman, David ; Dessy, Chantal ; Orlando, Giuseppe ; Behets Wydemans, Catherine ; Rieben, Robert ; Gianello, Pierre ; Lengelé, Benoît. Perfusion-decellularization of human ear grafts enables ECM-based scaffolds for auricular vascularized composite tissue engineering.. In: Acta Biomaterialia, Vol. 73, p. 339-354 (2018). doi:10.1016/j.actbio.2018.04.009.
Terentyev, D. ; Riesch, J. ; Lebediev, S. ; Khvan, T. ; Zinovev, Aleksandr ; Rasiński, M. ; Dubinko, A. ; Coenen, J.W.. Plastic deformation of recrystallized tungsten-potassium wires: Constitutive deformation law in the temperature range 22–600 °C. In: International Journal of Refractory Metals and Hard Materials, Vol. 73, no., p. 38-45 (2018). doi:10.1016/j.ijrmhm.2018.01.012.
van Steenberghe, Mathieu ; Schubert, Thomas ; Gerelli, Sébastien ; Bouzin, Caroline ; Guiot, Yves ; Xhema, Daela ; Bollen, Xavier ; Abdelhamid, Karim ; Gianello, Pierre. Porcine pulmonary valve decellularization with NaOH-based vs detergent process: preliminary in vitro and in vivo assessments.. In: Journal of Cardiothoracic Surgery, Vol. 13, no. 1, p. 34 [1-12] (2018). doi:10.1186/s13019-018-0720-y.
Dias, Véronique ; Pochet, Maxime ; Limpens, Gauthier ; Giorgetti Simone ; De Paepe Ward ; Bram Svend ; Bricteux Laurent ; Verhelst Sebastian ; Parente Alessandro ; Contino Francesco ; Jeanmart, Hervé. Position Paper on Energy Transition. In: The Energy Industry Times, (2018).
Tipler, S. ; Parente, A. ; Coussement, A. ; Contino, Francesco ; Symoens, S.H. ; Djokic, M.R. ; Van Geem, K.M.. Prediction of the PIONA and oxygenate composition of unconventional fuels with the Pseudo-Component Property Estimation (PCPE) method. Application to an Automotive Shredder Residues-derived gasoline. In: 2018 SAE World Congress Experience, WCX 2018, Vol. 2018-April (2018). doi:10.4271/2018-01-0905.
Lopez-Covaleda, Edwin ; Ghodrat, Sepideh ; Kestens, Leo ; Sacre, Charles-Henry ; Pardoen, Thomas. Proposal of Characterization Procedure of Metal–Graphite Interface Strength in Compacted Graphite Iron. In: Materials, Vol. 11, no.7, p. 1159 (2018). doi:10.3390/ma11071159.
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. In: Acta Materialia, Vol. 148, p. 456-466 (2018). doi:10.1016/j.actamat.2018.02.003.
Guzzinati, Giulio ; Altantzis, Thomas ; Batuk, Maria ; De Backer, Annick ; Lumbeeck, Gunnar ; Samaee, Vahid ; Batuk, Dmitry ; Idrissi, Hosni ; Hadermann, Joke ; Van Aert, Sandra ; Schryvers, Dominique ; Verbeeck, Johan ; Bals, Sara. Recent Advances in Transmission Electron Microscopy for Materials Science at the EMAT Lab of the University of Antwerp. In: Materials, Vol. 11, no.8, p. 1304 (2018). doi:10.3390/ma11081304.
Miotti Bettanini, Alvise ; Hannard, Florent ; Jacques, Pascal ; Pardoen, Thomas ; Guilleume, Badinier ; Mithieux, Jean Denis ; Delannay, Laurent. Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 731, p. 495 - 505 (2018). doi:10.1016/j.msea.2018.06.012.
Sironval, Violaine ; Ryelandt, Laurence ; Chaurand, Perrine ; Ibouraadaten, Saloua ; Palmai-Pallag, Mihaly ; Yakoub, Yousof ; Ucakar, Bernard ; Rose, Jérôme ; Poleunis, Claude ; Vanbever, Rita ; Marbaix, Etienne ; Lison, Dominique ; Van Den Brûle, Sybille. Respiratory hazard of Li-ion battery components: elective toxicity of lithium cobalt oxide (LiCoO2) particles in a mouse bioassay. In: Archives of Toxicology, Vol. 92, no. 5, p. 1673-1684 (2018). doi:10.1007/s00204-018-2188-x.
Carlos Blandon ; Carlos Arteta ; Ricardo Bonett ; Julian Carrillo ; Saraiva Esteves Pacheco De Almeida, João. Response of thin lightly-reinforced concrete walls under cyclic loading. In: Engineering Structures, Vol. 176, no. 1, p. 175-187 (2018). doi:10.1016/j.engstruct.2018.08.089.
Huang, Meng ; Xu, Chao ; Fan, Guohua ; Maawad, Emad ; Gan, Weimin ; Geng, Lin ; Lin, Fengxiang ; Tang, Guangze ; Wu, Hao ; Du, Yan ; Li, Danyang ; Miao, Kesong ; Zhang, Tongtong ; Yang, Xuesong ; Xia, Yiping ; Cao, Guojian ; Kang, Huijun ; Wang, Tongmin ; Xiao, Tiqiao ; Xie, Honglan. Role of layered structure in ductility improvement of layered Ti-Al metal composite. In: Acta Materialia, Vol. 153, no.153, p. 235-249 (2018). doi:10.1016/j.actamat.2018.05.005.
Poddar, Shashi ; Pereira de Sa, Pedro Miguel ; Cai, Ronggang ; Delannay, Laurent ; Nysten, Bernard ; Piraux, Luc ; Jonas, Alain M.. Room-Temperature Magnetic Switching of the Electric Polarization in Ferroelectric Nanopillars. In: ACS Nano, Vol. 12, p. 576-584 (2018). doi:10.1021/acsnano.7b07389.
Lipková, Jana ; Arampatzis, Georgios ; Chatelain, Philippe ; Menze, Bjoern ; Koumoutsakos, Petros. S-Leaping: an adaptive, accelerated stochastic simulation algorithm, bridging τ-leaping and R-leaping $$\tau $$ τ -Leaping and R-Leaping. In: Bulletin of Mathematical Biology, Vol. 81, no.8, p. 3074-3096 (2018). doi:10.1007/s11538-018-0464-9.
Salmón, I. Ruiz ; Simon, K. ; Clérin, C. ; Luis Alconero, Patricia. Salt Recovery from Wastewater Using Membrane Distillation–Crystallization. In: Crystal Growth & Design, Vol. 18, no. 12, p. 7275-7285 (2018). doi:10.1021/acs.cgd.8b00580.
Kerckhofs, Greet ; Stegen, Steve ; Van Gastel, Nick ; Sap, Annelies ; Falgayrac, Guillaume ; Penel, Guillaume ; Durand, Marjorie ; Luyten, Frank ; Geris, Liesbet ; Vandamme, Katleen ; Parac-Vogt, Tatjana ; Carmeliet, Geert. Simultaneous three-dimensional visualization of mineralized and soft skeletal tissues by a novel microCT contrast agent with polyoxometalate structure. In: Biomaterials, Vol. 159, no.-, p. 1-12 (2018). doi:10.1016/j.biomaterials.2017.12.016.
Li, Wenqi ; Francesco Galiano ; Julien Estager ; Jean-Christophe Monbaliu ; Debecker, Damien P. ; Alberto Figoli ; Luis Alconero, Patricia. Sorption and pervaporation study of methanol/dimethyl carbonate mixture with poly(etheretherketone) (PEEK-WC) membrane. In: Journal of Membrane Science, Vol. 567, p. 303-310 (2018). doi:10.1016/j.memsci.2018.09.040.
Abraham, S. ; Tsirikoglou, P. ; Miranda, J. ; Lacor, C. ; Contino, Francesco ; Ghorbaniasl, G.. Spectral representation of stochastic field data using sparse polynomial chaos expansions. In: Journal of Computational Physics: X, Vol. 367, p. 109-120 (2018). doi:10.1016/j.jcp.2018.04.025.
Ratan, Sanjiv ; De Wilde, Juray. Structured catalyst for steam reforming. A catalyst system for steam methane reforming for improved heat transfer, pressure drop and catalyst effectiveness. In: ePTQ.COM, Vol. Q3, p. 111-113 (2018).
Yin, Chao ; Terentyev, Dmitry ; Pardoen, Thomas ; Bakaeva, Anastasiia ; Petrov, Roumen ; Antusch, Steffen ; Rieth, Michael ; Vilémová, Monika ; Matějíček, Jiří ; Zhang, Tao. Tensile properties of baseline and advanced tungsten grades for fusion applications. In: International Journal of Refractory Metals and Hard Materials, Vol. 75, p. 153-162 (2018). doi:10.1016/j.ijrmhm.2018.04.003.
Lamberts, Olivier ; Chatelain, Philippe ; Bourgeois, Nicolas ; Bartosiewicz, Yann. The compound-choking theory as an explanation of the entrainment limitation in supersonic ejectors. In: Energy, Vol. 158, p. 524-536 (2018). doi:10.1016/j.energy.2018.06.036.
Beekman, Kerensa M. ; Veldhuis-Vlug, Annegreet G. ; van der Veen, Albert ; den Heijer, Martin ; Maas, Mario ; Kerckhofs, Greet ; Parac-Vogt, Tatjana N. ; Bisschop, Peter H ; Bravenboer, Nathalie. The effect of PPARγ inhibition on bone marrow adipose tissue and bone in C3H/HeJ mice.. In: American Journal of Physiology-Endocrinology and Metabolism, Vol. 316, no. 1, p. E96-E105 (2019). doi:10.1152/ajpendo.00265.2018.
Marin, Carlos ; Luyten, Frank ; Van Der Schueren, Bart ; Kerckhofs, Greet ; Vandamme, Katleen. The impact of type 2 diabetes on bone fracture healing. In: Frontiers in Endocrinology, Vol. 9, no. 6 (2018). doi:10.3389/fendo.2018.00006.
Rattez, H. ; Stefanou, I. ; Sulem, J.. The importance of Thermo-Hydro-Mechanical couplings and microstructure to strain localization in 3D continua with application to seismic faults. Part I: Theory and linear stability analysis. In: Journal of the Mechanics and Physics of Solids, Vol. 115, no.-, p. 54-76 (2018). doi:10.1016/j.jmps.2018.03.004.
Rattez, Hadrien ; Stefanou, I. ; Sulem, J. ; Veveakis, M. ; Poulet, T.. The importance of Thermo-Hydro-Mechanical couplings and microstructure to strain localization in 3D continua with application to seismic faults. Part II: Numerical implementation and post-bifurcation analysis. In: Journal of the Mechanics and Physics of Solids, Vol. 115, p. 1-29 (2018). doi:10.1016/j.jmps.2018.03.003.
Pellerin, Jeanne ; Verhetsel, Kilian ; Remacle, Jean-François. There are 174 subdivisions of the hexahedron into tetrahedra. In: ACM Transactions on Graphics, Vol. 37, no. 6 (2018) (2018). doi:10.1145/3272127.3275037.
Monsorno, Davide ; Dimas, Athanassios ; Papalexandris, Miltiadis. Time-accurate calculation of two-phase granular flows exhibiting compaction, dilatancy and nonlinear rheology. In: Journal of Computational Physics, Vol. 372, p. 799-822 (2018). doi:10.1016/j.jcp.2018.06.061.
Heins, Sophie ; Flynn, Louis ; Geeroms, Joost ; Lefeber, Dirk ; Ronsse, Renaud. Torque control of an active elastic transfemoral prosthesis via quasi-static modelling. In: Robotics and Autonomous Systems, Vol. 107, p. 100-115 (2018). doi:10.1016/j.robot.2018.05.015.
De Paepe, W. ; Carrero, M.M. ; Bram, S. ; Parente, A. ; Contino, Francesco. Toward higher micro gas turbine efficiency and flexibility-humidified micro gas turbines: A review. In: Journal of Engineering for Gas Turbines and Power, Vol. 140, no.8 (2018). doi:10.1115/1.4038365.
Delannay, Francis ; Brassart, Laurence. Transient and asymptotic kinetics of mass transfer by coupled surface and grain boundary diffusion in sintering under strain rate control. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, Vol. 474, no.2217, p. 20180104 (2018). doi:10.1098/rspa.2018.0104.
Lin, Fengxiang ; Marteleur, Matthieu ; Jacques, Pascal ; Delannay, Laurent. Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. In: International Journal of Plasticity, Vol. 105, p. 195-210 (2018). doi:10.1016/j.ijplas.2018.02.012.
Li, Yanfang ; Wolanski, Eric ; Dai, Zhenfei ; Lambrechts, Jonathan ; Tang, Cheng ; Zhang, Hua. Trapping of plastics in semi-enclosed seas: Insights from the Bohai Sea, China. In: Marine Pollution Bulletin, Vol. 137, p. 509-517 (2018). doi:10.1016/j.marpolbul.2018.10.038.
Schrooyen, Pierre ; Turchi, Alessandro ; Hillewaert, Koen ; Chatelain, Philippe ; Magin, Thierry E.. Two-way coupled simulations of stagnation-point ablation with transient material response. In: International Journal of Thermal Sciences, Vol. 134, p. 639-652 (2018). doi:10.1016/j.ijthermalsci.2018.08.014.
Ricks, N. ; Abraham, S. ; Contino, Francesco ; Ghorbaniasl, G.. Uncertainty quantification for the aeroacoustics of rotating blades in the time domain. In: Applied Accoustic, Vol. 139, p. 57-68 (2018). doi:10.1016/j.apacoust.2018.04.012.
Li, Wenqi ; Luis Alconero, Patricia. Understanding coupling effects in pervaporation of multi-component mixtures. In: Separation and Purification Technology, Vol. 197, no. 1, p. 95-106 (2018). doi:10.1016/j.seppur.2017.12.041.
Marin, Carlos ; Papantonakis, Georgios ; Sels, Kathleen ; van Lenthe, G Harry ; Falgayrac, Guillaume ; Vangoitsenhoven, Roman ; Van der Schueren, Bart ; Penel, Guillaume ; Luyten, Frank ; Vandamme, Katleen ; Kerckhofs, Greet. Unraveling the compromised biomechanical performance of type 2 diabetes- and Roux-en-Y gastric bypass bone by linking mechanical-structural and physico-chemical properties.. In: Scientific Reports, Vol. 8, no.1, p. 5881 (2018). doi:10.1038/s41598-018-24229-x.
Chevalier, Jérémy ; Brassart, Laurence ; Lani, Frédéric ; Bailly, Christian ; Pardoen, Thomas ; Morelle, Xavier. Unveiling the nanoscale heterogeneity controlled deformation of thermosets. In: Journal of the Mechanics and Physics of Solids, Vol. 121, no.1, p. 432-446 (2018). doi:10.1016/j.jmps.2018.08.014.
Dadi, D. ; Beyene, A. ; Simoens, K. ; Soares, J. ; Demeke, M. M. ; Thevelein, J. M. ; Bernaerts, K. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Valorization of coffee byproducts for bioethanol production using lignocellulosic yeast fermentation and pervaporation. In: International Journal of Environmental Science and Technology, Vol. 15, p. 821-832 (2018). doi:10.1007/s13762-017-1440-x.
Schlaefer, Jodie A. ; Wolanski, Eric ; Lambrechts, Jonathan ; Kingsford, Michael J.. Wind Conditions on the Great Barrier Reef Influenced the Recruitment of Snapper (Lutjanus carponotatus). In: Frontiers in Marine Science, Vol. 5, no.193, p. 1-20 (2018). doi:10.3389/fmars.2018.00193.
Fang, Yu ; De Lorenzo, Marco ; Lafon, Philippe ; Poncet, Sébastien ; Bartosiewicz, Yann. an accurate and efficient look-up table equation of state for two-phase compressible flow simulations of carbon dioxide. In: Industrial & Engineering Chemistry Research, , no.57, p. 7676-7691 (2018). doi:10.1021/acs.iecr.8b00507.
Provided by DIAL