Publications by author

IMMC

Laurent Delannay

Publications


Journal Articles


1. Lin, Fengxiang; Delannay, Laurent. Non-uniform grain boundary migration during static recrystallization: A cellular automaton study. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, (2022). (Accepté/Sous presse). http://hdl.handle.net/2078.1/256582

2. Zinovev, Aleksandr; Terentyev, Dmitry; Delannay, Laurent. Plastic deformation of ITER specification tungsten: Temperature and strain rate dependent constitutive law deduced by inverse finite element analysis. In: International Journal of Refractory Metals and Hard Materials, Vol. 96, p. 105481 (2021). doi:10.1016/j.ijrmhm.2021.105481. http://hdl.handle.net/2078.1/242089

3. Zinovev, Aleksandr; Terentyev, Dmitry; Delannay, Laurent. Modelling strain hardening during cyclic thermal shock tests of tungsten. In: Journal of Nuclear Materials, Vol. 546, p. 152776 (2021). doi:10.1016/j.jnucmat.2020.152776. http://hdl.handle.net/2078.1/241670

4. Muszka, Krzysztof; Wang, Jiangting; Madej, Lukasz; Tkocz, Marek; Delannay, Laurent; Szyndler, Joanna; Grosman, Franciszek. Through scale material flow investigation in novel incremental bulk forming process. In: Journal of Materials Processing Technology, Vol. 287, p. 116487 (2021). doi:10.1016/j.jmatprotec.2019.116487. http://hdl.handle.net/2078.1/236676

5. Liu, Pei; Lin, Fengxiang; Shin, Kwang Seon; Liu, Hong; Moelans, Nele; Delannay, Laurent; Peng, Liming; Nie, Jian-Feng; Yue, Yuan. Variant selection of primary–secondary extension twin pairs in magnesium: An analytical calculation study. In: Acta Materialia, Vol. 219, p. 117221 (2021). doi:10.1016/j.actamat.2021.117221. http://hdl.handle.net/2078.1/250810

6. Lin, Fengxiang; Shi, Qiwei; Delannay, Laurent. Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals. In: International Journal of Solids and Structures, Vol. 184, p. 167-177 (2020). doi:10.1016/j.ijsolstr.2019.01.024. http://hdl.handle.net/2078.1/213885

7. Ding, Lipeng; Idrissi, Hosni; Schryvers, Dominique; Mithieux, Jean-Denis; Parrens, Coralie; Jacques, Pascal; Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise. Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel. In: Materials & Design, Vol. 162, p. 362 - 374 (2019). doi:10.1016/j.matdes.2018.12.005; 10.1016/j.matdes.2018.12.005. http://hdl.handle.net/2078.1/208252

8. Coulombier, Michaël; Lemoine, Guerric; Pardoen, Thomas; Delannay, Laurent. Modelling creep induced by internal stresses in freestanding submicron Cu film. In: IOP Conference Series: Materials Science and Engineering, Vol. 580, p. 012003 (2019). doi:10.1088/1757-899x/580/1/012003. http://hdl.handle.net/2078.1/224243

9. Guilleume, Badinier; Jacques, Pascal; Pardoen, Thomas; Hannard, Florent; Mithieux, Jean Denis; Delannay, Laurent; Miotti Bettanini, Alvise. Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 731, p. 495 - 505 (2018). doi:10.1016/j.msea.2018.06.012. http://hdl.handle.net/2078.1/200086

10. Lin, Fengxiang; Jacques, Pascal; Delannay, Laurent; Marteleur, Matthieu. Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. In: International Journal of Plasticity, Vol. 105, p. 195-210 (2018). doi:10.1016/j.ijplas.2018.02.012. http://hdl.handle.net/2078.1/194357

11. Delannay, Laurent. Modeling of microscopic strain heterogeneity during wire drawing of pearlite. In: Procedia Manufacturing, Vol. 15, p. 1893-1899 (2018). doi:10.1016/j.promfg.2018.07.199. http://hdl.handle.net/2078.1/201595

12. Poddar, Shashi; Jonas, Alain M.; Piraux, Luc; Cai, Ronggang; Nysten, Bernard; Pereira de Sa, Pedro Miguel; Delannay, Laurent. Room-Temperature Magnetic Switching of the Electric Polarization in Ferroelectric Nanopillars. In: ACS Nano, Vol. 12, p. 576-584 (2018). doi:10.1021/acsnano.7b07389. http://hdl.handle.net/2078.1/194235

13. Mithieux, Jean-Denis; Jacques, Pascal; Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise; Badinier, Guillaume. Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel. In: AIP Conference Proceedings, Vol. 1896, p. 020010 (2017). doi:10.1063/1.5007967. http://hdl.handle.net/2078.1/188433

14. Zinovev, Aleksandr; Dubinko, Andrii; Terentyev, Dmitry; Delannay, Laurent. Constitutive law for thermally-activated plasticity of recrystallized tungsten. In: Journal of Nuclear Materials, Vol. 496, p. 325-332 (2017). doi:10.1016/j.jnucmat.2017.09.044. http://hdl.handle.net/2078.1/188353

15. Zinovev, Aleksandr; Terentyev, D; Delannay, Laurent. Finite element analysis of heat load of tungsten relevant to ITER conditions. In: Physica Scripta : an international journal for experimental and theoretical physics, Vol. T170, p. 014002 (2017). doi:10.1088/0031-8949/2017/T170/014002. http://hdl.handle.net/2078.1/187427

16. Lin, Fengxiang; Jacques, Pascal; Delannay, Laurent; Alkorta, Jon; Marteleur, Matthieu. Local stress field induced by twinning in a metastable beta-titanium alloy. In: IOP Conference Series: Materials Science and Engineering, Vol. 219, p. 012031 (2017). doi:10.1088/1757-899X/219/1/012031. http://hdl.handle.net/2078.1/188529

17. Yan, Peng; Delannay, Laurent; Kowalski, Nicolas; Remacle, Jean-François. Finite element modeling of periodic polycrystalline aggregates with intergranular cracks. In: International Journal of Solids and Structures, Vol. 90, p. 60-68 (2016). doi:10.1016/j.ijsolstr.2016.04.010. http://hdl.handle.net/2078.1/173959

18. dancette, sylvain; Amodeo, Jonathan; Delannay, Laurent. Atomistically-informed crystal plasticity in MgO polycrystals under pressure. In: International Journal of Plasticity, Vol. 82, p. 177-191 (2016). http://hdl.handle.net/2078.1/169604

19. Payne, J.F.B.; Delannay, Laurent; Yan, P.; Tzelepi, A. Micromechanistic modelling of the polycrystalline response of graphite under temperature changes and irradiation. In: Carbon, Vol. 96, p. 827-835 (2016). doi:10.1016/j.carbon.2015.10.019. http://hdl.handle.net/2078.1/165955

20. Pardoen, Thomas; Lemoine, Guerric; Colla, Marie-Stéphane; Delannay, Laurent; Idrissi, Hosni. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. In: Acta Materialia, Vol. 111, p. 10-21 (2016). doi:10.1016/j.actamat.2016.03.038. http://hdl.handle.net/2078.1/173058

21. Dancette, Sylvain; Martin, Guilhem; Delannay, Laurent; Willemet, Marie; Browet, Arnaud. Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries. In: Modelling and Simulation in Materials Science and Engineering, Vol. 24, no. 055014, p. 1-14 (2016). doi:10.1088/0965-0393/24/5/055014. http://hdl.handle.net/2078.1/169605

22. Kammoun, Slim; Delannay, Laurent; Brassart, Laurence; Doghri, Issam. Micromechanical modeling of the progressive failure in short glass–fiber reinforced thermoplastics – First Pseudo-Grain Damage model. In: Composites Part A: Applied Science and Manufacturing, Vol. 73, p. 166-175 (2015). doi:10.1016/j.compositesa.2015.02.017. http://hdl.handle.net/2078.1/157852

23. Tzelepi, N.; Yan, Peng; Payne, J.F.B.; Delannay, Laurent. Predictions of inter-granular cracking and dimensional changes of irradiated polycrystalline graphite under plane strain. In: Computational Materials Science, Vol. 87, p. 129-137 (2014). doi:10.1016/j.commatsci.2014.02.008. http://hdl.handle.net/2078.1/141250

24. Mishin, Oleg V.; Delannay, Laurent. Crystal Plasticity Modeling of the Through-Thickness Texture Heterogeneity in Heavily Rolled Aluminum. In: Key Engineering Materials, Vol. 554-557, p. 1189-1194 (2013). doi:10.4028/www.scientific.net/KEM.554-557.1189. http://hdl.handle.net/2078.1/139746

25. Miled, B.; Delannay, Laurent; Brassart, Laurence; Doghri, Issam. Micromechanical modeling of coupled viscoelastic–viscoplastic composites based on an incrementally affine formulation. In: International Journal of Solids and Structures, Vol. 50, no. 10, p. 1755-1769 (2013). doi:10.1016/j.ijsolstr.2013.02.004. http://hdl.handle.net/2078.1/128862

26. Bréchet, Y.; Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Mithieux, J.D.; Martin, G.; Delannay, Laurent. Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems. In: Engineering Fracture Mechanics, Vol. 102, p. 77-100 (2013). doi:10.1016/j.engfracmech.2013.02.028. http://hdl.handle.net/2078.1/128865

27. Delannay, Laurent; Stainier, Laurent; Brassart, Laurence; Doghri, Issam. Homogenization of elasto-(visco) plastic composites based on an incremental variational principle. In: International Journal of Plasticity, Vol. 36, p. 86-112 (sepembre 2012). doi:10.1016/j.ijplas.2012.03.010. http://hdl.handle.net/2078.1/111694

28. Mithieux, Jean-Denis; Pardoen, Thomas; Bréchet, Yves; Delannay, Laurent; Véron , Muriel; Martin, Guilhem; Chéhab, Béchir; Kumar Yerra, Sampath. A Macro- and micromechanics investigation of hot cracking in duplex steels. In: Acta Materialia, Vol. 60, no. 11, p. 4646-4660 (June 2012). doi:10.1016/j.actamat.2012.03.040. http://hdl.handle.net/2078.1/112074

29. Dancette, Sylvain; Melchior, Maxime; Renard, Krystel; Delannay, Laurent; Jacques, Pascal. Crystal plasticity modeling of texture development and hardening in TWIP steels. In: Acta Materialia, Vol. 60, no. 5, p. 2135-2145 (March 2012). doi:10.1016/j.actamat.2012.01.015. http://hdl.handle.net/2078.1/108984

30. Barnett, M.R.; Delannay, Laurent. Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals. In: International Journal of Plasticity, Vol. 32-33, p. 70-84 (2012). doi:10.1016/j.ijplas.2011.12.002. http://hdl.handle.net/2078.1/108990

31. Delannay, Laurent; Eyckens, Philip. Validation of the texture-based ALAMEL and VPSC models by measured anisotropy of plastic yielding. In: Materials Science Forum, Vol. 702-703, p. 233-236 (2012). doi:10.4028/www.scientific.net/MSF.702-703.233. http://hdl.handle.net/2078.1/95561

32. Delannay, Laurent. Prediction of the plastic anisotropy of rolled sheets under a combined effect of texture, grain shape and grain size. In: Materials Science Forum, Vol. 702-703, p. 182-187 (2012). doi:10.4028/www.scientific.net/MSF.702-703.182. http://hdl.handle.net/2078.1/95557

33. Dobrzynski, Cecile; Delannay, Laurent; Melchior, Maxime; Remacle, Jean-Francois. A mesh adaptation procedure for periodic domains. In: International journal for numerical methods in engineering, Vol. 86, no. 12, p. 1396-1412 (2011). doi:10.1002/nme.3106. http://hdl.handle.net/2078.1/79078

34. Fourmentin, R.; Chéhab, B.; Yerra Sampath, Kumar; Véron, Muriel; Pardoen, Thomas; Mithieux, J.D.; Delannay, Laurent; Martin, Guilhem; Bréchet, Yves. Duplex Stainless Steel Microstructural Developments as Model Microstructures for Hot Ductility Investigations. In: Solid State Phenomena, Vol. 172-174, no. -, p. 350-355 (2011). doi:10.4028/www.scientific.net/SSP.172-174.350. http://hdl.handle.net/2078.1/78538

35. Kanjarla, Anand Krishna; Delannay, Laurent; Van Houtte, Paul. Finite Element Study of Intragrain Plastic Heterogeneity near a Triple Junction. In: Metallurgical and materials transactions a-physical metallurgy andmaterials science, Vol. 42A, no. 3, p. 660-668 (2011). doi:10.1007/s11661-010-0455-4. http://hdl.handle.net/2078.1/79077

36. Delannay, Laurent; Othmani, Yamen; Doghri, Issam. Equivalent inclusion solution adapted to particle debonding with a non-linear cohesive law. In: International Journal of Solids and Structures, Vol. 48, no. 24, p. 3326-3335 (December 2011). doi:10.1016/j.ijsolstr.2011.08.002. http://hdl.handle.net/2078.1/91860

37. Doghri, Issam; Delannay, Laurent; Stainier, Laurent; Brassart, Laurence. A variational formulation for the incremental homogenization of elasto-plastic composites. In: Journal of the Mechanics and Physics of Solids, Vol. 59, no. 12, p. 2455-2475 (December 2011). doi:10.1016/j.jmps.2011.09.004. http://hdl.handle.net/2078.1/91861

38. Dancette, Sylvain; Melchior, Maxime; Renard, Krystel; Delannay, Laurent; Jacques, Pascal. Strain heterogeneity and local anisotropy in TWIP steels. In: AIP Conference Proceedings, Vol. 1353, p. 145-150 (2011). doi:10.1063/1.3589506. http://hdl.handle.net/2078.1/79075

39. Adam, Laurent; Kammoun, Slim; Delannay, Laurent; Robert, Gilles; Doghri, Issam. First pseudo-grain failure model for inelastic composites with misaligned short fibers. In: Composites Part A: Applied Science and Manufacturing, Vol. 42, no. 12, p. 1892-1902 (December 2011). doi:10.1016/j.compositesa.2011.08.013. http://hdl.handle.net/2078.1/91859

40. Samajdar, I.; Mishra, S.; Mishra, S. K.; Paranjape, H.; Vanhoutte, P.; Kanjarla, A. K.; Delannay, Laurent; Raveendra, S. Strain Mode Dependence of Deformation Texture Developments: Microstructural Origin. In: Metallurgical and materials transactions a-physical metallurgy andmaterials science, Vol. 42A, no. 7, p. 2113-2124 (2011). doi:10.1007/s11661-010-0580-0. http://hdl.handle.net/2078.1/79069

41. Delannay, Laurent; Miled, Bilel; Doghri, Issam. Coupled viscoelastic–viscoplastic modeling of homogeneous and isotropic polymers: Numerical algorithm and analytical solutions. In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, no. 47-48, p. 3381-3394 (November 2011). doi:10.1016/j.cma.2011.08.015. http://hdl.handle.net/2078.1/91862

42. Scheyvaerts, Florence; Yerra Sampath, Kumar; Pardoen, Thomas; Van Houtte, Paul; Tekoglu, C.; Delannay, Laurent. Void growth and coalescence in single crystals. In: International Journal of Solids and Structures, Vol. 47, no. 7-8, p. 1016-1029 (2010). doi:10.1016/j.ijsolstr.2009.12.019. http://hdl.handle.net/2078.1/34025

43. Kanjarla, Anand Krishna; Delannay, Laurent; Van Houtte, Paul. Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method. In: International Journal of Plasticity, Vol. 26, no. 8, p. 1220-1233 (2010). doi:10.1016/j.ijplas.2009.05.005. http://hdl.handle.net/2078.1/34621

44. Delannay, Laurent; Brassart, Laurence; Doghri, Issam. Homogenization of elasto-plastic composites coupled with a nonlinear finite element analysis of the equivalent inclusion problem. In: International Journal of Solids and Structures, Vol. 47, no. 5, p. 716-729 (2010). doi:10.1016/j.ijsolstr.2009.11.013. http://hdl.handle.net/2078.1/34187

45. Signorelli, J. W.; Melchior, Maxime; Delannay, Laurent; Remacle, Jean-François; Kuwabara, T. Influence of grain shape on the planar anisotropy of rolled steel sheets - evaluation of three models. In: Computational materials science, Vol. 45, no. 3, p. 739-743 (2009). doi:10.1016/j.commatsci.2008.06.013. http://hdl.handle.net/2078.1/79351

46. Dancette, S.; Delannay, Laurent; Jodlowski, T.; Giovanola, J. Multisite model prediction of texture induced anisotropy in brass. In: International Journal of Material Forming, Vol. 3, no. SUPPL. 1, p. 251-254 (2010). doi:10.1007/s12289-010-0754-8. http://hdl.handle.net/2078.1/163740

47. Delannay, Laurent; Pierman, Anne-Pascale; Jacques, Pascal. Assessment of a Micro-Macro Modeling of the Bending and Unbending of Multiphase Steel Sheets. In: Advanced Engineering Materials, Vol. 11, no. 3, p. 148-152 (2009). doi:10.1002/adem.200800288. http://hdl.handle.net/2078.1/35698

48. Geubelle, P. H.; Delannay, Laurent; Inglis, H. M.; Brassart, Laurence; Doghri, Issam. An extended Mori-Tanaka homogenization scheme for finite strain modeling of debonding in particle-reinforced elastomers. In: Computational Materials Science, Vol. 45, no. 3, p. 611-616 (2009). doi:10.1016/j.commatsci.2008.06.021. http://hdl.handle.net/2078.1/58959

49. Coupez, T.; Resk, Heba; Bernacki, M.; Delannay, Laurent; Loge, R. Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations. In: Modelling and Simulation in Materials Science and Engineering, Vol. 17, no. 7 (2009). doi:10.1088/0965-0393/17/7/075012. http://hdl.handle.net/2078.1/35292

50. Bernacki, M.; Digonnet, H.; Loge, R.; Delannay, Laurent; Coupez, T.; Resk, Heba; Chastel, Y. Linking plastic deformation to recrystallization in metals using digital microstructures. In: Philosophical Magazine (London, 2003), Vol. 88, no. 30-32, p. 3691-3712 (2008). doi:10.1080/14786430802502575. http://hdl.handle.net/2078.1/66166

51. Melchior, Maxime; Delannay, Laurent; Jacques, Pascal. Effect of Twinning and Grain Interaction On Texture Development in Rolled Twip Steel. In: Steel Research International, p. 153-159 (2008). http://hdl.handle.net/2078.1/58922

52. Pardoen, Thomas; Delannay, Laurent; Jacques, Pascal. Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. In: International Journal of Solids and Structures, Vol. 45, no. 6, p. 1825-1843 (2008). doi:10.1016/j.ijsolstr.2007.10.026. http://hdl.handle.net/2078.1/36776

53. Pierard, O.; Delannay, Laurent; Doghri, Issam. Prediction of tension-compression cycles in multiphase steel using a modified incremental mean-field model. In: International Journal of Solids and Structures, Vol. 44, no. 22-23, p. 7291-7306 (2007). doi:10.1016/j.ijsolstr.2007.04.013. http://hdl.handle.net/2078.1/37211

54. Chastel, Y.; Delannay, Laurent; Beringhier, M.; Loge, R. Using Lagrangian particles to efficiently describe microstructure evolution in metal forming - application to texture-induced mechanical anisotropy. In: Modelling and Simulation in Materials Science and Engineering, Vol. 15, no. 3, p. 191-204 (2007). doi:10.1088/0965-0393/15/3/001. http://hdl.handle.net/2078.1/37676

55. Delannay, Francis; Delannay, Laurent; Ryelandt, Sophie; Van Acker, Karel; Persoons, Rosita. Measurement of the debonding resistance of strongly adherent thick coatings on metals via in-plane tensile straining. In: Advanced Engineering Materials, Vol. 9, no. 5, p. 406-412 (2007). doi:10.1002/adem.200700014. http://hdl.handle.net/2078.1/37532

56. Melchior, Maxime; Delannay, Laurent. A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size. In: Computational Materials Science, Vol. 37, no. 4, p. 557-564 (2006). doi:10.1016/j.commatsci.2005.12.002. http://hdl.handle.net/2078.1/38239

57. Lani, Frédéric; Pardoen, Thomas; Delannay, Francis; Delannay, Laurent. Mean field modelling of the plastic behaviour of co-continuous dual-phase alloys with strong morphological anisotropy. In: International Journal of Plasticity, Vol. 22, no. 12, p. 2327-2345 (2006). doi:10.1016/j.ijplas.2006.03.009. http://hdl.handle.net/2078.1/38236

58. Kalidindi, Surya R.; Delannay, Laurent; Jacques, Pascal. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. In: International Journal of Plasticity, Vol. 22, no. 10, p. 1879-1898 (2006). doi:10.1016/j.ijplas.2006.01.008. http://hdl.handle.net/2078.1/38364

59. Melchior, Maxime; Delannay, Laurent; Van Houtte, Paul; Jacques, Pascal. Simulation of the lattice strains developed during a tensile test on a multiphase steel. In: Materials Science Forum, Vol. 495-497, p. 1627-1632 (2005). http://hdl.handle.net/2078.1/60915

60. Loge, R.E.; Chastel, Y.; Delannay, Laurent; Signorelli, J.W.; Van Houtte, Paul. Measurement of in-grain orientation gradients by EBSD and comparison with finite element results. In: Advanced Engineering Materials, Vol. 5, no. 8, p. 597-600 (2003). doi:10.1002/adem.200300376. http://hdl.handle.net/2078.1/40832

61. Kalidindi, S.R.; Delannay, Laurent; Van Houtte, Paul. Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction. In: International Journal of Plasticity, Vol. 18, no. 3, p. 359-377 (2002). doi:10.1016/S0749-6419(00)00102-9. http://hdl.handle.net/2078.1/155858

62. Kalidindi, S.R.; Delannay, Laurent; Van Houtte, Paul. Quantitative prediction of textures in aluminium cold rolled to moderate strains. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 336, no. 1-2, p. 233-244 (2002). doi:10.1016/S0921-5093(01)01966-9. http://hdl.handle.net/2078.1/155860

63. Delannay, Laurent. Prediction of intergranular strains in cubic metals using a multisite elastic-plastic model. In: Acta Materialia, Vol. 50, no.20, p. 5127-5138 (2002). doi:10.1016/S1359-6454(02)00369-5. http://hdl.handle.net/2078.1/155862

64. Delannay, Laurent; Van Houtte, Paul; Liu, Y.S. Application of the Lamel model for simulating cold rolling texture in molybdenum sheet. In: Acta Materialia, Vol. 50, no.7, p. 1849-1856 (2002). doi:10.1016/S1359-6454(02)00037-X. http://hdl.handle.net/2078.1/155866

65. Aernoudt, E; Delannay, Laurent; Peeters, B; Seefeldt, M; Van Houtte, Paul. Modelling the initial stage of grain subdivision with the help of a coupled substructure and texture evolution algorithm. In: Acta Materialia, Vol. 49, no.12, p. 2129-2143 (2001). doi:10.1016/S1359-6454(01)00126-4. http://hdl.handle.net/2078.1/155861

66. Mishin, O.V; Delannay, Laurent; Van Houtte, Paul; Jensen, D.Juu. Quantitative analysis of grain subdivision in cold rolled aluminium. In: Acta Materialia, Vol. 49, no. 13, p. 2441-2451 (2001). doi:10.1016/S1359-6454(01)00150-1. http://hdl.handle.net/2078.1/155859

67. Kalidindi, S.R; Delannay, Laurent; Peeters, B; Seefeldt, M; Van Houtte, Paul. A disclination-based model for grain subdivision. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 319-321, p. 192-196 (2001). doi:10.1016/S0921-5093(01)00994-7. http://hdl.handle.net/2078.1/155863

68. Delannay, Laurent; Houtte, P Van; Vanderschueren, D; Bael, A Van. Application of a texture parameter model to study planar anisotropy of rolled steel sheets. In: Modelling and Simulation in Materials Science and Engineering, Vol. 8, no.4, p. 413-422 (2000). doi:10.1088/0965-0393/8/4/301. http://hdl.handle.net/2078.1/155864


Conference Papers


1. Croonenborghs, Maïté; Pardoen, Thomas; Korsunsky, AM; Laville, Colin; Delannay, Laurent; Ismail, Karim; Everaerts, J. Influence du pliage sur la resistance en fatigue des tiges de croissance. 2020 xxx. http://hdl.handle.net/2078.1/226259

2. Lecarme, Liza; Brassart, Laurence; Perlade, Astrid; Simar, Aude; Maire, Eric; Mithieux, Jean-Denis; Pardoen, Thomas; Ismail, Karim; Hannard, Florent; Delannay, Laurent; Jacques, Pascal; Miotti Bettanini, Alvise. Microstructure heterogeneity dominated ductile fracture. 2019 xxx. http://hdl.handle.net/2078.1/226323

3. Jacques, Pascal; Parrens, Coralie; Mithieux, Jean-Denis; Pardoen, Thomas; Laville, Colin; Delannay, Laurent; Miotti Bettanini, Alvise. Ductile to brittle failure transition under bending deformation of martensitic stainless steels. 2018 xxx. http://hdl.handle.net/2078.1/214430

4. Mithieux, Jean-Denis; Jacques, Pascal; Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise; Badinier, Guillaume. Influence Of Microscopic Strain Heterogeneity On The Formability Of Martensitic Stainless Steel. In: Proceedings of ESAFORM, 2017 xxx. http://hdl.handle.net/2078.1/226630

5. Szyndler, Joanna; Muszka, Krzysztof; Delannay, Laurent; Madej, Lukasz. Numerical and experimental microscale analysis of the incremental forming process. In: AIP Conference Proceedings. Vol. 1896, p. 080006 (2017). 2017 xxx. doi:10.1063/1.5008086. http://hdl.handle.net/2078.1/188434

6. Idrissi, Hosni; Tummala, Hareesh; Pardoen, Thomas; Fivel, Marc; Hammad, Mohamed; Delannay, Laurent. 3D DD Investigations of the Role of Interfaces on Dislocation Plasticity. 2017 xxx. http://hdl.handle.net/2078.1/226543

7. Tacq, Jeroen; Delannay, Laurent; Barde, Didier; Seefeldt, Marc. Direct micro-to-macro modelling of the cold rolling of pearlitic steel. In: MATEC Web of Conferences. Vol. 80, no.2008, p. 5 (2016). E D P Sciences: (France) Les Ulis, 2016 xxx. doi:10.1051/matecconf/20168002008. http://hdl.handle.net/2078.1/177584

8. Fivel, Marc; Tummala, Hareesh; Lemoine, Guerric; Pardoen, Thomas; Delannay, Laurent. Collective influence of texture, grain shape, size and dislocation density on the plasticity of polycrystalline metallic thin films. 2016 xxx. http://hdl.handle.net/2078.1/226577

9. Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise; Jacques, Pascal. The Effect of Second Population NbC Carbides on The Shear Localisation in a Nb-Modified AISI 410 Stainless Steel. 2016 xxx. http://hdl.handle.net/2078.1/182516

10. Delannay, Laurent; Lemoine, Guerric; Colla, Marie-Stéphane; Pardoen, Thomas. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. 2016 xxx. http://hdl.handle.net/2078.1/177394

11. Mithieux, Jean-Denis; Jacques, Pascal; Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise; Badinier, Guillaume. The Role of Chromium Carbides Volume Fraction on Plastic Instability Under Three-Point Bending Test in Martensitic Stainless Steel. 2016 xxx. http://hdl.handle.net/2078.1/182508

12. Delannay, Laurent; Lemoine, Guerric; Colla, Marie-Stéphane; Pardoen, Thomas; Idrissi, Hosni. Dislocation and back stress dominated viscoplasticity in free-standing sub-micron Pd films. 2016 xxx. http://hdl.handle.net/2078.1/174809

13. Mithieux, J.-D.; Jacques, Pascal; Pardoen, Thomas; Delannay, Laurent; Badinier, G.; Miotti Bettanini, Alvise. Characterization and modeling of ductile damage accumulation in martensitic stainless steels. In: Book of abstracts, 2015 xxx. http://hdl.handle.net/2078.1/173226

14. Lecarme, Liza; Chéhab, B.; Kumar, Alok; Jacques, Pascal; Scheyvaerts, Florence; Yerra Sampath, Kumar; Maire, Eric; De Vleeschouwer, Christophe; Pardoen, Thomas; TEKOGLU, Cihan; Véron, M.; Onck, P. R.; Mithieux; Martin, G.; Delannay, Laurent; Bréchet, Yves; Simar, Aude. Ductile damage and fracture in metallic alloys combining soft and hard phases. 2015 xxx. http://hdl.handle.net/2078.1/173424

15. Delannay, Laurent; Lemoine, Guerric; Colla, Marie-Stéphane; Pardoen, Thomas. Crystal Plasticity based modelling of Viscoplasticity in Nanocrystalline FCC Thin Films. 2015 xxx. http://hdl.handle.net/2078.1/173465

16. Pardoen, Thomas; Delannay, Laurent; Miotti Bettanini, Alvise; Jacques, Pascal. Characterization and Modeling of Ductile Damage Accumulation in Martensitic Stainless Steel. 2015 xxx. http://hdl.handle.net/2078.1/182512

17. Idrissi, Hosni; Colla, Marie-Stéphane; Pardoen, Thomas; Raskin, Jean-Pierre; Lemoine, Guerric; Schryvers, D.; Delannay, Laurent; Amin-Ahmadi, B.. Study of creep/relaxation in nanocrystalline FCC thin films through internal-stress-actuated microtensile testing method. 2015 xxx. http://hdl.handle.net/2078.1/160868

18. Idrissi, Hosni; Colla, Marie-Stéphane; Pardoen, Thomas; Raskin, Jean-Pierre; Lemoine, Guerric; Delannay, Laurent. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline freestanding Pd films. 2014 xxx. http://hdl.handle.net/2078.1/157189

19. Colla, Marie-Stéphane; Vayrette, Renaud; Ghidelli, Matteo; Pardoen, Thomas; Raskin, Jean-Pierre; Lemoine, Guerric; Delannay, Laurent; Coulombier, Michaël; Gravier, Sébastien; Blandin, Jean-Jacques. Size dependent plastic localization in thin nanocrystalline or amorphous metallic films. 2014 xxx. http://hdl.handle.net/2078.1/173420

20. Delannay, Laurent; Lemoine, Guerric; Colla, Marie-Stéphane; Pardoen, Thomas; Raskin, Jean-Pierre. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline FCC thin films. 2014 xxx. http://hdl.handle.net/2078.1/146547

21. Idrissi, Hosni; Colla, Marie-Stéphane; Pardoen, Thomas; Raskin, Jean-Pierre; Lemoine, Guerric; Delannay, Laurent. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline freestanding Pd films. 2014 xxx. http://hdl.handle.net/2078.1/157190

22. Lecarme, Liza; Tekoglu, Cihan; Scheyvaerts, Florence; Yerra Sampath, Kumar; Onck, P.R.; Pardoen, Thomas; Fabrègue, D.; Simar, Aude; Nielsen, K.L.; Delannay, Laurent; Tvergaard, V.. Micromechanical modelling of void nucleation, growth and coalescence in ductile solids with physics based hardening laws. 2011 xxx. http://hdl.handle.net/2078.1/93155

23. Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Mithieux, J.D.; Martin, G.; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves. Damage Nucleation and Growth in Dual-phase Materials. In: Proceedings of Second INternational Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2001), J. Olivier, M. Jirasek, O.Allix, and N. Moes eds, 2011, 99 xxx. http://hdl.handle.net/2078.1/78814

24. Lecarme, Liza; Tekoglu, Cihan; Scheyvaerts, Florence; Yerra Sampath, Kumar; Onck, P.R.; Pardoen, Thomas; Simar, Aude; Nielsen, K.L.; Delannay, Laurent; Tvergaard, V.; Fabrègue, Damien. Void growth and coalescence in ductile solids with physics based hardening laws. 2011 xxx. http://hdl.handle.net/2078.1/92183

25. Robert, G.; Kammoun, Slim; Delannay, Laurent; Brassart, Laurence; Doghri, Issam. Micromechanical modeling of short glass-fiber reinforced thermoplastics-Isotropic damage of pseudograins. In: AIP Conference Proceedings. Vol. 1353, p. 972-977 (2011). 2011 xxx. doi:10.1063/1.3590697. http://hdl.handle.net/2078.1/79072

26. Morelle, Xavier; Doneux, Catherine; André, Simon; Destoop, Vincent; Bailly, Christian; Pardoen, Thomas; Doghri, Issam; Melchior, Maxime; Dumont, D.; Delannay, Laurent; Daoust, Daniel. Local approach of fracture of HexFlow®RTM6 structural epoxy with thermoplastic and nanofillers additions. In: CD-Rom, Elesevier, 2011, p. réf. 123 xxx. http://hdl.handle.net/2078.1/92940

27. Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Mithieux, J.D.; Martin, G.; Willemet, Marie; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves. A Numerical study on damage nucleation in duplex stainless steels. In: Duplex Stainless Steel- Conference Proceedings, J. Charles ed. 2010, p.1265-1273; CD-Rom IV.C.4 xxx. http://hdl.handle.net/2078.1/79207

28. Brassart, Laurence; Yerra Sampath, Kumar; Pardoen, Thomas; Martin, G.; Willemet, Marie; Delannay, Laurent; Resk, Heba. Multisite modeling of strain heterogeneity in multiphase polycrystals - Evaluation based on CPFEM and experiment. In: Conference proceedings (P. Gumbsch and E. Van der Giessen eds.), 2010, 168 xxx. http://hdl.handle.net/2078.1/78942

29. Chéhab, B.; Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Mithieux, J.D.; Martin, G.; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves. Caractérisation de l'endommagement à chaud d'un acier inoxydable austéno-ferritique via la détermination du travail essentiel de rupture. In: Proceedings of Matériaux 2010, J. Crepin, J.-C. Bernier, S. Lartigue eds, 2010, p. CD-Rom C.7-288 xxx. http://hdl.handle.net/2078.1/79220

30. Tekoglu, Cihan; Yerra Sampath, Kumar; Pardoen, Thomas; Van Houtte, Paul; Delannay, Laurent; Van Bael, A.. The Facet-Gurson model for ductile damage process. In: Proceedings of the 18th European Conference on Fracture, D. Klingbeil, M. Vormwald, K.-G. Eulitz eds. 2010, p. CD-Rom B.05.3-2 xxx. http://hdl.handle.net/2078.1/79192

31. Kanjarla, Anand Krishna; Delannay, Laurent; Van Houtte, Paul. Modelling Study of Deformation Texture and Plastic Heterogeneity at Grain Boundaries and Triple Junctions. In: Materials Science Forum. Vol. 638-642, p. 190-195 (2010). 2010 xxx. doi:10.4028/www.scientific.net/MSF.638-642.190. http://hdl.handle.net/2078.1/79350

32. Pinna, C.; Chéhab, B.; Bornert, M.; Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Caldemaison, D.; Mithieux, J.D.; Martin, G.; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves. Determination of the high temperature micro-scale strain distribution - Application to Duplex Stainless Steel. In: Proceedings of the Duplex World 2010, Ed. J. Charles, 2010, CD-Rom IV.C.5 xxx. http://hdl.handle.net/2078.1/78492

33. Logé, Roland; Delannay, Laurent; Bernacki, Marc; Sun, Z; Resk, Heba. Modelling plastic deformation and recrystallization of polycrystals using digital micro-structures and adaptive meshing techniques. In: Steel Research International. Vol. 81, no. 9, p. 1420-1425 (2010). Wiley - V C H Verlag GmbH & Co. KGaA: (Germany) Weinheim, 2010 xxx. http://hdl.handle.net/2078.1/79451

34. Chéhab, B.; Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Mithieux, J.D.; Martin, G.; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves. Characterization of the Hot Cracking Resistance using the Essential Work of Fracture. In: Proceedings of the 10th Stainless Steel Brazilian Conference, M.C. Rebello, 2010, p. 216-226 xxx. http://hdl.handle.net/2078.1/79196

35. Chéhab, B.; Véron, M.; Yerra Sampath, Kumar; Pardoen, Thomas; Martin, G.; Delannay, Laurent; Fourmentin, R.; Bréchet, Yves; Mithieux, D.. Characterization of the Hot Cracking Resistance using the Concept of the Essential Work of Fracture - Application to Duplex Stainless steels. In: Proceedings of JA 2010, D. Chandesris an R. Alberny eds. 2010, p. CD-Rom T.4-2 xxx. http://hdl.handle.net/2078.1/79186

36. Idrissi, Hosni; Colla, Marie-Stéphane; Wang, B.; Pardoen, Thomas; Brugger, Charles; Raskin, Jean-Pierre; Massart, T.J.; Schryvers, D.; Boé, A.; Coulombier, Michaël; Delannay, Laurent; Dancette, Sylvain. Imperfection and size dependent fracture of thin metallic films. In: Conference proceedings, 2010, p. 243 xxx. http://hdl.handle.net/2078.1/78948

37. Delannay, Laurent; Brassart, Laurence; Doghri, Issam. Self-consistent modeling of DP steel incorporating short range interactions. In: International Journal of Material Forming. Vol. 2, no. 0, p. 447-450. 2009 xxx. http://hdl.handle.net/2078.1/71335

38. Bouvier, Salima; Habraken, Anne-Marie; Delannay, Laurent; Duchêne, Laurent; Hammami, Walid. Crystal plasticity modelling of monotonic shear tests on pure titanium. In: Proceedings of COMPLAS'09, 2009 xxx. http://hdl.handle.net/2078.1/79455

39. Habraken, Anne-Marie; Delannay, Laurent; Duchêne, Laurent; Hammami, Walid. Crystal plasticity prediction of Lankford coefficients using the MULTISITE model: influence of the critical resolved shear stresses. In: International Journal of Material Forming. Vol. 2, p. 65-68 (2009). 2009 xxx. doi:10.1007/s12289-009-0573-y. http://hdl.handle.net/2078.1/79461

40. Yerra Sampath, Kumar; Pardoen, Thomas; Lecarme, Liza; Tekoglu, Cihan; Delannay, Laurent. Strain hardening and viscoplastic effects on void growth and coalescence. 2009 xxx. http://hdl.handle.net/2078.1/75652

41. Sablin, Simon-Serge; Delannay, Laurent; Dejaeger, Kevin; Jacques, Pascal. Evaluation of two mutliscale models for the simulation of cross-die forming of DP steel. In: International Journal of Material Forming. Vol. 1, no. 1, p. 65-68 (2008). Springer, 2008 xxx. http://hdl.handle.net/2078.1/79465

42. Delannay, Laurent; Kanjarla, Anand K.; Van Houtte, Paul. Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures. In: CERAMIC TRANSACTIONS - Materials Processing and Texture. Vol. 200, no. 0, p. 721-730 (07/11/2008). 2008 xxx. doi:10.1002/9780470444191.ch81. http://hdl.handle.net/2078.1/71340

43. Melchior, Maxime; Delannay, Laurent; Kanjarla, Anand K.; Van Houtte, Paul; Signorelli, Javier W.. Cpfem investigation of the effect of grain shape on the planar anisotropy and the shear banding of textured metal sheets. In: Ceramic Transactions - Applications of Texture Analysis. Vol. 201, no. 0, p. 745-756 (07/11/2008). Wiley, 2008 xxx. doi:10.1002/9780470444214.ch79. http://hdl.handle.net/2078.1/71339

44. Chastel, Y.B.; Delannay, Laurent; Loge, R.E.; Beringhier, M.. Reducing computational cost and allowing automatic remeshing in FEM models of metal forming coupled with polycrystal plasticity. In: AIP Conference Proceedings. Vol. 908, no. 1, p. 387-392 (2007). 2007 xxx. doi:10.1063/1.2740842. http://hdl.handle.net/2078.1/79472

45. Delannay, Laurent; Thimus, Jean-François; Ouaar, Amine; Doghri, Issam. Micromechanics of the deformation and damage of steel fiber-reinforced concrete. In: International Journal of Damage Mechanics. Vol. 16, no. 2, p. 227-260 (2007). Sage Publications Ltd: London, 2007 xxx. doi:10.1177/1056789506064946. http://hdl.handle.net/2078.1/59629

46. Seefeldt, Marc; Delannay, Laurent; Van Houtte, Paul; Kanjarla, Anand. Crystal fragmentation at large plastic strains. In: Problems of Materials Science. Vol. 52, no. 4, p. 7-12 (2007). 2007 xxx. http://hdl.handle.net/2078.1/79474

47. Melchior, Maxime; Delannay, Laurent; Remacle, Jean-François. Crystal-plasticity-based FE modelling of a dual-phase microstructure in which grains have non-uniform shape and size. In: AIP Conference Proceedings. Vol. 908, no. 1, p. 381-386 (2007). Aip, 2007 xxx. doi:10.1063/1.2740841. http://hdl.handle.net/2078.1/66185

48. Pardoen, Thomas; Delannay, Laurent; Jacques, Pascal. Micro-Macro modelling of the plastic flow of trip-assisted multiphase steel. In: Proceedings of the 12th International Symposium on Plasticity and its Applications, 2006, p. 253-255 xxx. http://hdl.handle.net/2078.1/74969

49. Kanjarla, Anand Krishna; Van Bael, Albert; Delannay, Laurent; Van Houtte, Paul; Seefeldt, Marc. Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials. In: European Journal of Mechanics A - Solids. Vol. 25, no. 4, p. 634-648 (2006). Gauthier-villars/editions Elsevier: Paris, 2006 xxx. doi:10.1016/j.euromechsol.2006.05.003. http://hdl.handle.net/2078.1/59972

50. Melchior, Maxime; Iker, Mathieu; Delannay, Laurent; Godet, Stéphane; Jacques, Pascal. Crystal plasticity modeling of twinning induced plasticity in steels. In: Proceedings of 7th National Congress on theoretical and applied Mechanics, 2006, p. (CD-ROM) SOLI-8(141) xxx. http://hdl.handle.net/2078.1/74997

51. Melchior, M.A.; Iker, Mathieu; Delannay, Laurent; Godet, Stéphane; Jacques, Pascal. Crystal plasticity modeling of texture development and hardening of TWIP steel. In: Proceedings of the International Symposium on Advanced Steels, 2006, p. 377-384 xxx. http://hdl.handle.net/2078.1/74972

52. Lani, Frédéric; Furnemont, Quentin; Delannay, Laurent; Pardoen, Thomas; Jacques, Pascal. On the stress-dependence of the TRIP-effect in multiphase steels. In: Proceedings of the 8th ESAFORM Conference on material forming, 2005, p. 225-228 xxx. http://hdl.handle.net/2078.1/77752

53. Delannay, Laurent; Seefeldt, M; Van Bael, A; Van Houtte, Paul. The application of multiscale modelling for the prediction of plastic anisotropy and deformation textures. In: Materials Science Forum. Vol. 495-497, p. 31-41 (2005). Trans Tech Publications Ltd: Zurich-uetikon, 2005 xxx. http://hdl.handle.net/2078.1/60910

54. Lani, Frédéric; Delannay, Laurent; Jacques, Pascal. Simulation of deep-drawing of TRIP-assisted multiphase steel based on a micro-macro modelling. 2005 xxx. http://hdl.handle.net/2078.1/104584

55. Lani, Frédéric; Pardoen, Thomas; Van Rompaey, T.; Delannay, Laurent; Delannay, Francis. Modeling of the plastic deformation of multiphase metallic alloys with account of phase percolation and phase transition. In: Proceedings, Neat Press, 2005, p. 478-480 xxx. http://hdl.handle.net/2078.1/72344

56. Pardoen, Thomas; Delannay, Francis; Lacroix, Gauthier; Jacques, Pascal; Delannay, Laurent. Critical Assessment of the Plasticity and Fracture Properties of TRIP-assistedMultiphase Steels. In: La revue de Métallurgie -ATS, 2005, p. 152-153 xxx. http://hdl.handle.net/2078.1/72346

57. Loge, RE; Chastel, Y.; Delannay, Laurent; Beringhier, M.. Simulation of cup-drawing based on crystal plasticity applied to reduced grain samplings. In: Materials Science Forum. Vol. 495-497, p. 1639-1644 (2005). Trans Tech Publications Ltd: Zurich-uetikon, 2005 xxx. http://hdl.handle.net/2078.1/60916

58. Lani, Frédéric; Pardoen, Thomas; Delannay, Laurent; Jacques, Pascal. Micro-macro modeling and simulation of forming processes of TRIP-assisted multiphase steel. In: La revue de Métallurgie - ATS - JSI2005, L. Devillers, 2005, 162-163 xxx. http://hdl.handle.net/2078.1/74976

59. Jacques, Pascal; Lani, Frédéric; Pardoen, Thomas; Doghri, Issam; Van Rompaey, T.; Delannay, Laurent. Multiscale constitutive model for the simulation of forming operations on TRIP-assisted multiphase steel. In: Proceedings of the 7th Esaform Conference Material Forming, 2004, p. 127-130 xxx. http://hdl.handle.net/2078.1/74977


Book Chapters


1. Van Bael, Albert; Delannay, Laurent. Editorial: in Honor of Paul Van Houtte. In: International Journal of Plasticity , Elsevier, 2015. xxx xxx. doi:10.1016/j.ijplas.2014.09.002. http://hdl.handle.net/2078.1/155007