MEMA
Avenue Georges Lemaître 4-6/L4.05.02
1348 Louvain-la-Neuve
- Accueil
- Répertoire
- Laurent Delannay
Laurent Delannay
Professeur
Maître de recherche FNRS
Professor in the field of materials mechanics since 2006 at UCLouvain
- Diplômes
Année Label Institution 1996 Ingénieur civil mécanicien Université catholique de Louvain 2001 Docteur en sciences appliquées Katholieke Universiteit Leuven
The main scope of my research is to understand and predict the mechanical behaviour of materials based on experiments and modeling at both the micro and macro scales. Using advanced experimental techniques, I probe the deformation and the evolution of microstructure (incl. potential damage, phase changes and crystallographic texture) and use this to assess original micromechanical models. The case studies span from technologically-oriented contribution to the development of high performance metallic alloys to more fundamental studies of the mechanics of biological and geological materials.
Ongoing research projects include:
- Influence of diffusible hydrogen on the plasticity of fcc-bcc roll-bonded multilaminates (FNRS-PDR)
- Investigation of the micromechanical integrity of Cu-Fe and Cu-W joints subjected to the cyclic heat loads of a nuclear fusion reactor (EUROFUSION).
- Modeling of irradiation induced microcracking in pyrolytic (collab. NNL UK)
- NanoGG : Nanomechanics for geodynamics and geoengineering (ARC)
- Finite element modeling of the influence of subcutaneous tissue anisotropy during fingertip normal and tangential loadings (UCL)
Duprez, Guillaume ; Delhaye, Benoit ; Delannay, Laurent. Collagen Induces Anisotropy in Fingertip Subcutaneous Tissues During Contact. In: IEEE Transactions on Haptics, p. 1-11 (2024). doi:10.1109/toh.2024.3406251 (Accepté/Sous presse).
Baral, Paul ; Kashiwar, Ankush ; Coulombier, Michaël ; Delannay, Laurent ; Hoummada, Khalid ; Raskin, Jean Pierre ; Idrissi, Hosni ; Pardoen, Thomas. Grain boundary-mediated plasticity in aluminum films unraveled by a statistical approach combining nano-DIC and ACOM-TEM. In: Acta Materialia, Vol. 276, no.120081, p. 1-14 (2024). doi:10.1016/j.actamat.2024.120081.
Croonenborghs, Maïté ; Ismail, Karim ; Mousny, Maryline ; Delannay, Laurent ; Everaerts, Joris ; Korsunsky, Alexander M. ; Jacques, Pascal ; Pardoen, Thomas. Residual Stresses in Surgical Growing Rods. In: Journal of biomechanical engineering, Vol. 14, no. 1, p. 011003 (2024). doi:10.1115/1.4063745 (Accepté/Sous presse).
Lin, Fengxiang ; Delannay, Laurent. Non-uniform grain boundary migration during static recrystallization: A cellular automaton study. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, (2022) (Accepté/Sous presse).
Zinovev, Aleksandr ; Delannay, Laurent ; Terentyev, Dmitry. Modelling strain hardening during cyclic thermal shock tests of tungsten. In: Journal of Nuclear Materials, Vol. 546, p. 152776 (2021). doi:10.1016/j.jnucmat.2020.152776.
Zinovev, Aleksandr ; Delannay, Laurent ; Terentyev, Dmitry. Plastic deformation of ITER specification tungsten: Temperature and strain rate dependent constitutive law deduced by inverse finite element analysis. In: International Journal of Refractory Metals and Hard Materials, Vol. 96, p. 105481 (2021). doi:10.1016/j.ijrmhm.2021.105481.
Szyndler, Joanna ; Grosman, Franciszek ; Tkocz, Marek ; Delannay, Laurent ; Wang, Jiangting ; Muszka, Krzysztof ; Madej, Lukasz. Through scale material flow investigation in novel incremental bulk forming process. In: Journal of Materials Processing Technology, Vol. 287, p. 116487 (2021). doi:10.1016/j.jmatprotec.2019.116487.
Liu, Hong ; Lin, Fengxiang ; Liu, Pei ; Yue, Yuan ; Shin, Kwang Seon ; Peng, Liming ; Delannay, Laurent ; Nie, Jian-Feng ; Moelans, Nele. Variant selection of primary–secondary extension twin pairs in magnesium: An analytical calculation study. In: Acta Materialia, Vol. 219, p. 117221 (2021). doi:10.1016/j.actamat.2021.117221.
Lin, Fengxiang ; Shi, Qiwei ; Delannay, Laurent. Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals. In: International Journal of Solids and Structures, Vol. 184, p. 167-177 (2020). doi:10.1016/j.ijsolstr.2019.01.024.
Miotti Bettanini, Alvise ; Ding, Lipeng ; Mithieux, Jean-Denis ; Parrens, Coralie ; Idrissi, Hosni ; Schryvers, Dominique ; Delannay, Laurent ; Pardoen, Thomas ; Jacques, Pascal. Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel. In: Materials & Design, Vol. 162, p. 362 - 374 (2019). doi:10.1016/j.matdes.2018.12.005. doi:10.1016/j.matdes.2018.12.005.
Delannay, Laurent ; Lemoine, Guerric ; Coulombier, Michaël ; Pardoen, Thomas. Modelling creep induced by internal stresses in freestanding submicron Cu film. In: IOP Conference Series: Materials Science and Engineering, Vol. 580, p. 012003 (2019). doi:10.1088/1757-899x/580/1/012003.
Delannay, Laurent. Modeling of microscopic strain heterogeneity during wire drawing of pearlite. In: Procedia Manufacturing, Vol. 15, p. 1893-1899 (2018). doi:10.1016/j.promfg.2018.07.199.
Miotti Bettanini, Alvise ; Hannard, Florent ; Jacques, Pascal ; Pardoen, Thomas ; Guilleume, Badinier ; Mithieux, Jean Denis ; Delannay, Laurent. Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 731, p. 495 - 505 (2018). doi:10.1016/j.msea.2018.06.012.
Poddar, Shashi ; Pereira de Sa, Pedro Miguel ; Cai, Ronggang ; Delannay, Laurent ; Nysten, Bernard ; Piraux, Luc ; Jonas, Alain M.. Room-Temperature Magnetic Switching of the Electric Polarization in Ferroelectric Nanopillars. In: ACS Nano, Vol. 12, p. 576-584 (2018). doi:10.1021/acsnano.7b07389.
Lin, Fengxiang ; Marteleur, Matthieu ; Jacques, Pascal ; Delannay, Laurent. Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. In: International Journal of Plasticity, Vol. 105, p. 195-210 (2018). doi:10.1016/j.ijplas.2018.02.012.
Zinovev, Aleksandr ; Terentyev, Dmitry ; Dubinko, Andrii ; Delannay, Laurent. Constitutive law for thermally-activated plasticity of recrystallized tungsten. In: Journal of Nuclear Materials, Vol. 496, p. 325-332 (2017). doi:10.1016/j.jnucmat.2017.09.044.
Zinovev, Aleksandr ; Terentyev, D ; Delannay, Laurent. Finite element analysis of heat load of tungsten relevant to ITER conditions. In: Physica Scripta : an international journal for experimental and theoretical physics, Vol. T170, p. 014002 (2017). doi:10.1088/0031-8949/2017/T170/014002.
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Badinier, Guillaume ; Mithieux, Jean-Denis. Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel. In: AIP Conference Proceedings, Vol. 1896, p. 020010 (2017). doi:10.1063/1.5007967.
Lin, Fengxiang ; Marteleur, Matthieu ; Alkorta, Jon ; Jacques, Pascal ; Delannay, Laurent. Local stress field induced by twinning in a metastable beta-titanium alloy. In: IOP Conference Series: Materials Science and Engineering, Vol. 219, p. 012031 (2017). doi:10.1088/1757-899X/219/1/012031.
Amodeo, Jonathan ; dancette, sylvain ; Delannay, Laurent. Atomistically-informed crystal plasticity in MgO polycrystals under pressure. In: International Journal of Plasticity, Vol. 82, p. 177-191 (2016).
Dancette, Sylvain ; Browet, Arnaud ; Martin, Guilhem ; Willemet, Marie ; Delannay, Laurent. Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries. In: Modelling and Simulation in Materials Science and Engineering, Vol. 24, no. 055014, p. 1-14 (2016). doi:10.1088/0965-0393/24/5/055014.
Lemoine, Guerric ; Delannay, Laurent ; Idrissi, Hosni ; Colla, Marie-Stéphane ; Pardoen, Thomas. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. In: Acta Materialia, Vol. 111, p. 10-21 (2016). doi:10.1016/j.actamat.2016.03.038.
Kowalski, Nicolas ; Delannay, Laurent ; Yan, Peng ; Remacle, Jean-François. Finite element modeling of periodic polycrystalline aggregates with intergranular cracks. In: International Journal of Solids and Structures, Vol. 90, p. 60-68 (2016). doi:10.1016/j.ijsolstr.2016.04.010.
Yan, P. ; Delannay, Laurent ; Payne, J.F.B. ; Tzelepi, A.. Micromechanistic modelling of the polycrystalline response of graphite under temperature changes and irradiation. In: Carbon, Vol. 96, p. 827-835 (2016). doi:10.1016/j.carbon.2015.10.019.
Kammoun, Slim ; Doghri, Issam ; Brassart, Laurence ; Delannay, Laurent. Micromechanical modeling of the progressive failure in short glass–fiber reinforced thermoplastics – First Pseudo-Grain Damage model. In: Composites Part A: Applied Science and Manufacturing, Vol. 73, p. 166-175 (2015). doi:10.1016/j.compositesa.2015.02.017.
Delannay, Laurent ; Yan, Peng ; Payne, J.F.B. ; Tzelepi, N.. Predictions of inter-granular cracking and dimensional changes of irradiated polycrystalline graphite under plane strain. In: Computational Materials Science, Vol. 87, p. 129-137 (2014). doi:10.1016/j.commatsci.2014.02.008.
Delannay, Laurent ; Mishin, Oleg V.. Crystal Plasticity Modeling of the Through-Thickness Texture Heterogeneity in Heavily Rolled Aluminum. In: Key Engineering Materials, Vol. 554-557, p. 1189-1194 (2013). doi:10.4028/www.scientific.net/KEM.554-557.1189.
Yerra Sampath, Kumar ; Martin, G. ; Véron, M. ; Bréchet, Y. ; Mithieux, J.D. ; Delannay, Laurent ; Pardoen, Thomas. Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems. In: Engineering Fracture Mechanics, Vol. 102, p. 77-100 (2013). doi:10.1016/j.engfracmech.2013.02.028.
Miled, B. ; Doghri, Issam ; Brassart, Laurence ; Delannay, Laurent. Micromechanical modeling of coupled viscoelastic–viscoplastic composites based on an incrementally affine formulation. In: International Journal of Solids and Structures, Vol. 50, no. 10, p. 1755-1769 (2013). doi:10.1016/j.ijsolstr.2013.02.004.
Martin, Guilhem ; Kumar Yerra, Sampath ; Bréchet, Yves ; Véron , Muriel ; Mithieux, Jean-Denis ; Chéhab, Béchir ; Delannay, Laurent ; Pardoen, Thomas. A Macro- and micromechanics investigation of hot cracking in duplex steels. In: Acta Materialia, Vol. 60, no. 11, p. 4646-4660 (June 2012). doi:10.1016/j.actamat.2012.03.040.
Dancette, Sylvain ; Delannay, Laurent ; Renard, Krystel ; Melchior, Maxime ; Jacques, Pascal. Crystal plasticity modeling of texture development and hardening in TWIP steels. In: Acta Materialia, Vol. 60, no. 5, p. 2135-2145 (March 2012). doi:10.1016/j.actamat.2012.01.015.
Brassart, Laurence ; Doghri, Issam ; Delannay, Laurent ; Stainier, Laurent. Homogenization of elasto-(visco) plastic composites based on an incremental variational principle. In: International Journal of Plasticity, Vol. 36, p. 86-112 (sepembre 2012). doi:10.1016/j.ijplas.2012.03.010.
Delannay, Laurent ; Barnett, M.R.. Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals. In: International Journal of Plasticity, Vol. 32-33, p. 70-84 (2012). doi:10.1016/j.ijplas.2011.12.002.
Delannay, Laurent. Prediction of the plastic anisotropy of rolled sheets under a combined effect of texture, grain shape and grain size. In: Materials Science Forum, Vol. 702-703, p. 182-187 (2012). doi:10.4028/www.scientific.net/MSF.702-703.182.
Eyckens, Philip ; Delannay, Laurent. Validation of the texture-based ALAMEL and VPSC models by measured anisotropy of plastic yielding. In: Materials Science Forum, Vol. 702-703, p. 233-236 (2012). doi:10.4028/www.scientific.net/MSF.702-703.233.
Dobrzynski, Cecile ; Melchior, Maxime ; Delannay, Laurent ; Remacle, Jean-Francois. A mesh adaptation procedure for periodic domains. In: International journal for numerical methods in engineering, Vol. 86, no. 12, p. 1396-1412 (2011). doi:10.1002/nme.3106.
Brassart, Laurence ; Stainier, Laurent ; Doghri, Issam ; Delannay, Laurent. A variational formulation for the incremental homogenization of elasto-plastic composites. In: Journal of the Mechanics and Physics of Solids, Vol. 59, no. 12, p. 2455-2475 (December 2011). doi:10.1016/j.jmps.2011.09.004.
Miled, Bilel ; Doghri, Issam ; Delannay, Laurent. Coupled viscoelastic–viscoplastic modeling of homogeneous and isotropic polymers: Numerical algorithm and analytical solutions. In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, no. 47-48, p. 3381-3394 (November 2011). doi:10.1016/j.cma.2011.08.015.
Martin, Guilhem ; Véron, Muriel ; Chéhab, B. ; Fourmentin, R. ; Mithieux, J.D. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas ; Bréchet, Yves. Duplex Stainless Steel Microstructural Developments as Model Microstructures for Hot Ductility Investigations. In: Solid State Phenomena, Vol. 172-174, no. -, p. 350-355 (2011). doi:10.4028/www.scientific.net/SSP.172-174.350.
Othmani, Yamen ; Delannay, Laurent ; Doghri, Issam. Equivalent inclusion solution adapted to particle debonding with a non-linear cohesive law. In: International Journal of Solids and Structures, Vol. 48, no. 24, p. 3326-3335 (December 2011). doi:10.1016/j.ijsolstr.2011.08.002.
Kanjarla, Anand Krishna ; Delannay, Laurent ; Van Houtte, Paul. Finite Element Study of Intragrain Plastic Heterogeneity near a Triple Junction. In: Metallurgical and materials transactions a-physical metallurgy andmaterials science, Vol. 42A, no. 3, p. 660-668 (2011). doi:10.1007/s11661-010-0455-4.
Kammoun, Slim ; Doghri, Issam ; Adam, Laurent ; Robert, Gilles ; Delannay, Laurent. First pseudo-grain failure model for inelastic composites with misaligned short fibers. In: Composites Part A: Applied Science and Manufacturing, Vol. 42, no. 12, p. 1892-1902 (December 2011). doi:10.1016/j.compositesa.2011.08.013.
Raveendra, S. ; Kanjarla, A. K. ; Paranjape, H. ; Mishra, S. K. ; Mishra, S. ; Delannay, Laurent ; Samajdar, I. ; Vanhoutte, P.. Strain Mode Dependence of Deformation Texture Developments: Microstructural Origin. In: Metallurgical and materials transactions a-physical metallurgy andmaterials science, Vol. 42A, no. 7, p. 2113-2124 (2011). doi:10.1007/s11661-010-0580-0.
Dancette, Sylvain ; Melchior, Maxime ; Delannay, Laurent ; Renard, Krystel ; Jacques, Pascal. Strain heterogeneity and local anisotropy in TWIP steels. In: AIP Conference Proceedings, Vol. 1353, p. 145-150 (2011). doi:10.1063/1.3589506.
Kanjarla, Anand Krishna ; Van Houtte, Paul ; Delannay, Laurent. Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method. In: International Journal of Plasticity, Vol. 26, no. 8, p. 1220-1233 (2010). doi:10.1016/j.ijplas.2009.05.005.
Brassart, Laurence ; Doghri, Issam ; Delannay, Laurent. Homogenization of elasto-plastic composites coupled with a nonlinear finite element analysis of the equivalent inclusion problem. In: International Journal of Solids and Structures, Vol. 47, no. 5, p. 716-729 (2010). doi:10.1016/j.ijsolstr.2009.11.013.
Delannay, Laurent ; Melchior, Maxime ; Signorelli, J. W. ; Remacle, Jean-François ; Kuwabara, T.. Influence of grain shape on the planar anisotropy of rolled steel sheets - evaluation of three models. In: Computational materials science, Vol. 45, no. 3, p. 739-743 (2009). doi:10.1016/j.commatsci.2008.06.013.
Dancette, S. ; Delannay, Laurent ; Jodlowski, T. ; Giovanola, J.. Multisite model prediction of texture induced anisotropy in brass. In: International Journal of Material Forming, Vol. 3, no. SUPPL. 1, p. 251-254 (2010). doi:10.1007/s12289-010-0754-8.
Yerra Sampath, Kumar ; Tekoglu, C. ; Scheyvaerts, Florence ; Delannay, Laurent ; Van Houtte, Paul ; Pardoen, Thomas. Void growth and coalescence in single crystals. In: International Journal of Solids and Structures, Vol. 47, no. 7-8, p. 1016-1029 (2010). doi:10.1016/j.ijsolstr.2009.12.019.
Resk, Heba ; Delannay, Laurent ; Bernacki, M. ; Coupez, T. ; Loge, R.. Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations. In: Modelling and Simulation in Materials Science and Engineering, Vol. 17, no. 7 (2009). doi:10.1088/0965-0393/17/7/075012.
Brassart, Laurence ; Inglis, H. M. ; Delannay, Laurent ; Doghri, Issam ; Geubelle, P. H.. An extended Mori-Tanaka homogenization scheme for finite strain modeling of debonding in particle-reinforced elastomers. In: Computational Materials Science, Vol. 45, no. 3, p. 611-616 (2009). doi:10.1016/j.commatsci.2008.06.021.
Delannay, Laurent ; Pierman, Anne-Pascale ; Jacques, Pascal. Assessment of a Micro-Macro Modeling of the Bending and Unbending of Multiphase Steel Sheets. In: Advanced Engineering Materials, Vol. 11, no. 3, p. 148-152 (2009). doi:10.1002/adem.200800288.
Melchior, Maxime ; Jacques, Pascal ; Delannay, Laurent. Effect of Twinning and Grain Interaction On Texture Development in Rolled Twip Steel. In: Steel Research International, p. 153-159 (2008).
Loge, R. ; Bernacki, M. ; Resk, Heba ; Delannay, Laurent ; Digonnet, H. ; Chastel, Y. ; Coupez, T.. Linking plastic deformation to recrystallization in metals using digital microstructures. In: Philosophical Magazine (London, 2003), Vol. 88, no. 30-32, p. 3691-3712 (2008). doi:10.1080/14786430802502575.
Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas. Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. In: International Journal of Solids and Structures, Vol. 45, no. 6, p. 1825-1843 (2008). doi:10.1016/j.ijsolstr.2007.10.026.
Ryelandt, Sophie ; Delannay, Laurent ; Persoons, Rosita ; Van Acker, Karel ; Delannay, Francis. Measurement of the debonding resistance of strongly adherent thick coatings on metals via in-plane tensile straining. In: Advanced Engineering Materials, Vol. 9, no. 5, p. 406-412 (2007). doi:10.1002/adem.200700014.
Delannay, Laurent ; Doghri, Issam ; Pierard, O.. Prediction of tension-compression cycles in multiphase steel using a modified incremental mean-field model. In: International Journal of Solids and Structures, Vol. 44, no. 22-23, p. 7291-7306 (2007). doi:10.1016/j.ijsolstr.2007.04.013.
Beringhier, M. ; Delannay, Laurent ; Chastel, Y. ; Loge, R.. Using Lagrangian particles to efficiently describe microstructure evolution in metal forming - application to texture-induced mechanical anisotropy. In: Modelling and Simulation in Materials Science and Engineering, Vol. 15, no. 3, p. 191-204 (2007). doi:10.1088/0965-0393/15/3/001.
Melchior, Maxime ; Delannay, Laurent. A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size. In: Computational Materials Science, Vol. 37, no. 4, p. 557-564 (2006). doi:10.1016/j.commatsci.2005.12.002.
Delannay, Laurent ; Jacques, Pascal ; Kalidindi, Surya R.. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. In: International Journal of Plasticity, Vol. 22, no. 10, p. 1879-1898 (2006). doi:10.1016/j.ijplas.2006.01.008.
Delannay, Laurent ; Lani, Frédéric ; Pardoen, Thomas ; Delannay, Francis. Mean field modelling of the plastic behaviour of co-continuous dual-phase alloys with strong morphological anisotropy. In: International Journal of Plasticity, Vol. 22, no. 12, p. 2327-2345 (2006). doi:10.1016/j.ijplas.2006.03.009.
Delannay, Laurent ; Melchior, Maxime ; Jacques, Pascal ; Van Houtte, Paul. Simulation of the lattice strains developed during a tensile test on a multiphase steel. In: Materials Science Forum, Vol. 495-497, p. 1627-1632 (2005).
Delannay, Laurent ; Loge, R.E. ; Chastel, Y. ; Signorelli, J.W. ; Van Houtte, Paul. Measurement of in-grain orientation gradients by EBSD and comparison with finite element results. In: Advanced Engineering Materials, Vol. 5, no. 8, p. 597-600 (2003). doi:10.1002/adem.200300376.
Liu, Y.S ; Delannay, Laurent ; Van Houtte, Paul. Application of the Lamel model for simulating cold rolling texture in molybdenum sheet. In: Acta Materialia, Vol. 50, no.7, p. 1849-1856 (2002). doi:10.1016/S1359-6454(02)00037-X.
Van Houtte, Paul ; Delannay, Laurent ; Kalidindi, S.R.. Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction. In: International Journal of Plasticity, Vol. 18, no. 3, p. 359-377 (2002). doi:10.1016/S0749-6419(00)00102-9.
Delannay, Laurent. Prediction of intergranular strains in cubic metals using a multisite elastic-plastic model. In: Acta Materialia, Vol. 50, no.20, p. 5127-5138 (2002). doi:10.1016/S1359-6454(02)00369-5.
Delannay, Laurent ; Kalidindi, S.R. ; Van Houtte, Paul. Quantitative prediction of textures in aluminium cold rolled to moderate strains. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 336, no. 1-2, p. 233-244 (2002). doi:10.1016/S0921-5093(01)01966-9.
Seefeldt, M ; Delannay, Laurent ; Peeters, B ; Kalidindi, S.R ; Van Houtte, Paul. A disclination-based model for grain subdivision. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 319-321, p. 192-196 (2001). doi:10.1016/S0921-5093(01)00994-7.
Seefeldt, M ; Delannay, Laurent ; Peeters, B ; Aernoudt, E ; Van Houtte, Paul. Modelling the initial stage of grain subdivision with the help of a coupled substructure and texture evolution algorithm. In: Acta Materialia, Vol. 49, no.12, p. 2129-2143 (2001). doi:10.1016/S1359-6454(01)00126-4.
Delannay, Laurent ; Mishin, O.V ; Jensen, D.Juu ; Van Houtte, Paul. Quantitative analysis of grain subdivision in cold rolled aluminium. In: Acta Materialia, Vol. 49, no. 13, p. 2441-2451 (2001). doi:10.1016/S1359-6454(01)00150-1.
Delannay, Laurent ; Houtte, P Van ; Bael, A Van ; Vanderschueren, D. Application of a texture parameter model to study planar anisotropy of rolled steel sheets. In: Modelling and Simulation in Materials Science and Engineering, Vol. 8, no.4, p. 413-422 (2000). doi:10.1088/0965-0393/8/4/301.
Duprez, Guillaume ; Hall, James ; Saal, Hannes ; Delhaye, Benoit ; Delannay, Laurent. Can OCT Imaging and FE Simulations assist us Tackle Fingertip micromechanics?. Eurohaptics Annual Meeting (Lille, du 01/07/2024 au 03/07/2024). doi:10.5281/zenodo.12548978.
Baral, Paul ; Kashiwar, Ankush ; Coulombier, Michaël ; Delannay, Laurent ; Hoummada, Khalid ; Raskin, Jean-Pierre ; Idrissi, Hosni ; Pardoen, Thomas. Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding. 19th European Mechanics of Materials Conference (EMMC19) (Madrid, Spain, du 29/05/2024 au 31/05/2024).
Ruiz Rodriguez, Raul ; Delannay, Laurent ; Pardoen, Thomas. Crystal plasticity modeling of nanoindentation in ITER-relevant W/Cu joints. 19th European Mechanics of Materials Conference, EMMC 19. (Madrid, Spain, du 29/05/2024 au 31/05/2024).
Hanon, Guillaume ; Delannay, Laurent. Heterogeneity of strain and texture inside roll-bonded multilaminates. Material Forming. In: Materials Research Proceedings : Material Forming: ESAFORM 2024, (2024). doi:10.21741/9781644903131-191.
Delannay, Laurent ; Hanon, Guillaume ; malet, Loïc. Texture and Microstructure After Roll-Bonding of an Fe-Al Multilaminate. 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity (Mandelieu, du 25/09/2023 au 29/09/2023). In: Lecture Notes in Mechanical Engineering, (2023). doi:10.1007/978-3-031-40920-2_67.
Poncelet, Olivier ; Delcroix, Mathieu ; van der Rest, Camille ; Delannay, Laurent ; Simar, Aude. Roughness and porosity sensitivity in AlSi10Mg L-PBF parts to the job load. ESIAM 2023 (Porto, du 04/09/2023 au 06/09/2023).
Duprez, Guillaume ; Delannay, Laurent ; Delhaye, Benoit. Influence of tissue anisotropy on fingertip deformation at the location of tactile mechanoreceptors. Eurohaptics Annual Meeting Workshop (Hamburg, Germany, 22/05/2022).
Duprez, Guillaume ; Delhaye, Benoit ; Delannay, Laurent. Influence of tissue anisotropy on fingertip deformation nearby tactile mechanoreceptors. Euromech Colloquium 627 (Frankfurt, 06/04/2022).
Lakhdari, Mohammed-Ali ; Estevez, Rafael ; Véron, Murien ; Gomes Affonseca Netto, Nelson ; Delannay, Laurent ; Simar, Aude. Résistance à la fissuration accrue d’alliages d’aluminium renforcés par des particules de NiTi et champs de contraintes contrôlés. Conférence Internationale Matériaux 2022 (Lille, France, du 24/10/2022 au 28/10/2022).
Croonenborghs, Maïté ; Ismail, Karim ; Everaerts, J ; Korsunsky, AM ; Laville, Colin ; Delannay, Laurent ; Pardoen, Thomas. Influence du pliage sur la resistance en fatigue des tiges de croissance. Aussois 2020 - Contraintes résiduelles : de nouveaux outils pour de nouveaux défis (Aussois, France, du 20/01/2020 au 24/01/2020).
Pardoen, Thomas ; Hannard, Florent ; Ismail, Karim ; Miotti Bettanini, Alvise ; Lecarme, Liza ; Maire, Eric ; Perlade, Astrid ; Mithieux, Jean-Denis ; Brassart, Laurence ; Delannay, Laurent ; Jacques, Pascal ; Simar, Aude. Microstructure heterogeneity dominated ductile fracture. 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (Ankara, Turkey, du 22/08/2019 au 23/08/2019).
Miotti Bettanini, Alvise ; Laville, Colin ; Mithieux, Jean-Denis ; Parrens, Coralie ; Jacques, Pascal ; Pardoen, Thomas ; Delannay, Laurent. Ductile to brittle failure transition under bending deformation of martensitic stainless steels. ESMC 2018, 10th European Solid Mechnics Conference (Bologna, Italy, du 02/07/2018 au 06/07/2018).
Fivel, Marc ; Tummala, Hareesh ; Hammad, Mohamed ; Pardoen, Thomas ; Idrissi, Hosni ; Delannay, Laurent. 3D DD Investigations of the Role of Interfaces on Dislocation Plasticity. MRS Spring Meeting 2017 (Phoenix, USA, du 17/04/2017 au 21/04/2017).
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Badinier, Guillaume ; Mithieux, Jean-Denis. Influence Of Microscopic Strain Heterogeneity On The Formability Of Martensitic Stainless Steel. ESAFORM 2017 (Dublin, Ireland, du 26/04/2017 au 28/04/2017). In: Proceedings of ESAFORM, 2017.
Szyndler, Joanna ; Delannay, Laurent ; Muszka, Krzysztof ; Madej, Lukasz. Numerical and experimental microscale analysis of the incremental forming process. Proceedings of the 20th International ESAFORM Conference on Material Forming (Dublin, Ireland, du 26/04/2017 au 28/04/2017). In: AIP Conference Proceedings, Vol. 1896, p. 080006 (2017). doi:10.1063/1.5008086.
Tummala, Hareesh ; Fivel, Marc ; Pardoen, Thomas ; Delannay, Laurent ; Lemoine, Guerric. Collective influence of texture, grain shape, size and dislocation density on the plasticity of polycrystalline metallic thin films. EMMC15, 15th European Mechanics of Materials Conference (Brussels, Belgium, du 07/09/2016 au 09/09/2016).
Delannay, Laurent ; Tacq, Jeroen ; Barde, Didier ; Seefeldt, Marc. Direct micro-to-macro modelling of the cold rolling of pearlitic steel. NUMIFORM 2016 (Troie, France). In: MATEC Web of Conferences, Vol. 80, no.2008, p. 5 (2016). doi:10.1051/matecconf/20168002008.
Lemoine, Guerric ; Colla, Marie-Stéphane ; Idrissi, Hosni ; Pardoen, Thomas ; Delannay, Laurent. Dislocation and back stress dominated viscoplasticity in free-standing sub-micron Pd films. ICACM 2016 Symposium (Compiègne, France, du 01/06/2016 au 03/06/2016) (Soumis).
Lemoine, Guerric ; Colla, Marie-Stéphane ; Pardoen, Thomas ; Delannay, Laurent. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. European Mechanics of Materials Conference (EMMC15) (Brussels, Belgium, du 07/09/2016 au 09/09/2016).
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas. The Effect of Second Population NbC Carbides on The Shear Localisation in a Nb-Modified AISI 410 Stainless Steel. EMMC15 – 15th European Mechanics of Materials Conference (Brussels, Belgium, du 07/09/16 au 09/09/2016).
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Mithieux, Jean-Denis ; Badinier, Guillaume. The Role of Chromium Carbides Volume Fraction on Plastic Instability Under Three-Point Bending Test in Martensitic Stainless Steel. RTME 2016 (Aveiro, Portugal, du 11/07/2016 au 13/07/2016).
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas. Characterization and Modeling of Ductile Damage Accumulation in Martensitic Stainless Steel. EUROMECH - Colloquium 570 Multiscale analysis of the impact of microstructure on plasticity and fracture in interface-dominated materials (Houffalize, Belgium, du 20/10/2015 au 23/10/2015).
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Badinier, G. ; Mithieux, J.-D.. Characterization and modeling of ductile damage accumulation in martensitic stainless steels. EUROMAT 2015 (Varsovie, Pologne, du 20/09/2015 au 24/09/2015). In: Book of abstracts, 2015.
Lemoine, Guerric ; Colla, Marie-Stéphane ; Pardoen, Thomas ; Delannay, Laurent. Crystal Plasticity based modelling of Viscoplasticity in Nanocrystalline FCC Thin Films. Euromech Colloquium 570, Multiscale analysis of the impact of microstructure on plasticity and fracture in interface-dominated materials (Houffalize, Belgium, du 20/10/2015 au 23/10/2015).
Pardoen, Thomas ; Yerra Sampath, Kumar ; Lecarme, Liza ; Scheyvaerts, Florence ; Kumar, Alok ; Martin, G. ; Chéhab, B. ; TEKOGLU, Cihan ; De Vleeschouwer, Christophe ; Jacques, Pascal ; Maire, Eric ; Mithieux ; Bréchet, Yves ; Véron, M. ; Onck, P. R. ; Simar, Aude ; Delannay, Laurent. Ductile damage and fracture in metallic alloys combining soft and hard phases. Plasticity'15 (Montego Bay, Jamaica, du 04/01/2015 au 09/01/2015).
Lemoine, Guerric ; Colla, Marie-Stéphane ; Amin-Ahmadi, B. ; Idrissi, Hosni ; Schryvers, D. ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Delannay, Laurent. Study of creep/relaxation in nanocrystalline FCC thin films through internal-stress-actuated microtensile testing method. 13th International Conference on Creep and Fracture of Engineering Materials and Structures - CREEP2015 (Toulouse, du 31/05/2015 au 04/06/2015).
Lemoine, Guerric ; Colla, Marie-Stéphane ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Delannay, Laurent. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline FCC thin films. 4th International Symposium on Computational Mechanics of Polycrystals (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany, du 14/07/2014 au 15/07/2014).
Lemoine, Guerric ; Colla, Marie-Stéphane ; Idrissi, Hosni ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Delannay, Laurent. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline freestanding Pd films. 14th European Mechanics of Materials Conference - EMMC14 (Gothenburg,Sweden, du 27/08/2014 au 29/08/2014).
Lemoine, Guerric ; Colla, Marie-Stéphane ; Idrissi, Hosni ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Delannay, Laurent. Crystal plasticity based modelling of strain hardening and creep in nanocrystalline freestanding Pd films. 35th Risø International Symposium on Materials Science. New Frontiers of Nanometals (Roskilde, Denmark, du 01/09/2014 au 05/09/2014).
Pardoen, Thomas ; Coulombier, Michaël ; Colla, Marie-Stéphane ; Lemoine, Guerric ; Vayrette, Renaud ; Ghidelli, Matteo ; Blandin, Jean-Jacques ; Gravier, Sébastien ; Delannay, Laurent ; Raskin, Jean-Pierre. Size dependent plastic localization in thin nanocrystalline or amorphous metallic films. MRS fall meeting (Boston, USA, du 01/12/2014 au 05/12/2014).
Yerra Sampath, Kumar ; Martin, G. ; Véron, M. ; Bréchet, Yves ; Fourmentin, R. ; Mithieux, J.D. ; Delannay, Laurent ; Pardoen, Thomas. Damage Nucleation and Growth in Dual-phase Materials. International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2011) (Barcelone, Espagne, du 06/06/2011 au 08/06/2011). In: Proceedings of Second INternational Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2001), J. Olivier, M. Jirasek, O.Allix, and N. Moes eds, 2011, 99.
André, Simon ; Melchior, Maxime ; Morelle, Xavier ; Dumont, D. ; Destoop, Vincent ; Doneux, Catherine ; Delannay, Laurent ; Doghri, Issam ; Daoust, Daniel ; Bailly, Christian ; Pardoen, Thomas. Local approach of fracture of HexFlow®RTM6 structural epoxy with thermoplastic and nanofillers additions . 6th International Conference on Fracture of Polymers, Composites and Adhesives (Les Diablerets, Switzerland, du 11/09/2011 au 15/09/2011). In: CD-Rom, Elesevier , 2011, p. réf. 123.
Kammoun, Slim ; Brassart, Laurence ; Robert, G. ; Doghri, Issam ; Delannay, Laurent. Micromechanical modeling of short glass-fiber reinforced thermoplastics-Isotropic damage of pseudograins. 14th International Esaform Conference on Material Forming: Esaform 2011 (Belfast, United Kingdom, 27/04/2011 au 29/04/2011). In: AIP Conference Proceedings, Vol. 1353, p. 972-977 (2011). doi:10.1063/1.3590697.
Pardoen, Thomas ; Scheyvaerts, Florence ; Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Tekoglu, Cihan ; Lecarme, Liza ; Fabrègue, D. ; Onck, P.R.. Micromechanical modelling of void nucleation, growth and coalescence in ductile solids with physics based hardening laws. 1st Cenaero workshop on Damage Tolerant Approaches (Gosselies, Belgium, du 07/09/2011 au 08/09/2011).
Pardoen, Thomas ; Scheyvaerts, Florence ; Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Tekoglu, Cihan ; Lecarme, Liza ; Fabrègue, Damien ; Onck, P.R.. Void growth and coalescence in ductile solids with physics based hardening laws. IAMI & CANMET Workshop - Microstructural effects on damage, fracture and crashworthiness in high performances automotive materials, CANMET - Materials (Hamilton, Ontario, Canada, du 10/05/2011 au 11/05/2011).
Yerra Sampath, Kumar ; Martin, G. ; Willemet, Marie ; Véron, M. ; Bréchet, Yves ; Fourmentin, R. ; Mithieux, J.D. ; Delannay, Laurent ; Pardoen, Thomas. A Numerical study on damage nucleation in duplex stainless steels. Duplex World 2010 Conference (Beaune, France, du 13/10/2010 au 15/10/2010). In: Duplex Stainless Steel- Conference Proceedings, J. Charles ed., 2010, p.1265-1273 ; CD-Rom IV.C.4.
Martin, G. ; Bréchet, Yves ; Véron, M. ; Mithieux, J.D. ; Fourmentin, R. ; Chéhab, B. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas. Caractérisation de l'endommagement à chaud d'un acier inoxydable austéno-ferritique via la détermination du travail essentiel de rupture. Matériaux 2010 (Nantes, France, du 18/10/2010 au 22/10/2010). In: Proceedings of Matériaux 2010, J. Crepin, J.-C. Bernier, S. Lartigue eds, 2010, p. CD-Rom C.7-288.
Martin, G. ; Bréchet, Yves ; Véron, M. ; Mithieux, D. ; Fourmentin, R. ; Chéhab, B. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas. Characterization of the Hot Cracking Resistance using the Concept of the Essential Work of Fracture - Application to Duplex Stainless steels. Journée annuelles de la Société française de Métallurgie et de Matériaux (Paris, France, du 22/06/2010 au 24/06/2010). In: Proceedings of JA 2010, D. Chandesris an R. Alberny eds., 2010, p. CD-Rom T.4-2.
Martin, G. ; Bréchet, Yves ; Véron, M. ; Mithieux, J.D. ; Fourmentin, R. ; Chéhab, B. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas. Characterization of the Hot Cracking Resistance using the Essential Work of Fracture. 10th Stainless Steel Brazilian Conference (Rio de Janeiro, Brazil, du 20/09/2010 au 22/09/2010). In: Proceedings of the 10th Stainless Steel Brazilian Conference, M.C. Rebello, 2010, p. 216-226.
Martin, G. ; Caldemaison, D. ; Bornert, M. ; Pinna, C. ; Véron, M. ; Chéhab, B. ; Fourmentin, R. ; Mithieux, J.D. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas ; Bréchet, Yves. Determination of the high temperature micro-scale strain distribution - Application to Duplex Stainless Steel. Duplex Stainless Steels Conference and Exhibition (Beaune, France, du 13/10/2010 au 15/10/2010). In: Proceedings of the Duplex World 2010, Ed. J. Charles, 2010, CD-Rom IV.C.5.
Pardoen, Thomas ; Coulombier, Michaël ; Boé, A. ; Brugger, Charles ; Colla, Marie-Stéphane ; Delannay, Laurent ; Dancette, Sylvain ; Idrissi, Hosni ; Wang, B. ; Schryvers, D. ; Massart, T.J. ; Raskin, Jean-Pierre. Imperfection and size dependent fracture of thin metallic films. Fifth International Conference on Multiscale Materials Modeling - MMM2010 (Freiburg, Germany, du 04/10/2010 au 08/10/2010). In: Conference proceedings, 2010, p. 243.
Van Houtte, Paul ; Kanjarla, Anand Krishna ; Delannay, Laurent. Modelling Study of Deformation Texture and Plastic Heterogeneity at Grain Boundaries and Triple Junctions. Thermec 2009 (du n/a au n/a). In: Materials Science Forum, Vol. 638-642, p. 190-195 (2010). doi:10.4028/www.scientific.net/MSF.638-642.190.
Logé, Roland ; Resk, Heba ; Sun, Z ; Delannay, Laurent ; Bernacki, Marc. Modelling plastic deformation and recrystallization of polycrystals using digital micro-structures and adaptive meshing techniques. Metal Forming 2010 (Corée, 01/09/2010). In: Steel Research International, Vol. 81, no. 9, p. 1420-1425 (2010).
Delannay, Laurent ; Resk, Heba ; Yerra Sampath, Kumar ; Martin, G. ; Brassart, Laurence ; Willemet, Marie ; Pardoen, Thomas. Multisite modeling of strain heterogeneity in multiphase polycrystals - Evaluation based on CPFEM and experiment. Fifth International Conference on Multiscale Materials Modeling - MMM2010 (Freiburg, Germany, du 04/10/2010 au 08/10/2010). In: Conference proceedings (P. Gumbsch and E. Van der Giessen eds.), 2010, 168.
Yerra Sampath, Kumar ; Tekoglu, Cihan ; Van Bael, A. ; Delannay, Laurent ; Van Houtte, Paul ; Pardoen, Thomas. The Facet-Gurson model for ductile damage process. 18thh European Conference on Fracture (ECF18) (Dresden, Germany, du 30/08/2010 au 03/09/2010). In: Proceedings of the 18th European Conference on Fracture, D. Klingbeil, M. Vormwald, K.-G. Eulitz eds., 2010, p. CD-Rom B.05.3-2.
Hammami, Walid ; Bouvier, Salima ; Duchêne, Laurent ; Delannay, Laurent ; Habraken, Anne-Marie. Crystal plasticity modelling of monotonic shear tests on pure titanium. COMPLAS'09 (Barcelona, 01/09/2010). In: Proceedings of COMPLAS'09, 2009.
Hammami, Walid ; Delannay, Laurent ; Habraken, Anne-Marie ; Duchêne, Laurent. Crystal plasticity prediction of Lankford coefficients using the MULTISITE model: influence of the critical resolved shear stresses. ESAFORM 2009 (Twente, 27/04/2009). In: International Journal of Material Forming, Vol. 2, p. 65-68 (2009). doi:10.1007/s12289-009-0573-y.
Brassart, Laurence ; Doghri, Issam ; Delannay, Laurent. Self-consistent modeling of DP steel incorporating short range interactions. Conférence ESAFORM (Twente, du 27/04/2009 au 29/04/2009). In: International Journal of Material Forming, Vol. 2, no. 0, p. 447-450.
Lecarme, Liza ; Tekoglu, Cihan ; Yerra Sampath, Kumar ; Delannay, Laurent ; Pardoen, Thomas. Strain hardening and viscoplastic effects on void growth and coalescence. Thermec'2009 - International Conference on Processing & Manufacturing of Advanced Materials (Berlin, Germany, du 25/08/2009 au 29/08/2009).
Delannay, Laurent ; Kanjarla, Anand K. ; Melchior, Maxime ; Signorelli, Javier W. ; Van Houtte, Paul. Cpfem investigation of the effect of grain shape on the planar anisotropy and the shear banding of textured metal sheets. ICOTOM (Carnegie Mellon University, du 02/06/2008 au 06/06/2008). In: Ceramic Transactions - Applications of Texture Analysis, Vol. 201, no. 0, p. 745-756 (07/11/2008). doi:10.1002/9780470444214.ch79.
Delannay, Laurent ; Jacques, Pascal ; Dejaeger, Kevin ; Sablin, Simon-Serge. Evaluation of two mutliscale models for the simulation of cross-die forming of DP steel. ESAFORM'08 (Lyon, 21/04/2008). In: International Journal of Material Forming, Vol. 1, no. 1, p. 65-68 (2008).
Kanjarla, Anand K. ; Delannay, Laurent ; Van Houtte, Paul. Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures. ICOTOM (Carnegie Mellon University, du 02/06/2008 au 06/06/2008). In: CERAMIC TRANSACTIONS - Materials Processing and Texture, Vol. 200, no. 0, p. 721-730 (07/11/2008). doi:10.1002/9780470444191.ch81.
Van Houtte, Paul ; Kanjarla, Anand ; Seefeldt, Marc ; Delannay, Laurent. Crystal fragmentation at large plastic strains. Physics and Mechanics of Large Plastic Strains (St Petersburg, du 04/06/2007 au 09/06/2007). In: Problems of Materials Science, Vol. 52, no. 4, p. 7-12 (2007).
Melchior, Maxime ; Remacle, Jean-François ; Delannay, Laurent. Crystal-plasticity-based FE modelling of a dual-phase microstructure in which grains have non-uniform shape and size. In: AIP Conference Proceedings, Vol. 908, no. 1, p. 381-386 (2007). doi:10.1063/1.2740841.
Ouaar, Amine ; Doghri, Issam ; Delannay, Laurent ; Thimus, Jean-François. Micromechanics of the deformation and damage of steel fiber-reinforced concrete. International Congress of Theroretical and Applied Mechanics (ICTAM) (Warsaw(Poland), Aug 15-21, 2004). In: International Journal of Damage Mechanics, Vol. 16, no. 2, p. 227-260 (2007). doi:10.1177/1056789506064946.
Loge, R.E. ; Beringhier, M. ; Chastel, Y.B. ; Delannay, Laurent. Reducing computational cost and allowing automatic remeshing in FEM models of metal forming coupled with polycrystal plasticity. Numiform 2007 (Porto, 02/06/2007). In: AIP Conference Proceedings, Vol. 908, no. 1, p. 387-392 (2007). doi:10.1063/1.2740842.
Melchior, M.A. ; Delannay, Laurent ; Iker, Mathieu ; Godet, Stéphane ; Jacques, Pascal. Crystal plasticity modeling of texture development and hardening of TWIP steel. 45th annual conference of metallurgists of CIM (Montreal, 2006). In: Proceedings of the International Symposium on Advanced Steels, 2006, p. 377-384.
Melchior, Maxime ; Iker, Mathieu ; Godet, Stéphane ; Jacques, Pascal ; Delannay, Laurent. Crystal plasticity modeling of twinning induced plasticity in steels. 7th National Congress on theoretical and applied Mechanics - NCTAM 2006 (Mons, 2006). In: Proceedings of 7th National Congress on theoretical and applied Mechanics, 2006, p. (CD-ROM) SOLI-8(141).
Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas. Micro-Macro modelling of the plastic flow of trip-assisted multiphase steel. 12th International Symposium on Plasticity and its Applications (Halifax, Canada, July 17-22). In: Proceedings of the 12th International Symposium on Plasticity and its Applications, 2006, p. 253-255.
Van Houtte, Paul ; Kanjarla, Anand Krishna ; Van Bael, Albert ; Seefeldt, Marc ; Delannay, Laurent. Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials. 6th Euromech Solid Mechanics Conference (Budapest Univ Technol & Econ, Budapest(Hungary), Aug 28-sep 01, 2006). In: European Journal of Mechanics A - Solids, Vol. 25, no. 4, p. 634-648 (2006). doi:10.1016/j.euromechsol.2006.05.003.
Jacques, Pascal ; Pardoen, Thomas ; Delannay, Laurent ; Lacroix, Gauthier ; Delannay, Francis. Critical Assessment of the Plasticity and Fracture Properties of TRIP-assistedMultiphase Steels. JSI2005 (2005). In: La revue de Métallurgie -ATS , 2005, p. 152-153.
Delannay, Laurent ; Lani, Frédéric ; Jacques, Pascal ; Pardoen, Thomas. Micro-macro modeling and simulation of forming processes of TRIP-assisted multiphase steel. ATS - JSI 2005 (2005). In: La revue de Métallurgie - ATS - JSI2005, L. Devillers, 2005, 162-163.
Delannay, Laurent ; Lani, Frédéric ; Van Rompaey, T. ; Pardoen, Thomas ; Delannay, Francis. Modeling of the plastic deformation of multiphase metallic alloys with account of phase percolation and phase transition. Plasticity'05 (Fulton, Maryland, 2005). In: Proceedings , Neat Press, 2005, p. 478-480.
Lani, Frédéric ; Delannay, Laurent ; Furnemont, Quentin ; Jacques, Pascal ; Pardoen, Thomas. On the stress-dependence of the TRIP-effect in multiphase steels. 8th ESAFORM Conference on material forming (Cluj, Romania, 2008). In: Proceedings of the 8th ESAFORM Conference on material forming, 2005, p. 225-228.
Delannay, Laurent ; Beringhier, M. ; Chastel, Y. ; Loge, RE. Simulation of cup-drawing based on crystal plasticity applied to reduced grain samplings. 14th International Conference on Textures of Materials (Leuven(Belgium), Jul 11-15, 2005). In: Materials Science Forum, Vol. 495-497, p. 1639-1644 (2005).
Delannay, Laurent ; Lani, Frédéric ; Jacques, Pascal. Simulation of deep-drawing of TRIP-assisted multiphase steel based on a micro-macro modelling. International Deep Drawing Research Group IDDRG 2005, June 20-22 2005, Besançon, France (Besançon, France, du 20/06/2005 au 22/06/2005).
Van Houtte, Paul ; Van Bael, A ; Seefeldt, M ; Delannay, Laurent. The application of multiscale modelling for the prediction of plastic anisotropy and deformation textures. 14th International Conference on Textures of Materials (Leuven(Belgium), Jul 11-15, 2005). In: Materials Science Forum, Vol. 495-497, p. 31-41 (2005).
Delannay, Laurent ; Doghri, Issam ; Lani, Frédéric ; Van Rompaey, T. ; Jacques, Pascal ; Pardoen, Thomas. Multiscale constitutive model for the simulation of forming operations on TRIP-assisted multiphase steel. 7th Esaform Conference Material Forming (Trondheim, du 28 April 2004 au 30 April 2004). In: Proceedings of the 7th Esaform Conference Material Forming, 2004, p. 127-130.