Article de journal
Kuypers, B., Stevens, N., Hessels, C., Jacques, P., Finotello, G., & Choisez, L. (2026). Hydrogen-based direct reduction of steel by-product mill scale. International Journal of Hydrogen Energy, 221, 154185. https://doi.org/10.1016/j.ijhydene.2026.154185 (Original work published 2026)
Hilhorst, A., Miotti Bettanini, A., Callahan, M., & Jacques, P. (2026). On the precipitation during age hardening of CoCrFeMnNi with Al and Ti additions. Journal of Alloys and Compounds, 1050, 185757. https://doi.org/10.1016/j.jallcom.2025.185757 (Original work published 2026)
Article de journal
Delcroix, M., Roy, G., van der Rest, C., Marchal-Marchant, V., & Jacques, P. (2025). Processing of Thermoelectric Fe2VAl Heusler-compounds by laser powder bed fusion: From single scan tracks to bulk material. Additive Manufacturing Letters, 14(100305), 1-11. https://doi.org/10.1016/j.addlet.2025.100305 (Original work published 2025)
Heremans, T., Perlade, A., Jacques, P., & Pardoen, T. (2025). Alternating ductile and brittle cracking mode in medium manganese steel sheets. Scripta Materialia, 257, 116450. https://doi.org/10.1016/j.scriptamat.2024.116450 (Original work published 2025)
Leyssens, L., El Aazmani, W., Balcaen, T., Jacques, P., Horman, S., Goldman, J., & Kerckhofs, G. (2025). MicroCT and contrast-enhanced microCT to study the in vivo degradation behavior and biocompatibility of candidate metallic intravascular stent materials. Acta Biomaterialia, 191, 53-65. https://doi.org/10.1016/j.actbio.2024.11.017 (Original work published 2025)
Bruyr, Z., Choisez, L., Thijs, L. C., Mi, X. C., Jacques, P., Fabien, H., & Contino, F. (2025). Combustion of a single iron-based impure particle: numerical analysis of four non-volatile oxide impurities using a parametric approach. Fuel : the science and technology of fuel and energy, 407(A), 137277. https://doi.org/10.1016/j.fuel.2025.137277 (Original work published 2026)
Article de journal
Choisez, L., Marie-Aline Van Ende, Bruyr, Z., Contino, F., & Jacques, P. (2024). Influence of impurities on the use of Fe-based powder as sustainable fuel. Philosophical Transations A, 382, 20230236. https://doi.org/10.1098/rsta.2023.0236 (Original work published 2024)
Krid, M., Mandy, M., Sturel, T., Grigorieva, R., Drillet, P., & Jacques, P. (2024). A better understanding of hydrogen trapping and diffusion in aluminized press-hardenable steels. Journal of Materials Research and Technology, 28, 1514-1522. https://doi.org/10.1016/j.jmrt.2023.11.214 (Original work published 2024)
Lai, Q., Chang, S., Wei, Y., Wu, S., Jacques, P., Pardoen, T., & Fan, G. (2024). Impact of ε-martensite on the fracture resistance of high-Mn steels. Materials Research Letters, 12(10), 700-708. https://doi.org/10.1080/21663831.2024.2372082 (Original work published 2024)
Coffigniez, M., De Breuck, P.-P., Choisez, L., Marteleur, M., van Setten, M., Petretto, G., Rignanese, G.-M., & Jacques, P. (2024). Combination of ab initio descriptors and machine learning approach for the prediction of the plasticity mechanisms in β-metastable Ti alloys. Materials & Design, 239, 112801. https://doi.org/10.1016/j.matdes.2024.112801 (Original work published 2024)
Leyssens, L., Lapraille, N., Pyka, G., Jacques, P., Horman, S., Goldman, J., & Kerckhofs, G. (2024). Exploring the biodegradability of candidate metallic intravascular stent materials using X-ray microfocus computed tomography: An in vitro study. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 112(8), e35452. https://doi.org/10.1002/jbm.b.35452 (Original work published 2024)
Croonenborghs, M., Ismail, K., Mousny, M., Delannay, L., Everaerts, J., Korsunsky, A. M., Jacques, P., Pardoen, T., & et al. (2024). Residual Stresses in Surgical Growing Rods. Journal of Biomechanical Engineering, 14(1), 11003. https://doi.org/10.1115/1.4063745 (Original work published 2024)
Gerdt, L., Hilhorst, A., Müller, M., Heidowitzsch, M., Kaspar, J., Lopez, E., Zimmermann, M., & Jacques, P. (2024). Tuning the Microstructure and Mechanical Properties of Al-Co-Cr-Fe-Ni-Ti Compositionally Complex Alloys Manufactured by Means of L-DED. Journal of Thermal Spray Technology, Online. https://doi.org/10.1007/s11666-024-01902-4 (Original work published 2024)
Article de journal
Hilhorst, A., Jacques, P., & Pardoen, T. (2023). Towards the best strength, ductility, and toughness combination: High entropy alloys are excellent, stainless steels are exceptional. Acta Materialia, 260, 119280. https://doi.org/10.1016/j.actamat.2023.119280 (Original work published 2023)
Duchaussoy, A., Marteleur, M., Jacques, P., & Choisez, L. (2023). Improved mechanical properties of β metastable Ti alloys processed by laser powder bed fusion. Materials Science and Engineering: A, 887, 145755. https://doi.org/10.1016/j.msea.2023.145755 (Original work published 2023)
Chen, W., Hilhorst, A., Bokas, G., Gorsse, S., Jacques, P., & Hautier, G. (2023). A map of single-phase high-entropy alloys. Nature Communications, 14(1), 2856. https://doi.org/10.1038/s41467-023-38423-7 (Original work published 2023)
Kaspar, J., Hilhorst, A., Gerdt, L., Müller, M., Heidowitzsch, M., Kuczyk, M., Bettanini, A. M., Jacques, P., Zimmermann, M., & Leyens, C. (2023). Combinatorial Alloy Design and Microstructure Evolution in Laser-cladded Al–Co–Cr–Fe–Ni–Ti Compositionally Complex Alloys. High Entropy Alloys & Materials, online. https://doi.org/10.1007/s44210-023-00023-x (Original work published 2023)
Article de journal
Lai, Q., Yang, H., Wei, Y., Zhou, H., Xiao, L., Ying, H., Lan, S., You, Z., Kou, Z., Feng, T., Lu, Q., Jacques, P., & Pardoen, T. (2022). Transformation plasticity in high strength, ductile ultrafine-grained FeMn alloy processed by heavy ausforming. International Journal of Plasticity, 148, 103151. https://doi.org/10.1016/j.ijplas.2021.103151 (Original work published 2022)
Hilhorst, A., Pardoen, T., & Jacques, P. (2022). Optimisation of the essential work of fracture method for characterization of the fracture resistance of metallic sheets. Engineering Fracture Mechanics, 268, 108442. https://doi.org/10.1016/j.engfracmech.2022.108442 (Original work published 2022)
Choisez, L., Ding, L., Marteleur, M., Kashiwar, A., Idrissi, H., & Jacques, P. (2022). Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy. Acta Materialia, 235, 118088. (Original work published 2022)
Choisez, L., Ding, L., Marteleur, M., Kashiwar, A., Idrissi, H., & Jacques, P. (2022). Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of beta-metastable Ti-12 wt.% Mo alloy. Acta Materialia, 235(118088), 118088. https://doi.org/10.1016/j.actamat.2022.118088 (Original work published 2022)
Ding, L., Hilhorst, A., Idrissi, H., & Jacques, P. (2022). Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy. Acta Materialia, 234, 118049. https://doi.org/10.1016/j.actamat.2022.118049 (Original work published 2022)
Hilhorst, A., Leclerc, J., Pardoen, T., Jacques, P., Noels, L., & Nguyen, V. D. (2022). Ductile fracture of high entropy alloys: From the design of an experimental campaign to the development of a micromechanics-based modeling framework. Engineering Fracture Mechanics, 275, 108844. https://doi.org/10.1016/j.engfracmech.2022.108844 (Original work published 2022)
Article de journal
Ismail, K., Perlade, A., Jacques, P., & Pardoen, T. (2021). Outstanding cracking resistance of fibrous dual phase steels. Acta Materialia, 207, 116700. https://doi.org/10.1016/j.actamat.2021.116700 (Original work published 2021)
Franceschi, M., Miotti Bettanini, A., Pezzato, L., Dabalà, M., & Jacques, P. (2021). Effect of Multi-Step Austempering Treatment on the Microstructure and Mechanical Properties of a High Silicon Carbide-Free Bainitic Steel with Bimodal Bainite Distribution. Metals, 11(12), 2055. https://doi.org/10.3390/met11122055 (Original work published 2021)
Choisez, L., Roy, G., & Jacques, P. (2021). Temperature rise up to melting under quasi-static loading conditions induced by adiabatic shear banding. Materials in Engineering, 212, 110269. https://doi.org/10.1016/j.matdes.2021.110269 (Original work published 2021)
Poncelet, O., Marteleur, M., van der Rest, C., Rigo, O., Adrien, J., Dancette, S., Jacques, P., & Simar, A. (2021). Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion. Additive Manufacturing, 38, 101801. https://doi.org/10.1016/j.addma.2020.101801 (Original work published 2021)
Sapanathan, T., Sabirov, I., Xia, P., Monclus, M., Molina-Aldareguia, J. M., Jacques, P., & Simar, A. (2021). High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. Scripta Materialia, 200(113910). https://doi.org/10.1016/j.scriptamat.2021.113910 (Original work published 2021)
Hilhorst, A., & Jacques, P. (2021). Diffusion Multiples as a Tool to Efficiently Explore the Composition Space of High Entropy Alloys. Journal of Phase Equilibria and Diffusion, online. https://doi.org/10.1007/s11669-021-00902-z (Original work published 2021)
Zuo, X., Miotti Bettanini, A., Hilhorst, A., Jacques, P., & Moelans, N. (2021). Influence of 5 at.%Al-Additions on the FCC to BCC Phase Transformation in CrFeNi Concentrated Alloys. Journal of Phase Equilibria and Diffusion, 42, 794-813. https://doi.org/10.1007/s11669-021-00924-7 (Original work published 2021)
Jiménez Mena, N., Sapanathan, T., Jacques, P., & Simar, A. (2021). Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds. Engineering Fracture Mechanics, 249(107756). https://doi.org/10.1016/j.engfracmech.2021.107756 (Original work published 2021)
Ribesse, A., Ismail, K., Croonenborghs, M., Irda, N., Miladi, L., Jacques, P., Mousny, M., & Pardoen, T. (2021). Fracture mechanisms in Ti and Co–Cr growing rods and impact on clinical practice. Journal of the Mechanical Behavior of Biomedical Materials, 121, 104620. https://doi.org/10.1016/j.jmbbm.2021.104620 (Original work published 2021)
Choisez, L., Elmahdy, A., Verleysen, P., & Jacques, P. (2021). Fracture mechanisms in flat and cylindrical tensile specimens of TRIP-TWIP β-metastable Ti-12Mo alloy. Acta Materialia, 220, 117294. https://doi.org/10.1016/j.actamat.2021.117294 (Original work published 2021)
Bokas, G., Chen, W., Hilhorst, A., Jacques, P., Gorsse, S., & Hautier, G. (2021). Unveiling the thermodynamic driving forces for high entropy alloys formation through big data ab initio analysis. Scripta Materialia, 202, 114000. https://doi.org/10.1016/j.scriptamat.2021.114000 (Original work published 2021)
Article de journal
van der Rest, C., Dupont, V., Erauw, J.-P., & Jacques, P. (2020). On the reactive sintering of Heusler Fe2VAl-based thermoelectric compounds. Intermetallics, 125, 106890. https://doi.org/10.1016/j.intermet.2020.106890 (Original work published 2020)
Scarcello, E., Lambremont, A., Vanbever, R., Jacques, P., & Lison, D. (2020). Mind your assays: Misleading cytotoxicity with the WST-1 assay in the presence of manganese. PLoS One, 15(4), e0231634 [1-14]. https://doi.org/10.1371/journal.pone.0231634 (Original work published 2020)
Xiong, Z., Jacques, P., Perlade, A., & Pardoen, T. (2020). On the sensitivity of fracture mechanism to stress concentration configuration in a two-step quenching and partitioning steel. International Journal of Fracture, 224(1), 101-116. https://doi.org/10.1007/s10704-020-00448-0 (Original work published 2020)
Scarcello, E., Lobysheva, I., Bouzin, C., Jacques, P., Lison, D., & Dessy, C. (2020). Endothelial dysfunction induced by hydroxyl radicals – the hidden face of biodegradable Fe-based materials for coronary stents. Materials science & engineering. C, Materials for biological applications, 112, 110938 [1-11]. https://doi.org/10.1016/j.msec.2020.110938 (Original work published 2020)
Scarcello, E., Herpain, A., Tomatis, M., Turci, F., Jacques, P., & Lison, D. (2020). Hydroxyl radicals and oxidative stress: the dark side of Fe corrosion. Colloids and Surfaces B: Biointerfaces, 185, 110542 [1-9]. https://doi.org/10.1016/j.colsurfb.2019.110542 (Original work published 2020)
Choisez, L., Ding, L., Marteleur, M., Idrissi, H., Pardoen, T., & Jacques, P. (2020). High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy. Nature Communications, 11(1), 2110. https://doi.org/10.1038/s41467-020-15772-1 (Original work published 2020)
Article de journal
Xiong, Z., Jacques, P., Perlade, A., & Pardoen, T. (2019). Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50, 3502-3513. https://doi.org/10.1007/s11661-019-05265-2 (Original work published 2019)
Miotti Bettanini, A., Ding, L., Mithieux, J.-D., Parrens, C., Idrissi, H., Schryvers, D., Delannay, L., Pardoen, T., & Jacques, P. (2019). Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel. Materials & Design, 162, 362-374. https://doi.org/10.1016/j.matdes.2018.12.005 (Original work published 2019)
Marteleur, M., Idrissi, H., Amin-Ahmadi, B., Prima, F., Schryvers, D., & Jacques, P. (2019). On the nucleation mechanism of {112}〈111〉mechanical twins in as-quenched β metastable Ti-12 wt.% Mo alloy. Materialia, 7, 100418. https://doi.org/10.1016/j.mtla.2019.100418 (Original work published 2019)
Roy, G., van der Rest, C., Heymans, S., Quintin, E., Dupont, V., Erauw, J.-P., Schmitz, A., & Jacques, P. (2019). Global Analysis of Influence of Contacts on Heusler-Based Thermoelectric Modules. Journal of Electronic Materials, 48(9), 5390-5402. https://doi.org/10.1007/s11664-019-07137-2 (Original work published 2019)
Verhaegen, C., Lepropre, S., Octave, M., Brusa, D., Bertrand, L., Beauloye, C., Jacques, P., Kefer, J., & Horman, S. (2019). Bioreactivity of Stent Material: In Vitro Impact of New Twinning-Induced Plasticity Steel on Platelet Activation. Journal of Biomaterials and Nanobiotechnology, 10(04), 175-189. https://doi.org/10.4236/jbnb.2019.104010 (Original work published 2019)
Santos Macias, J. G., Elangeswaran, C., Zhao, L., Van Hooreweder, B., Adrien, J., Maire, E., Buffière, J.-Y., Ludwig, W., Jacques, P., & Simar, A. (2019). Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing. Scripta Materialia, 170, 124-128. https://doi.org/10.1016/j.scriptamat.2019.05.044 (Original work published 2019)
Jimenez-Mena, N., Jacques, P., Ding, L., Gauquelin, N., Schryvers, D., Idrissi, H., Delannay, F., & Simar, A. (2019). Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers. Materials Science and Engineering: A, 740-741, 274-284. https://doi.org/10.1016/j.msea.2018.10.101 (Original work published 2019)
Ismail, K., Perlade, A., Jacques, P., Pardoen, T., & Brassart, L. (2019). Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels. International Journal of Plasticity, 118, 130-146. https://doi.org/10.1016/j.ijplas.2019.02.005 (Original work published 2019)
Mandy, M., Georges, C., Sturel, T., Drillet, P., & Jacques, P. (2019). On the analysis of the simultaneous uptake and desorption of different isotopes of gaseous hydrogen by advanced high strength steels. Scripta Materialia, 161, 84-87. https://doi.org/10.1016/j.scriptamat.2018.09.034 (Original work published 2019)
Jimenez mena, N., Sapanathan, T., Drezet, J.-M., Pirling, T., Jacques, P., & Simar, A. (2019). Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction. Journal of Materials Processing Technology, 266, 651-661. https://doi.org/10.1016/j.jmatprotec.2018.11.030 (Original work published 2019)
Jimenez-Mena, N., Simar, A., & Jacques, P. (2019). On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers. Materials & Design, 180, 107958. https://doi.org/10.1016/j.matdes.2019.107958 (Original work published 2019)
Article de journal
Xiong, Z., Jacques, P., Perlade, A., & Pardoen, T. (2018). Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel. Scripta Materialia, 157, 6-9. https://doi.org/10.1016/j.scriptamat.2018.07.030 (Original work published 2018)
van der Rest, C., Schmitz, A., & Jacques, P. (2018). On the characterisation of antisite defects and ordering in off-stoichiometric Fe 2 VAl-based Heusler compounds by X-ray anomalous diffraction. Acta Materialia, 142, 193-200. https://doi.org/10.1016/j.actamat.2017.09.024 (Original work published 2018)
Miotti Bettanini, A., Hannard, F., Jacques, P., Pardoen, T., Guilleume, B., Mithieux, J. D., & Delannay, L. (2018). Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 731, 495-505. https://doi.org/10.1016/j.msea.2018.06.012 (Original work published 2018)
Jimenez Mena, N., Jacques, P., Drezet, J.-M., & Simar, A. (2018). On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49(7), 2692-2704. https://doi.org/10.1007/s11661-018-4618-z (Original work published 2018)
Lin, F., Marteleur, M., Jacques, P., & Delannay, L. (2018). Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. International Journal of Plasticity, 105, 195-210. https://doi.org/10.1016/j.ijplas.2018.02.012 (Original work published 2018)
Article de journal
Sun, F., Zhang, J. Y., Vermaut, P., Choudhuri, D., Alam, T., Mantri, S. A., Svec, P., Gloriant, T., Jacques, P., Banerjee, R., & Prima, F. (2017). Strengthening strategy for a ductile metastableβ-titanium alloy using low-temperature aging. Materials Research Letters, 5(8), 547-553. https://doi.org/10.1080/21663831.2017.1350211 (Original work published 2017)
Delroisse, P., Jacques, P., Maire, E., Rigo, O., & Simar, A. (2017). Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. Scripta Materialia, 141, 32-35. https://doi.org/10.1016/j.scriptamat.2017.07.020 (Original work published 2017)
Hatami, M. K., Pardoen, T., Lacroix, G., Berke, P., Jacques, P., & Massart, T. J. (2017). Towards ultra-high ductility TRIP-assisted multiphase steels controlled by strain gradient plasticity effects. Journal of the Mechanics and Physics of Solids, 98, 201-221. https://doi.org/10.1016/j.jmps.2016.09.006 (Original work published 2017)
Miotti Bettanini, A., Delannay, L., Jacques, P., Pardoen, T., Badinier, G., & Mithieux, J.-D. (2017). Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel. A I P Conference Proceedings, 1896, 20010. https://doi.org/10.1063/1.5007967 (Original work published 2017)
Alkorta, J., Marteleur, M., & Jacques, P. (2017). Improved simulation based HR-EBSD procedure using image gradient based DIC techniques. Ultramicroscopy, 182, 17-27. https://doi.org/10.1016/j.ultramic.2017.06.015 (Original work published 2017)
Lin, F., Marteleur, M., Alkorta, J., Jacques, P., & Delannay, L. (2017). Local stress field induced by twinning in a metastable beta-titanium alloy. IOP Conference Series: Materials Science and Engineering, 219, 12031. https://doi.org/10.1088/1757-899X/219/1/012031 (Original work published 2017)
Article de journal
Kalbfleisch, A.-S., Matthews, G., & Jacques, P. (2016). On the influence of the cooling rate on the martensitic transformation of Ni–Mn–Sn Heusler alloys. Scripta Materialia, 114, 121-124. https://doi.org/10.1016/j.scriptamat.2015.12.005 (Original work published 2016)
Brozek, C., Sun, F., Vermaut, P., Millet, C., Lenain, A., Embury, D., Jacques, P., & Prima, F. (2016). A Beta-titanium alloy with extra high strain-hardening rate: Design and mechanical properties. Scripta Materialia, 114, 60-64. https://doi.org/10.1016/j.scriptamat.2015.11.020 (Original work published 2016)
Lai, Q., Gouné, M., Perlade, A., Pardoen, T., Jacques, P., Bouaziz, O., & Bréchet, Y. (2016). Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 47(7), 3375-3386. https://doi.org/10.1007/s11661-016-3547-y (Original work published 2016)
Article de journal
Godet, S., & Jacques, P. (2015). Beneficial influence of an intercritically rolled recovered ferritic matrix on the mechanical properties of TRIP-assisted multiphase steels. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 645, 20-27. https://doi.org/10.1016/j.msea.2015.07.082 (Original work published 2015)
Ben Bettaieb, M., Van Hoof, T., Minnebo, H., Pardoen, T., Dufour, P., Jacques, P., & Habraken, A.-M. (2015). Micromechanics-Based Damage Analysis of Fracture in Ti5553 Alloy with Application to Bolted Sectors. Journal of Materials Engineering and Performance, 24(3), 1262-1278. https://doi.org/10.1007/s11665-015-1383-7 (Original work published 2015)
Crucifix, S., van der Rest, C., Jimenez Mena, N., Jacques, P., & Simar, A. (2015). Modelling thermal cycles and intermetallic growth during friction melt bonding of ULC steel to aluminium alloy 2024-T3. Science and Technology of Welding and Joining (Print), 20(4), 319-324. https://doi.org/10.1179/1362171815Y.0000000020 (Original work published 2015)
F. Sun, Jacques, P., Marteleur, M., C. Brozek, E.F. Rauch, M. Véron, P. Vermaut, Jacques, P., & F. Prima. (2015). A new titanium alloy with a combination of high strength, high strain hardening and improved ductility. Scripta Materialia, 94(1), 17-20. https://doi.org/10.1016/j.scriptamat.2014.09.005 (Original work published 2015)
Article de journal
van der Rest, C., Jacques, P., & Simar, A. (2014). On the joining of steel and aluminium by means of a new friction melt bonding process. Scripta Materialia, 77, 25-28. https://doi.org/10.1016/j.scriptamat.2014.01.008 (Original work published 2014)
Favache, A., Libralesso, L., Jacques, P., Raskin, J.-P., Bailly, C., Nysten, B., & Pardoen, T. (2014). Fracture toughness measurement of ultra-thin hard films deposited on a polymer. Thin Solid Films, 550(1), 464-471. https://doi.org/10.1016/j.tsf.2013.10.052 (Original work published 2014)
Pierman, A.-P., Bouaziz, O., Pardoen, T., Jacques, P., & Brassart, L. (2014). The influence of microstructure and composition on the plastic behaviour of dual-phase steels. Acta Materialia, 73, 298-311. https://doi.org/10.1016/j.actamat.2014.04.015 (Original work published 2014)
Debehets, J., Tacq, J., Favache, A., Jacques, P., Seo, J. W., Verlinden, B., & Seefeldt, M. (2014). Analysis of the variation in nanohardness of pearlitic steel: Influence of the interplay between ferrite crystal orientation and cementite morphology. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 616, 99-106. https://doi.org/10.1016/j.msea.2014.08.019 (Original work published 2014)
Bettaieb, M. B., Hoof, T. V., Pardoen, T., Dufour, P., Lenain, A., Jacques, P., & Habraken, A. M. (2014). On the elasto-viscoplastic behavior of the Ti5553 alloy. Materials Science & Engineering A, 617, 97-109. https://doi.org/10.1016/j.msea.2014.08.055 (Original work published 2014)
Article de journal
Roy, G., Matagne, E., & Jacques, P. (2013). A Global Design Approach for Large-Scale Thermoelectric Energy Harvesting Systems. Journal of Electronic Materials, 42(7), 1781-1788. https://doi.org/10.1007/s11664-012-2430-x (Original work published 2013)
Sun, F., Zhang, J. Y., Marteleur, M., Gloriant, T., Vermaut, P., Laillé, D., Castany, P., Curfs, C., Jacques, P., & Prima, F. (2013). Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects. Acta Materialia, 61(17), 6406-6417. https://doi.org/10.1016/j.actamat.2013.07.019 (Original work published 2013)
Galceran, M., Albou, A., Renard, K., Coulombier, M., Jacques, P., & Godet, S. (2013). Automatic Crystallographic Characterization in a Transmission Electron Microscope: Applications to Twinning Induced Plasticity Steels and Al Thin Films. Microscopy and Microanalysis, 19(3), 693-697. https://doi.org/10.1017/S1431927613000445 (Original work published 2013)
Albou, A., Galceran, M., Renard, K., Godet, S., & Jacques, P. (2013). Nanoscale characterization of the evolution of the twin-matrix orientation in Fe-Mn-C twinning-induced plasticity steel by means of transmission electron microscopy orientation mapping. Scripta Materialia, 68(6), 400-403. https://doi.org/10.1016/j.scriptamat.2012.10.052 (Original work published 2013)
Idrissi, H., Renard, K., Schryvers, D., & Jacques, P. (2013). TEM investigation of the formation mechanism of deformation twins in Fe-Mn-Si-Al TWIP steels. Philosophical Magazine, 93(35), 4378-4391. https://doi.org/10.1080/14786435.2013.832837 (Original work published 2013)
Brevet
Jacques, P., van der Rest, C., & Simar, A. (2013). Method for Welding at least two layers (Patent No. PCT/EP2013/058844).
Jacques, P., Simar, A., van der Rest, C., Matagne, E., Roy, G., & Shmitz, A. (2013). Thermoelectric conversion module and method for making it (Patent No. PCT/EP2013/058897).
Article de journal
Marteleur, M., Sun, F., Gloriant, T., Vermaut, P., Jacques, P., & Prima, F. (2012). On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects. Scripta Materialia, 66(10), 749-752. https://doi.org/10.1016/j.scriptamat.2012.01.049 (Original work published 2012)
Renard, K., & Jacques, P. (2012). On the relationship between work hardening and twinning rate in TWIP steels. Materials Science and Engineering A, 542, 8-14. https://doi.org/10.1016/j.msea.2012.01.123 (Original work published 2012)
Renard, K., Idrissi, H., Schryvers, D., & Jacques, P. (2012). On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels. Scripta Materialia, 66(12), 966-971. https://doi.org/10.1016/j.scriptamat.2012.01.063 (Original work published 2012)
Renard, K., Idrissi, H., Schryvers, D., & Jacques, P. (2012). Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels. Steel Research International, 83(4), 385-390. https://doi.org/10.1002/srin.201100312 (Original work published 2012)
Maréchal, D., Sinclair, C. W., Dufour, P., Jacques, P., & Mithieux, J.-D. (2012). In-situ measurements of load partitioning in a metastable austenitic stainless steel: Neutron and magnetomechanical measurements. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43(12), 4601-4609. https://doi.org/10.1007/s11661-012-1258-6 (Original work published 2012)
Prima, F., Sun, F., Vermaut, P., Gloriant, T., Mantovani, D., & Jacques, P. (2012). High Performance Beta Titanium Alloys as a New Material Perspective for Cardiovascular Applications. Materials Science Forum, 706-709, 578-583. https://doi.org/10.4028/www.scientific.net/MSF.706-709.578 (Original work published 2012)
Dancette, S., Delannay, L., Renard, K., Melchior, M., & Jacques, P. (2012). Crystal plasticity modeling of texture development and hardening in TWIP steels. Acta Materialia, 60(5), 2135-2145. https://doi.org/10.1016/j.actamat.2012.01.015 (Original work published 2012)
Article de journal
Dancette, S., Melchior, M., Delannay, L., Renard, K., & Jacques, P. (2011). Strain heterogeneity and local anisotropy in TWIP steels. A I P Conference Proceedings, 1353, 145-150. https://doi.org/10.1063/1.3589506 (Original work published 2011)
Sun, F., Gloriant, T., Vermaut, P., Jacques, P., & Prima, F. (2011). Beta titanium alloys with very high ductility induced by complex deformation mechanisms: A new material perspective for coronary stent applications. Solid State Phenomena, 172-174, 129-134. https://doi.org/10.4028/www.scientific.net/SSP.172-174.129 (Original work published 2011)
Malet, L., Sinclair, C. W., Jacques, P., & Godet, S. (2011). Grain scale analysis of variant selection during the gamma-epsilon-alpha’ phase transformation in austenitic steels. Solid State Phenomena, 172-174, 84-89. https://doi.org/10.4028/www.scientific.net/SSP.172-174.84 (Original work published 2011)
Article de journal
Idrissi, H., Renard, K., Ryelandt, L., Schryvers, D., & Jacques, P. (2010). On the mechanism of twin formation in Fe-Mn-C TWIP steels. Acta Materialia, 58(7), 2464-2476. https://doi.org/10.1016/j.actamat.2009.12.032 (Original work published 2010)
Malet, L., Jacques, P., & Godet, S. (2010). Quantitative analysis of variant selection and orientation relationships during the y-to-a phase transformation in hot-rolled TRIP steels. Advanced Materials Research, 89-91, 359-364. https://doi.org/10.4028/www.scientific.net/AMR.89-91.359 (Original work published 2010)
Renard, K., Ryelandt, S., & Jacques, P. (2010). Characterisation of the Portevin-Le Chatelier effect affecting an austenitic TWIP steel based on digital image correlation. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527(12), 2969-2977. https://doi.org/10.1016/j.msea.2010.01.037 (Original work published 2010)
Nakano, J., & Jacques, P. (2010). Effects of the thermodynamic parameters of the hcp phase on the stacking fault energy calculations in the Fe-Mn and Fe-Mn-C systems. CALPHAD : the international research journal for calculation of phase diagrams, 34(2), 167-175. https://doi.org/10.1016/j.calphad.2010.02.001 (Original work published 2010)
Chehab, B., Brechet, Y., Veron, M., Jacques, P., Parry, G., Mithieux, J.-D., Glez, J.-C., & Pardoen, T. (2010). Micromechanics of high-temperature damage in dual-phase stainless steel. Acta Materialia, 58(2), 626-637. https://doi.org/10.1016/j.actamat.2009.09.041 (Original work published 2010)
Idrissi, H., Renard, K., Schryvers, D., & Jacques, P. (2010). On the relationship between the twin internal structure and the work-hardening rate of TWIP steels. Scripta Materialia, 63(10), 961-964. https://doi.org/10.1016/j.scriptamat.2010.07.016 (Original work published 2010)
Article de journal
Malet, L., Barnett, M. R., Jacques, P., & Godet, S. (2009). Variant selection during the gamma-to-alpha(b) phase transformation in hot-rolled bainitic TRIP-aided steels. Scripta Materialia, 61(5), 520-523. https://doi.org/10.1016/j.scriptamat.2009.05.015 (Original work published 2009)
Delannay, L., Pierman, A.-P., & Jacques, P. (2009). Assessment of a Micro-Macro Modeling of the Bending and Unbending of Multiphase Steel Sheets. Advanced Engineering Materials, 11(3), 148-152. https://doi.org/10.1002/adem.200800288 (Original work published 2009)
Jacques, P., Allain, S., Bouaziz, O., De, A., Gourgues, A.-F., Hance, B. M., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S. E., Radu, M., Samek, L., Speer, J., Zhao, L., & van der Zwaag, S. (2009). On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques. Materials Science and Technology, 25(5), 567-574. https://doi.org/10.1179/174328408X353723 (Original work published 2009)
Idrissi, H., Ryelandt, L., Veron, M., Schryvers, D., & Jacques, P. (2009). Is there a relationship between the stacking fault character and the activated mode of plasticity of Fe-Mn-based austenitic steels? Scripta Materialia, 60(11), 941-944. https://doi.org/10.1016/j.scriptamat.2009.01.040 (Original work published 2009)
Reckinger, N., Tang, X., Bayot, V., Yarekha, D. A., Dubois, E., Godey, S., Wallart, X., Larrieu, G., Laszcz, A., Ratajczak, J., Jacques, P., & Raskin, J.-P. (2009). Schottky barrier lowering with the formation of crystalline Er silicide on n-Si upon thermal annealing. Applied Physics Letters, 94(19). https://doi.org/10.1063/1.3136849 (Original work published 2009)
Article de journal
Martin, E., GODET, S., Jiang, L., Elwazri, A., Jacques, P., & Jonas, J. J. (2008). An EBSD study of the misorientations related to dynamic recrystallization in Mg AM30 deformed at high temperatures. Ceramic Transactions, 200, 577-584. (Original work published 2008)
Lacroix, G., Pardoen, T., & Jacques, P. (2008). The fracture toughness of TRIP-assisted multiphase steels. Acta Materialia, 56(15), 3900-3913. https://doi.org/10.1016/j.actamat.2008.04.035 (Original work published 2008)
Delannay, L., Jacques, P., & Pardoen, T. (2008). Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. International Journal of Solids and Structures, 45(6), 1825-1843. https://doi.org/10.1016/j.ijsolstr.2007.10.026 (Original work published 2008)
Mertens, A., Jacques, P., Sietsma, J., & Delannay, F. (2008). Relative Influences of Aluminium and Silicon on the Kinetics of Bainite Formation from Intercritical Austenite. Steel Research International, 79(12), 954-959. https://doi.org/10.2374/SRI08SP068 (Original work published 2008)
Melchior, M., Jacques, P., & Delannay, L. (2008). Effect of Twinning and Grain Interaction On Texture Development in Rolled Twip Steel. Steel Research International, 153-159. (Original work published 2008)
Silva, I. C., Rebello, J. M. A., Bruno, A. C., Jacques, P., Nysten, B., & Dille, J. (2008). Structural and magnetic characterization of a carburized cast austenitic steel. Scripta Materialia, 59(9), 1010-1013. https://doi.org/10.1016/j.scriptamat.2008.07.015 (Original work published 2008)
Article de journal
Iker, M., Gaude-Fugarolas, D., Jacques, P., & Delannay, F. (2007). Improvement of the Mechanical Properties of High Manganese Steels by Combination of Precipitation Hardening and Mechanical Twinning. Advanced Materials Research, 15-17, 852-857. (Original work published 2007)
Delincé, M., Brechet, Y., Embury, J. D., Geers, M. G. D., Jacques, P., & Pardoen, T. (2007). Structure-property optimization of ultrafine-grained dual-phase steels using a micro structure-based strain hardening model. Acta Materialia, 55(7), 2337-2350. https://doi.org/10.1016/j.actamat.2006.11.029 (Original work published 2007)
Godet, S., Georges, C., & Jacques, P. (2007). On the phase transformations in hot rolled TRIP-assisted multiphase steels. Materials Science Forum, 539-543, 4333-4338. (Original work published 2007)
Lani, F., Furnemont, Q., Van Rompaey, T., Delannay, F., Jacques, P., & Pardoen, T. (2007). Multiscale mechanics of TRIP-assisted multiphase steels: II. Micromechanical modelling. Acta Materialia, 55(11), 3695-3705. https://doi.org/10.1016/j.actamat.2007.02.015 (Original work published 2007)
Andrade-Carozzo, V., & Jacques, P. (2007). Interactions between recrystallisation and phase transformations during annealing of cold rolled Nb-added TRIP-aided steels. Materials Science Forum, 539-543, 4649-4654. (Original work published 2007)
Clément, N., Lenain, A., & Jacques, P. (2007). Mechanical property optimization via microstructural control of new metastable beta titanium alloys. J O M, 59(1), 50-53. https://doi.org/10.1007/s11837-007-0010-y (Original work published 2007)
Jacques, P., Furnemont, Q., Lani, F., Pardoen, T., & Delannay, F. (2007). Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Materialia, 55(11), 3681-3693. https://doi.org/10.1016/j.actamat.2007.02.029 (Original work published 2007)
Delincé, M., Jacques, P., & Pardoen, T. (2007). Separation of the different strengthening contributions in fine-grained dual phase steels. Advanced Materials Research, 15-17, 846-851. (Original work published 2007)
Huang, J., Vogel, S. C., Poole, W. J., Militzer, M., & Jacques, P. (2007). The study of low-temperature austenite decomposition in a Fe-C-Mn-Si steel using the neutron Bragg edge transmission technique. Acta Materialia, 55(8), 2683-2693. https://doi.org/10.1016/j.actamat.2006.11.049 (Original work published 2007)
Godet, S., Youliang He, Jonas, J. J., & Jacques, P. (2007). An EBSD study of orientation relationships during phase transformations in ultra high performance steels. Materials Science Forum, 539-543, 4614-4619. (Original work published 2007)
Lenain, A., Clément, N., Veron, M., & Jacques, P. (2007). Characterisation of the phase transformations in a metastable beta titanium alloy. Materials Science Forum, 539-543, 3712-3717. (Original work published 2007)
Thèse
Jacques, P. (2007). On the control of the interactions between phase transformations and mechanical properties in finely-grained multiphase alloys, a way for sustainable development in materials science.
Article de journal
Sanchez-Araiza, M., Godet, S., Jacques, P., & Jonas, J. (2006). Texture evolution during the recrystallization of a warm-rolled low-carbon steel. Acta Materialia, 54(11), 3085-3093. https://doi.org/10.1016/j.actamat.2006.02.050 (Original work published 2006)
Delannay, L., Jacques, P., & Kalidindi, S. R. (2006). Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. International Journal of Plasticity, 22(10), 1879-1898. https://doi.org/10.1016/j.ijplas.2006.01.008 (Original work published 2006)
Van Rompaey, T., Lani, F., Jacques, P., Blanpain, B., Wollants, P., & Pardoen, T. (2006). Three-dimensional computational-cell modeling of the micromechanics of the martensitic transformation in transformation-induced-plasticity-assisted multiphase steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 37A(1), 99-107. https://doi.org/10.1007/s11661-006-0156-1 (Original work published 2006)
Godet, S., Harlet, P., & Jacques, P. (2006). Grain refinement of TRIP-Assisted multiphase steels through strain-induced phase transformation. Steel Research International, 77(4), 271-275. (Original work published 2006)
He, Y., Godet, S., Jacques, P., & Jonas, J. (2006). Crystallographic relations between face- and body-centred cubic crystals formed under near-equilibrium conditions: Observations from the Gibeon meteorite. Acta Materialia, 54(5), 1323-1334. https://doi.org/10.1016/j.actamat.2005.11.008 (Original work published 2006)
Chehab, B., Brechet, Y., Glez, J.-C., Jacques, P., Mithieux, J.-D., Veron, M., & Pardoen, T. (2006). Characterization of the high temperature tearing resistance using the essential work of fracture - Application to dual phase ferritic stainless steels. Scripta Materialia, 55(11), 999-1002. https://doi.org/10.1016/j.scriptamat.2006.08.011 (Original work published 2006)
Gaude-Fugarolas, D., & Jacques, P. (2006). A new physical model for the kinetics of the bainite transformation. ISIJ International, 46(5), 712-717. https://doi.org/10.2355/isijinternational.46.712 (Original work published 2006)
Jacques, P., Furnemont, Q., Godet, S., Pardoen, T., Conlon, K., & Delannay, F. (2006). Micromechanical characterisation of TRIP-assisted multiphase steels by in situ neutron diffraction. Philosophical Magazine (London, 2003), 86(16), 2371-2392. https://doi.org/10.1080/14786430500529359 (Original work published 2006)
Delincé, M., Jacques, P., & Pardoen, T. (2006). Separation of size-dependent strengthening contributions in fine-grained Dual Phase steels by nanoindentation. Acta Materialia, 54(12), 3395-3404. https://doi.org/10.1016/j.actamat.2006.03.031 (Original work published 2006)
HE, Y., Godet, S., Jacques, P., & Jonas, J. J. (2006). Crystallograhic relations between face- and body-centred cubic crystals formed under near-equilibrium conditions: Observations from the Gibeon meteorite. Acta Materialia, 54(5), 1323-1334. (Original work published 2006)
He, Y., Godet, S., Jacques, P., & Jonas, J. J. (2006). Crystallographic features of the gamma-to-alpha transformation in a Nb-added transformation-induced plasticity steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 37A(9), 2641-2653. https://doi.org/10.1007/BF02586099 (Original work published 2006)
Article de journal
He, Y., Godet, S., Jacques, P., & Jonas, J. (2005). Crystallographic relationships between FCC and BCC crystals: A study using EBSD techniques. Solid State Phenomena, 105, 121-126. (Original work published 2005)
Godet, S., He, Y., Jonas, J., & Jacques, P. (2005). Multiscale characterisation of the transformation texture in a high performance steel. Materials Science Forum, 495-497, 381-386. (Original work published 2005)
Georges, C., Godet, S., & Jacques, P. (2005). Development of high performance Nb-added hot rolled bainitic steels presenting a TRIP effect. Materials Science Forum, 500-501, 437-444. (Original work published 2005)
Andrade-Carozzo, V., & Jacques, P. (2005). TRIP-Assisted multiphase steels with niobium additions. Microstructures and properties. Materials Science Forum, 500-501, 445-451. (Original work published 2005)
Lenain, A., Clément, N., Veron, M., & Jacques, P. (2005). Characterization of the alpha phase nucleation in a two-phase metastable beta titanium alloy. Journal of Materials Engineering and Performance, 14(6), 722-727. https://doi.org/10.1361/105994905X75510 (Original work published 2005)
Delannay, L., Melchior, M., Jacques, P., & Van Houtte, P. (2005). Simulation of the lattice strains developed during a tensile test on a multiphase steel. Materials Science Forum, 495-497, 1627-1632. (Original work published 2005)
Petein, A., Ryelandt, L., Godet, S., & Jacques, P. (2005). Microscale characterisation of deformed microstructures of TRIP-assisted and multiphase. Materials Science Forum, 495-497, 459-464. (Original work published 2005)
He, Y., Godet, S., Jacques, P., & Jonas, J. (2005). Variant selection during the transformation of deformed austenite in a niobium bearing TRIP steel. Materials Science Forum, 495-497, 345-350. (Original work published 2005)
Sanchez-Ariaza, M., Godet, S., Jacques, P., & Jonas, J. (2005). Effect of hot band grain size on the anisotropy of warm rolled low carbon steels. Materials Science Forum, 500-501, 787-794. (Original work published 2005)
Article de journal
Petein, A., & Jacques, P. (2004). On the relationship between mechanical properties and mechanisms of plastic deformation in metastable austenitic steels. Steel Research, 75(11), 724-729. (Original work published 2004)
Godet, S., Glez, J., He, Y., Jonas, J., & Jacques, P. (2004). Grain-scale characterization of transformation textures. Journal of Applied Crystallography, 37, 417-425. https://doi.org/10.1107/S0021889804007320 (Original work published 2004)
Furnemont, Q., Lacroix, G., Godet, S., Conlon, K., & Jacques, P. (2004). Critical assessment of the micromechanical behaviour of dual phase and trip-assisted multiphase steels. Canadian Metallurgical Quarterly, 43(1), 35-42. https://doi.org/10.1179/cmq.2004.43.1.35 (Original work published 2004)
Jacques, P. (2004). Transformation-induced plasticity for high strength formable steels. Current Opinion in Solid State & Materials Science, 8(3-4), 259-265. https://doi.org/10.1016/j.cossms.2004.09.006 (Original work published 2004)
Article de journal
Godet, S., Jacques, P., Harlet, P., & Delannay, F. (2003). Simulation of the hot rolling of TRIP-assisted multiphase steels. Materials Science Forum, 426-4, 1273-1278. (Original work published 2003)
Van Rompaey, T., Furnémont, Q., Jacques, P., Pardoen, T., BLANPAIN, B., & Wollants, P. (2003). Micromechanical modelling of TRIP steels. Steel Research International, 74(6), 365-369. (Original work published 2003)
Godet, S., Harlet, P., Delannay, F., & Jacques, P. (2003). Critical assessment of the bainite transformation of finely grained and deformed austenite. Materials Science Forum, 426-4, 1433-1438. (Original work published 2003)
Godet, S., Kim, B., Jacques, P., Szpunar, J., Jonas, J., & Delannay, F. (2003). Microtextural study of variant selection by EBSD in a bainitic steel containing retained austenite. Journal de Physique IV, 112, 309-312. https://doi.org/10.1051/jp4:2003890 (Original work published 2003)
Jacques, P. (2003). Experimental investigation of the influence of the austenite grain size on the mechanism and kinetics of the bainite transformation in steels. Journal de Physique IV, 112, 297-300. https://doi.org/10.1051/jp4:2003887 (Original work published 2003)
Mertens, A., Jacques, P., Zhao, L., Kruijver, S., Sietsma, J., & Delannay, F. (2003). On the influence of aluminium and silicon contents on the kinetics of bainite transformation of intercritical austenite. Journal de Physique IV, 112, 305-308. https://doi.org/10.1051/jp4:2003889 (Original work published 2003)
Furnemont, Q., Delannay, F., & Jacques, P. (2003). Experimental investigation of the influence of the stress state on the mechanical stability of austenite in multiphase steels. Journal de Physique IV, 112, 421-424. https://doi.org/10.1051/jp4:2003915 (Original work published 2003)
Lani, F., Fumemont, Q., Jacques, P., Delannay, F., & Pardoen, T. (2003). Micromechanical modeling of plastic anisotropy and strain induced phase transformation in dual-elastoplastic phase materials. Journal de Physique IV, 105, 139-147. https://doi.org/10.1051/jp4:20030181 (Original work published 2003)
Article de journal
Zhao, L., Kop, T., Rolin, V., Sietsma, J., Mertens, A., Jacques, P., & Van der Zwaag, S. (2002). Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel. Journal of Materials Science, 37(8), 1585-1591. https://doi.org/10.1023/A:1014941424093 (Original work published 2002)
Godet, S., Harlet, P., Delannay, F., & Jacques, P. (2002). Effect of hot-rolling conditions on the tensile properties of multiphase steels exhibiting a TRIP effect. Steel Research, 73(6-7), 280-286. (Original work published 2002)
Filippone, R., Root, J., Jacques, P., & Yue, S. (2002). The influence of martensite on line broadening in neutron diffraction spectra of a DP steel. ISIJ International, 42(3), 304-309. https://doi.org/10.2355/isijinternational.42.304 (Original work published 2002)
Furnemont, Q., Kempf, M., Jacques, P., Goken, M., & Delannay, F. (2002). On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 328(1-2), 26-32. https://doi.org/10.1016/S0921-5093(01)01689-6 (Original work published 2002)
Article de journal
Jacques, P., Furnemont, Q., Pardoen, T., & Delannay, F. (2001). On the role of martensitic transformation on damage and cracking resistance in trip-assisted multiphase steels. Acta Materialia, 49(1), 139-152. https://doi.org/10.1016/S1359-6454(00)00215-9 (Original work published 2001)
Jacques, P., Girault, E., Harlet, P., & Delannay, F. (2001). The developments of cold-rolled TRIP-assisted multiphase steels. Low silicon TRIP-assisted multiphase steels. ISIJ International, 41(9), 1061-1067. https://doi.org/10.2355/isijinternational.41.1061 (Original work published 2001)
Girault, E., Mertens, A., Jacques, P., Houbaert, Y., Verlinden, B., & Van Humbeeck, J. (2001). Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase trip-assisted steels. Scripta Materialia, 44(6), 885-892. https://doi.org/10.1016/S1359-6462(00)00697-7 (Original work published 2001)
Jacques, P., Girault, E., Mertens, A., Verlinden, B., Van Humbeeck, J., & Delannay, F. (2001). The developments of cold-rolled TRIP-assisted multiphase steels. Al-alloyed TRIP-assisted multiphase steels. ISIJ International, 41(9), 1068-1074. https://doi.org/10.2355/isijinternational.41.1068 (Original work published 2001)
Fumemont, Q., Jacques, P., & Pardoen, T. (2001). The macro- and micromechanics of TRIP-assisted multiphase steels, experiments and modeling. Journal de Physique IV, 11(PR5), 325-332. (Original work published 2001)
Jacques, P., Ladrière, J., & Delannay, F. (2001). On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 32(11), 2759-2768. https://doi.org/10.1007/s11661-001-1027-4 (Original work published 2001)
Jacques, P., Furnemont, Q., Mertens, A., & Delannay, F. (2001). On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity. Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties, 81(7), 1789-1812. https://doi.org/10.1080/01418610108216637 (Original work published 2001)
Mertens, A., Jacques, P., Lazarova, R., Zhao, L., Sietsma, J., & Delannay, F. (2001). On the influence of aluminium content on the stability of retained austenite in multiphase TRIP-assisted steels. Journal de Physique IV, 11(PR8), 223-228. https://doi.org/10.1051/jp4:2001838 (Original work published 2001)
Girault, E., Godet, S., Jacques, P., Bocher, P., Verlinden, B., & Van Humbeeck, J. (2001). Effect of hot-rolling in the austenitic region on the formation of isothermal bainite in a 0.4C-1.5Si-1.4Mn steel. Journal de Physique IV, 11(PR8), 217-222. https://doi.org/10.1051/jp4:2001837 (Original work published 2001)
Article de journal
Godet, S., Jacques, P., & Delannay, F. (2000). Effect of work-hardening of retained austenite on the martensitic transformation in a TRIP-aided steel. Advances in Mechanical Behaviour Plasticity and Damage, 835-840. (Original work published 2000)
Article de journal
Girault, E., Jacques, P., Ratchev, P., Van Humbeeck, J., Verlinden, B., & Aernoudt, E. (1999). Study of the temperature dependence of the bainitic transformation rate in a multiphase TRIP-assisted steel. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 273, 471-474. (Original work published 1999)
Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, T., van der Zwaag, S., & Delannay, F. (1999). Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and austenite retention. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 273, 475-479. (Original work published 1999)
Thèse
Jacques, P. (1999). On the physics and mechanics of phase transformations in TRIP-assisted multiphase steels.
Article de journal
Jacques, P., Cornet, X., Harlet, P., Ladrière, J., & Delannay, F. (1998). Enhancement of the mechanical properties of a low-carbon, low-silicon steel by formation of a multiphased microstructure containing retained austenite. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 29(9), 2383-2393. https://doi.org/10.1007/s11661-998-0114-1 (Original work published 1998)
Girault, E., Jacques, P., Harlet, P., Mols, K., Van Humbeeck, J., Aernoudt, E., & Delannay, F. (1998). Metallographic methods for revealing the multiphase microstructure of TRIP-assisted steels. Materials Characterization, 40(2), 111-118. https://doi.org/10.1016/S1044-5803(97)00154-X (Original work published 1998)
Article de journal
Jacques, P., Girault, E., Van Humbeeck, J., Aernoudt, E., & Delannay, F. (1997). Experimental characterisation of the bainitic transformation kinetics of residual austenite in Mn-Si TRIP-assisted multiphase steels. Journal de Physique IV, 7(C5), 459-463. (Original work published 1997)
Article de journal
Jacques, P., Verbist, K., Lapin, J., Ryelandt, L., VanTendeloo, G., & Delannay, F. (1996). Critical assessment of the process of growth of a YBa2Cu3O7-delta layer on Y2BaCuO5. Superconductor Science & Technology, 9(3), 176-183. https://doi.org/10.1088/0953-2048/9/3/008 (Original work published 1996)
