IMAP
Place Sainte Barbe 2/L5.02.02
1348 Louvain-la-Neuve
- Accueil
- Répertoire
- Aude Simar
Aude Simar
Professeure
2012 Habilitation à diriger des recherches Université Lille1
Editorial Comitee
Since 2011 : Associate editor for the international journal by Elsevier "Materials Characterization", impact factor 2.4 - in charge of the edition of papers on "Light metals and alloys" (~100 papers/year)
Awards
2003: 1st price at the end of study work competition for the 2002 promotion of engineers out of UCL (AILouvain competition)
2013: Soete price of the Belgian Welding Institute (IBS/BIL)
- Diplômes
Année Label Institution 1999 Candidate ingénieur civil Université catholique de Louvain 2002 Ingénieur civil mécanicien Université catholique de Louvain 2004 Diplômée d'études approfondies en sciences appliquées Université catholique de Louvain 2006 Docteur en sciences appliquées Université catholique de Louvain
Topics:
- dissimilar welding: friction stir welding and friction melt bonding
- friction stir processing
- additive manufacturing
- metal matrix composites
PhD thesis supervision
2008-2012 : Co-supervisor (with Prof. Bruno de Meester) of the PhD thesis of Caroline Jonckheere. Title : Friction stir welding of dissimilar 2014-6061 aluminum alloys.
2010- 2015: Co-supervisor (with Prof. Pascal Jacques) of the PhD thesis of Camille van der Rest. Title : Physico-chemical characterization of Fe-V-Al alloys and their production as micro-architectured structures for thermoelectric applications.
2013-2016: Co-supervisor (with Marc Fivel, Emilie Ferrié from INP Grenoble and Erica Lilleodden from Helmholtz-Zentrum, Geesthacht) of the PhD thesis of Camila Mallmann, PhD thesis that was mainly performed at INP Grenoble. Title: Mechanisms of plastic deformation of magnesium matrix nanocomposites.
2013- : Co-supervisor (with Prof. Pascal Jacques) of the PhD thesis of Norberto Jimenez-Mena. Title : Optimisation of an innovative process to weld Al-to-steel: from microstructure evolution to mechanical .
2013- : Co-supervisor (with Prof. Thomas Pardoen) of the PhD thesis of Florent Hannard. Title: Micromechanical modeling and in-situ 3D microtomography testing of microstructure heterogeneities and shear effects on damage in aluminum alloys.
2014- : Co-supervisor (with Prof. Pascal Jacques) of the PhD thesis of Pauline Delroisse. Title: Study of the influence of the processing parameters of aluminum lattice structures produced by additive manufacturing on their impact resistance.
2016-: PhD thesis of Guillermo Santos. Title: Friction stir processing for the improvement of the mechanical performances of additive manufacturing parts in aluminum alloys.
2017-: PhD thesis of Mariia Arseenko. Title: Development and characterization of a self-healing aluminum alloy.
Post-doc supervision:
2015-2016: Didier Bardel. Topic: Behavior of 6xxx series Al alloys subjected to strain path changes.
2017- : Lv Zhao: Topic: Crack deviation in Al alloys by Friction stir processing.
2017- : Thaneshan Sapanathan. Topic: Failure mitigation in innovative dissimilar metal joints.
2017- : Murshid Imam. Topic: Friction stir processing of Al alloys.
Krishnamurthy, Sanjay Channappa ; Arseenko, Mariia ; Kashiwar, Ankush ; Dufour, Philippe ; Marchal, Yves ; Delahaye, Jocelyn ; Idrissi, Hosni ; Pardoen, Thomas ; Mertens, Anne ; Simar, Aude. Controlled precipitation in a new Al-Mg-Sc alloy for enhanced corrosion behavior while maintaining the mechanical performance. In: Materials Characterization, Vol. 200, p. 112886 (2023). doi:10.1016/j.matchar.2023.112886.
Song, Lubin ; Yuan, Shulin ; Zhao, Lv ; Zhu, Yaxin ; Liang, Shuang ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Deciphering phase stress partition and its correlation to mechanical anisotropy of laser powder bed fusion AlSi10Mg. In: Additive Manufacturing, Vol. 71, p. 103594 (2023). doi:10.1016/j.addma.2023.103594.
Gheysen, Julie ; Tingaud, David ; Villanova, Julie ; Hocini, Azziz ; Simar, Aude. Exceptional fatigue life and ductility of new liquid healing hot isostatic pressing especially tailored for additive manufactured aluminum alloys. In: Scripta Materialia, Vol. 233, p. 115512 (2023). doi:10.1016/j.scriptamat.2023.115512.
Han, Sutao ; Lezaack, Matthieu Baudouin ; Pyka, Grzegorz ; Gomes Affonseca Netto, Nelson ; Simar, Aude ; Wahab, Magd Abdel ; Hannard, Florent. On the Competition between Intergranular and Transgranular Failure within 7xxx Al Alloys with Tailored Microstructures. In: Materials, Vol. 16, no.10, p. 3770 (2023). doi:10.3390/ma16103770.
Dimov, Nicolas ; Weisz-Patrault, Daniel ; Tanguy, Alexandre ; Sapanathan, Thaneshan ; Benoist, Julien ; Charkaluk, Eric ; Simar, Aude. Strain and damage analysis using high resolution digital image correlation in the stir zone of an AA6061-AA7075 dissimilar friction stir weld. In: Materials Today Communications, Vol. 34, p. 105359 (2023). doi:10.1016/j.mtcomm.2023.105359.
Gheysen, Julie ; Kashiwar, Ankush ; Idrissi, Hosni ; Villanova, Julie ; Simar, Aude. Suppressing hydrogen blistering in a magnesium-rich healable laser powder bed fusion aluminum alloy analyzed by in-situ high resolution techniques. In: Materials & Design, Vol. 231, p. 112024 (2023). doi:10.1016/j.matdes.2023.112024.
Arseenko, Mariia ; Hannard, Florent ; Ding, Lipeng ; Zhao, Lv ; Maire, Eric ; Villanova, Julie ; Idrissi, Hosni ; Simar, Aude. A new healing strategy for metals: Programmed damage and repair. In: Acta Materialia, Vol. 238, p. 118241 (2022). doi:10.1016/j.actamat.2022.118241.
Avettand-Fènoël, M.-N. ; Gomes Affonseca Netto, Nelson ; Simar, Aude ; Marinova, M. ; Taillard, R.. Design of a metallic glass dispersion in pure copper by friction stir processing. In: Journal of Alloys and Compounds, Vol. 907, p. 164522 (2022). doi:10.1016/j.jallcom.2022.164522.
Lezaack, Matthieu Baudouin ; Simar, Aude ; Marchal, Yannick ; Steinmetz, Martin ; Faes, Koen ; Saraiva Esteves Pacheco De Almeida, João. Dissimilar friction welding of NiTi shape memory alloy and steel reinforcing bars for seismic performance. In: Science and Technology of Welding and Joining, Vol. 27, no. 6, p. 418-428 (2022). doi:10.1080/13621718.2022.2061692.
Santos Macías, Juan Guillermo ; Zhao, Lv ; Tingaud, David ; Bacroix, Brigitte ; Pyka, Grzegorz ; van der Rest, Camille ; Ryelandt, Laurence ; Simar, Aude. Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties. In: Journal of Materials Science, Vol. Special issue on Additive Manufacturing (2022). doi:10.1007/s10853-022-07027-9.
Voet, Vincent ; Van Loock, Frederik ; De Fruytier, Christophe ; Simar, Aude ; Pardoen, Thomas. Machine learning aided modelling of thermomechanical fatigue of solder joints in electronic component assemblies. In: International Journal of Fatigue, Vol. 167, p. 107298 (2022). doi:10.1016/j.ijfatigue.2022.107298.
Song, Lubin ; Zhao, Lv ; Ding, Lipeng ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg. In: Materials Science and Engineering: A, Vol. 832, p. 142484 (2022). doi:10.1016/j.msea.2021.142484.
Ding, Lipeng ; Sapanathan, Thaneshan ; Schryvers, Dominique ; Simar, Aude ; Idrissi, Hosni. On the formation of antiphase boundaries in Fe4Al13 intermetallics during a high temperature treatment. In: Scripta Materialia, Vol. 215, p. 114726 (2022). doi:10.1016/j.scriptamat.2022.114726.
Zhao, Lv ; Song, Lubin ; Santos Macias, Juan Guillermo ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg. In: Additive Manufacturing, Vol. 56, p. 102914 (2022). doi:10.1016/j.addma.2022.102914.
Heidarzadeh, Akbar ; Mohammadzadeh, Roghayeh ; Jafarian, Hamid Reza ; Pruncu, Catalin ; Simar, Aude. Role of geometrically necessary dislocations on mechanical properties of friction stir welded single-phase copper with medium stacking fault energy. In: Journal of Materials Research and Technology, Vol. 16, p. 194-200 (2022). doi:10.1016/j.jmrt.2021.11.162.
Lezaack, Matthieu Baudouin ; Hannard, Florent ; Simar, Aude. Understanding the ductility versus toughness and bendability decoupling of large elongated and fine grained Al 7475 - T6 alloy. In: Materials Science and Engineering: A, Vol. 839, p. 142816 (2022). doi:10.1016/j.msea.2022.142816.
Lezaack, Matthieu Baudouin ; Simar, Aude. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments. In: Materials Science and Engineering: A, Vol. 807, p. 140901 (2021). doi:10.1016/j.msea.2021.140901.
Jiménez Mena, Norberto ; Sapanathan, Thaneshan ; Jacques, Pascal ; Simar, Aude. Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds. In: Engineering Fracture Mechanics, Vol. 249, no. 107756 (2021). doi:10.1016/j.engfracmech.2021.107756.
Poncelet, Olivier ; Marteleur, Matthieu ; van der Rest, Camille ; Rigo, O. ; Adrien, J. ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion. In: Additive Manufacturing, Vol. 38, p. 101801 (2021). doi:10.1016/j.addma.2020.101801.
Gheysen, Julie ; Marteleur, Matthieu ; van der Rest, Camille ; Simar, Aude. Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy. In: Materials & Design, Vol. 199, p. 109433 (2021). doi:10.1016/j.matdes.2020.109433.
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Buffière, Jean-Yves ; Van Hooreweder, Brecht ; Simar, Aude. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions. In: Materials & Design, Vol. 210, p. 110084 (2021). doi:10.1016/j.matdes.2021.110084.
Heidarzadeh, A. ; Mironov, S. ; Kaibyshev, R. ; Çam, G. ; Simar, Aude ; Gerlich, A. ; Khodabakhshi, F. ; Mostafaei, A. ; Field, D.P. ; Robson, J.D. ; Deschamps, A. ; Withers, P.J.. Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution. In: Progress in Materials Science, Vol. 117, p. 100752 (2021). doi:10.1016/j.pmatsci.2020.100752.
Sapanathan, Thaneshan ; Sabirov, Ilchat ; Xia, Peikang ; Monclus, Miguel ; Molina-Aldareguia, Jon M ; Jacques, Pascal ; Simar, Aude. High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. In: Scripta Materialia, Vol. 200, no. 113910 (2021). doi:10.1016/j.scriptamat.2021.113910.
Avettand-Fènoël, Marie-Noëlle ; Sapanathan, Thaneshan ; Pirling, Thilo ; Racineux, Guillaume ; Simar, Aude ; Drezet, Jean-Marie. Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction. In: Journal of Manufacturing Processes, Vol. 68, p. 1758-1766 (2021). doi:10.1016/j.jmapro.2021.06.071.
Lefebvre, Williams ; Rose, Grégory ; Delroisse, Pauline ; Baustert, Eric ; Cuvilly, Fabien ; Simar, Aude. Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy. In: Materials & Design, Vol. 197, p. 109264 (2021). doi:10.1016/j.matdes.2020.109264.
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Hou, Yuliang ; Simar, Aude ; Rachik, Mohamed. On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations. In: Journal of Materials Processing Technology, Vol. 296, no. 117185 (2021). doi:10.1016/j.jmatprotec.2021.117185.
Huang, Chunjie ; Arseenko, Mariia ; Zhao, Lv ; Xie, Yingchun ; Elsenberg, Andreas ; Li, Wenya ; Gärtner, Frank ; Simar, Aude ; Klassen, Thomas. Property prediction and crack growth behavior in cold sprayed Cu deposits. In: Materials & Design, Vol. 206, p. 109826 (2021). doi:10.1016/j.matdes.2021.109826.
Lezaack, Matthieu ; Hannard, Florent ; Zhao, Lv ; Orekhov, Andrey ; Adrien, Jérôme ; Miettinen, Arttu ; Idrissi, Hosni ; Simar, Aude. Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments. In: Materialia, Vol. 20, p. 101248 (2021). doi:10.1016/j.mtla.2021.101248.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Douillard, Thierry ; Li, Zhenhuan ; Simar, Aude. Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions. In: Materials Science and Engineering: A, Vol. 807, p. 140845 (2021). doi:10.1016/j.msea.2021.140845.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Dolimont, Adrien ; Simar, Aude ; Rivière-Lorphèvre, Edouard. Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. In: Additive Manufacturing, Vol. 36, p. 101499 (2020). doi:10.1016/j.addma.2020.101499.
Simar, Aude ; Hannard, Florent ; Lezaack, Matthieu Baudouin ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Pyka, Grzegorz. Extended durability for high strength aluminium alloys. In: The Innovation Patform, Vol. on line (2020).
Santos Macias, Juan Guillermo ; Douillard, Thierry ; Zhao, Lv ; Maire, Eric ; Pyka, Grzegorz ; Simar, Aude. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg. In: Acta Materialia, Vol. 201, p. 231-243 (2020). doi:10.1016/j.actamat.2020.10.001.
Simar, Aude. Lightening the load of aluminium alloys. In: EU Researcher, Vol. Summer 2020, p. 59 (2020).
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Soete, Jeroen ; Pyka, Grzegorz ; Simar, Aude. Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach. In: Journal of Materials Processing Technology, Vol. 283, p. 116722 (2020). doi:10.1016/j.jmatprotec.2020.116722.
Sapanathan, Thaneshan ; Jimenez-Mena, Norberto ; Sabirov, Ilchat ; Monclús, Miguel A. ; Molina-Aldareguia, Jon ; Xia, Peikang ; Zhao, Lv ; Simar, Aude. A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. In: Journal of Materials Science & Technology, Vol. 35, no. 9, p. 2048-2057 (2019). doi:10.1016/j.jmst.2019.05.004.
Zhao, Lv ; Santos Macias, Juan Guillermo ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. In: Materials Science and Engineering: A, Vol. 764, p. 138210 (2019). doi:10.1016/j.msea.2019.138210.
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Van Hooreweder, Brecht ; Adrien, Jérôme ; Maire, Eric ; Buffière, Jean-Yves ; Ludwig, Wolfgang ; Jacques, Pascal ; Simar, Aude. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing. In: Scripta Materialia, Vol. 170, p. 124-128 (2019). doi:10.1016/j.scriptamat.2019.05.044.
Huang, Chunjie ; Yan, Xingchen ; Zhao, Lv ; Liu, Min ; Ma, Wenyou ; Wang, Weibing ; Soete, Jeroen ; Simar, Aude. Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing. In: Materials Science and Engineering: A, Vol. 755, p. 85-96 (2019). doi:10.1016/j.msea.2019.03.133.
Jimenez-Mena, Norberto ; Jacques, Pascal ; Ding, Lipeng ; Gauquelin, Nicolas ; Schryvers, Dominique ; Idrissi, Hosni ; Delannay, Francis ; Simar, Aude. Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers. In: Materials Science and Engineering: A, Vol. 740-741, p. 274-284 (2019). doi:10.1016/j.msea.2018.10.101.
Zhao, Lv ; Ding, Lipeng ; Soete, Jeroen ; Idrissi, Hosni ; Kerckhofs, Greet ; Simar, Aude. Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness. In: Composites Part A: Applied Science and Manufacturing, Vol. 126, p. 105617 (2019). doi:10.1016/j.compositesa.2019.105617.
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Zhang, Zhan ; Chen, X.-Grant ; Marceau, Daniel ; Simar, Aude ; Rachik, Mohamed. Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics. In: Materials Letters, Vol. 249, p. 177-179 (2019). doi:10.1016/j.matlet.2019.04.094.
Jimenez-Mena, Norberto ; Simar, Aude ; Jacques, Pascal. On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers. In: Materials & Design, Vol. 180, p. 107958 (2019). doi:10.1016/j.matdes.2019.107958.
Jimenez mena, Norberto ; Sapanathan, Thaneshan ; Drezet, Jean-Marie ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction. In: Journal of Materials Processing Technology, Vol. 266, p. 651-661 (2019). doi:10.1016/j.jmatprotec.2018.11.030.
Mallmann, C. ; Hannard, Florent ; Ferrié, E. ; Simar, Aude ; Daudin, R. ; Lhuissier, P. ; Pacureanu, A. ; Fivel, M.. Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites. In: Materials Science and Engineering: A, Vol. 764, p. 138170 (2019). doi:10.1016/j.msea.2019.138170.
Amani, Yasin ; Dancette, Sylvain ; Delroisse, Pauline ; Simar, Aude ; Maire, Eric. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches. In: Acta Materialia, Vol. 159, p. 395-407 (2018). doi:10.1016/j.actamat.2018.08.030.
Simar, Aude ; Godet, Stéphane ; Watkins, Thomas R.. Highlights of the special issue on metal additive manufacturing. In: Materials Characterization, Vol. 143, p. 1-4 (2018). doi:10.1016/j.matchar.2018.06.013.
Simar, Aude ; Mertens, Anne ; Ryelandt, Sophie ; Delannay, Francis ; Brassart, Laurence. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. In: Materials Science and Engineering: A, Vol. 723, p. 324-333 (2018). doi:10.1016/j.msea.2018.03.043.
Jimenez Mena, Norberto ; Jacques, Pascal ; Drezet, Jean-Marie ; Simar, Aude. On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 49, no. 7, p. 2692-2704 (2018). doi:10.1007/s11661-018-4618-z.
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. In: Acta Materialia, Vol. 148, p. 456-466 (2018). doi:10.1016/j.actamat.2018.02.003.
Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas ; Simar, Aude. Ductilization of aluminium alloy 6056 by friction stir processing. In: Acta Materialia, Vol. 130, p. 121-136 (2017). doi:10.1016/j.actamat.2017.01.047.
Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier ; Simar, Aude. Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. In: Scripta Materialia, Vol. 141, p. 32-35 (2017). doi:10.1016/j.scriptamat.2017.07.020.
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Influence of Y2O3 nanoparticles on the twinning of single crystalline magnesium. In: Scripta Materialia, Vol. 138, p. 79-82 (2017). doi:10.1016/j.scriptamat.2017.05.016.
Simar, Aude ; Avettand-Fènoël, Marie-Noëlle. State of the art about dissimilar metal friction stir welding. In: Science and Technology of Welding and Joining (Print), Vol. 22, no. 5, p. 389-403 (2017). doi:10.1080/13621718.2016.1251712.
Avettand-Fènoël, Marie-Noëlle ; Simar, Aude. A review about Friction Stir Welding of metal matrix composites. In: Materials Characterization, Vol. 120, p. 1-17 (2016). doi:10.1016/j.matchar.2016.07.010.
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Le Bourlot, C. ; Mokso, Rajmund ; Simar, Aude. Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys. In: Acta Materialia, Vol. 103, p. 558-572 (2016). doi:10.1016/j.actamat.2015.10.008.
Mas, Fanny ; Martin, Guilhem ; Lhuissier, Pierre ; Bréchet, Yves ; Tassin, Catherine ; Roch, François ; Simar, Aude. Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 667, p. 156-170 (2016). doi:10.1016/j.msea.2016.04.082.
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Bordo, Kirill ; Simar, Aude ; Ambat, Rajan. Effect of High Frequency Pulsing on the Interfacial Structure of Anodized Aluminium-TiO2. In: Journal of the Electrochemical Society, Vol. 162, no. 7, p. C303-C310 (March 2015). doi:10.1149/2.0311507jes.
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Simar, Aude ; Shabadi, Rajashekhara ; Ambat, Rajan. Friction Stir Processed Al-TiO2 Surface Composites: Anodizing Behaviour and Optical Appearance. In: Applied Surface Science, Vol. 324, p. 554-562 (2015). doi:10.1016/j.apsusc.2014.10.151.
Gudla, Visweswara Chakravarthy ; Bordo, Kirill ; Jensen, Flemming ; Canulescu, Stela ; Yuksel, Serkan ; Simar, Aude ; Ambat, Rajan. High frequency anodising of aluminium–TiO2 surface composites: Anodising behaviour and optical appearance. In: Surface and Coatings Technology, Vol. 277, p. 67-73 (2015). doi:10.1016/j.surfcoat.2015.07.035.
Mertens, Anne ; Simar, Aude ; Adrien, Jérôme ; Maire, Eric ; Montrieux, Henri-Michel ; Delannay, Francis ; Lecomte-Beckers, Jacqueline. Influence of Fibre Distribution and Grain Size on the Mechanical Behaviour of Friction Stir Processed Mg-C Composites. In: Materials Characterization, Vol. 107, p. 125-133 (2015). doi:10.1016/j.matchar.2015.07.010.
Crucifix, S. ; van der Rest, Camille ; Jimenez Mena, Norberto ; Jacques, Pascal ; Simar, Aude. Modelling thermal cycles and intermetallic growth during friction melt bonding of ULC steel to aluminium alloy 2024-T3. In: Science and Technology of Welding and Joining, Vol. 20, no. 4, p. 319-324 (2015). doi:10.1179/1362171815Y.0000000020.
Shabadi, Rajashekhara ; Avettand-Fènoël, Marie Noëlle ; Simar, Aude ; Taillard, Roland ; Jain, P.K. ; Johnson, Roy. Thermal conductivity in yttria dispersed copper. In: Materials & Design, Vol. 65, p. 869-877 (2015). doi:10.1016/j.matdes.2014.09.083.
Avettand-Fènoël, M.-N. ; Simar, Aude ; Shabadi, R. ; Taillard, R. ; de Meester de Betzenbroeck, Bruno. Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing. In: Materials & Design, Vol. 60, p. 343-357. doi:10.1016/j.matdes.2014.04.012.
Lecarme, Liza ; Maire, Eric ; K.C., Amit Kumar ; De Vleeschouwer, Christophe ; Jacques, Laurent ; Simar, Aude ; Pardoen, Thomas. Heterogenous void growth revealed by in situ 3-D X-ray mocrotomography using automatic cavity tracking. In: Acta Materialia, Vol. 63, p. 130-139. doi:10.1016/j.actamat.2013.10.014.
van der Rest, Camille ; Jacques, Pascal ; Simar, Aude. On the joining of steel and aluminium by means of a new friction melt bonding process. In: Scripta Materialia, Vol. 77, p. 25-28 (2014). doi:10.1016/j.scriptamat.2014.01.008.
Sonne, M.R. ; Tutum, C.C. ; Hattel, Jasper ; Simar, Aude ; de Meester de Betzenbroeck, Bruno. The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3. In: Journal of Materials Processing Technology, Vol. 213, no.3, p. 477-486 (March 2013). doi:10.1016/j.jmatprotec.2012.11.001 (Accepté/Sous presse).
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Simar, Aude. Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061-T6 and 2014-T6 aluminum alloys. In: Journal of Materials Processing Technology, Vol. 213, no. 6, p. 826-837 (2013). doi:10.1016/j.jmatprotec.2013.01.001.
Mertens, Anne ; Simar, Aude ; Delannay, Francis. C Fibres - Mg Matrix Composites Produced by Squeeze Casting and Friction Stir Processing: Microstructure & Mechanical Behaviour. In: Materials Science Forum, Vol. 706-709, p. 1221-1226 (2012). doi:10.4028/www.scientific.net/MSF.706-709.1221.
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Simar, Aude. Dissimilar friction stir welding of 2014 to 6061 Aluminum Alloys. In: Advanced Materials Research, Vol. 409, p. 269-274 (2012). doi:10.4028/www.scientific.net/AMR.409.269.
Simar, Aude ; Bréchet, Yves ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Gallais, Christophe ; Pardoen, Thomas. Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties. In: Progress in Materials Science, Vol. 57, no. 1, p. 95-183 (2012). doi:10.1016/j.pmatsci.2011.05.003.
Jacquin, Dimitri ; de Meester de Betzenbroeck, Bruno ; Simar, Aude ; Deloison, Dominique ; Montheillet, F. ; Desrayaud, C.. A simple Eulerian thermomechanical modeling of friction stir welding. In: Journal of Materials Processing Technology, Vol. 211, no. 1, p. 57-65 (2011). doi:10.1016/j.jmatprotec.2010.08.016.
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Cassiers, Cédric ; Delhaye, Martin ; Simar, Aude. Fracture and mechanical properties of friction stir spot welds in 6063-T6 aluminum alloy. In: International Journal of Advanced Manufacturing Technology, Vol. 62, no. 5-8, p. 569-575 (septembre 2012). doi:10.1007/s00170-011-3795-3.
Fribourg, G. ; Bréchet, Yves ; Deschamps, A. ; Simar, Aude. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy. In: Acta Materialia, Vol. 59, no. 9, p. 3261-3635 (may 2011). doi:10.1016/j.actamat.2011.02.035.
Simar, Aude ; Lee Voigt, Hyon-Jee ; Wirth, Brian D.. Molecular dynamics simulations of dislocation interaction with voids in nickel. In: Computational Materials Science, Vol. 50, no. 4, p. 1811-1817 (2011). doi:10.1016/j.commatsci.2011.01.020.
Deplus, Kevin ; Simar, Aude ; Van Haver, W. ; de Meester de Betzenbroeck, Bruno. Residual stresses in aluminium alloy friction stir welds. In: International Journal of Advanced Manufacturing Technology, Vol. 56, p. 493-504 (2011). doi:10.1007/s00170-011-3210-0.
Simar, Aude ; Jonckheere, Caroline ; Deplus, K. ; Pardoen, Thomas ; de Meester de Betzenbroeck, Bruno. Comparing similar and dissimilar friction stir welds of 2017-6005A aluminium alloys. In: Science and Technology of Welding and Joining, Vol. 15, no. 3, p. 254-259 (2010). doi:10.1179/136217110X12665048207737.
Simar, Aude ; Nielsen, K. L. ; de Meester, B. ; Tvergaard, V. ; Pardoen, Thomas. Micro-mechanical modelling of ductile failure in 6005A aluminium using a physics based strain hardening law including stage IV. In: Engineering Fracture Mechanics, Vol. 77, no. 13, p. 2491-2503 (2010). doi:10.1016/j.engfracmech.2010.06.008.
Nielsen, K. L. ; Pardoen, Thomas ; Tvergaard, V. ; de Meester, B. ; Simar, Aude. Modelling of plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law. In: International Journal of Solids and Structures, Vol. 47, no. 18-19, p. 2359-2370 (2010). doi:10.1016/j.ijsolstr.2010.03.019.
Pardoen, Thomas ; Scheyvaerts, F. ; Simar, Aude ; Tekoglu, Cihan ; Onck, P.. Multiscale modelling of ductile failure in metallic alloys. In: Comptes rendus. Physique, Vol. 11, no. 3-4, p. 326-345 (2010). doi:10.1016/j.crhy.2010.07.012.
Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; de Meester de Betzenbroeck, Bruno ; Pardoen, Thomas. Strain hardening and damage in 6xxx series aluminium alloy friction stir welds. In: Materials Science Forum, Vol. 638-642, p. 333-338 (2010). doi:10.4028/www.scientific.net/MSF.638-642.333.
Simar, Aude ; Nielsen K. ; de Meester de Betzenbroeck, Bruno ; Pardoen, Thomas ; Tvergaard, V.. Strain hardening and damage in 6xxx series aluminum alloy friction stir welds. In: Materials Science Forum, Vol. 638-642, p. 333-338 (2010).
Simar, Aude ; Brechet, Y. ; de Meester, B. ; Denquin, A. ; Pardoen, Thomas. Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 486, no. 1-2, p. 85-95 (2008). doi:10.1016/j.msea.2007.08.041.
Simar, Aude ; Pardoen, Thomas ; de Meester, B.. Effect of rotational material flow on temperature distribution in friction stir welds. In: Science and Technology of Welding and Joining, Vol. 12, no. 4, p. 324-333 (2007). doi:10.1179/174329307X197584.
Gallais, C. ; Simar, Aude ; Fabregue, D. ; Denquin, A. ; Lapasset, G. ; de Meester, B. ; Brechet, Y. ; Pardoen, Thomas. Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 38A, no. 5, p. 964-981 (2007). doi:10.1007/s11661-007-9121-x.
Simar, Aude ; Brechet, Y. ; de Meester, B. ; Denquin, A. ; Pardoen, Thomas. Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6. In: Acta Materialia, Vol. 55, no. 18, p. 6133-6143 (2007). doi:10.1016/j.actamat.2007.07.012.
Simar, Aude ; Lecomte-Beckers, J ; Pardoen, Thomas ; de Meester, B.. Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding. In: Science and Technology of Welding and Joining, Vol. 11, no. 2, p. 170-177 (2006). doi:10.1179/174329306X84409.
De Vuyst, T. ; D'Alvise, L. ; Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Pierret, Stéphane. Finite Element Modelling of Friction Stir Welding of Aluminium alloy Plates - Inverse Analysis using a Genetic Algorithm. In: Welding in the World, Vol. 49, no. 3/4, p. 12 (2005).
Simar, Aude ; Poncelet, Olivier ; Desrayaud, Christophe ; Eimer, Eloise. Les microstructures des alliages d'aluminium. In: Sous la direction de Peyre, Patrice & Charkaluk, Eric, La fabrication additive des alliages métalliques 2 - microstructures, post-traitements et propriétés d'usage, 2022, p. 79-92. 9781789480559.
Arseenko, Mariia ; Gheysen, Julie ; Hannard, Florent ; Nothomb, Nicolas ; Simar, Aude. Self-Healing in Metal-Based Systems. In: Kanellopoulos, Antonios, Engineering Materials and Processes : Self-Healing Construction Materials, Springer, 2022, p. 43-78. 9783030868796. doi:10.1007/978-3-030-86880-2_3.
Simar, Aude ; Avettand-Fenoël, Marie-Noëlle. Friction Stir Processing for Architectured Materials. In: Estrin Y., Bréchet Y., Dunlop J., Fratzl P. (eds), Architectured Materials in Nature and Engineering (Springer Series in Materials Science; 282), Springer, Cham, 2019, p. 195-229. 978-3-030-11941-6. doi:10.1007/978-3-030-11942-3_7.
Bartlomiej Winiarski ; Gheysen, Julie ; Pyka, Grzegorz ; Florent Hannard ; Mariia Arseenko ; Julie Villanova ; Adam Brinek ; Ali Chirazi ; Lin Jiang ; Simar, Aude. Correlative Microscopy-assisted Investigation of AM-build Healable Al-Mg Alloy. Microscience Microscopy Congress 2023 (Manchester, UK, du 04/07/2023 au 06/07/2023).
De Raedemacker, Sophie ; Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Winiarski, Bartłomiej ; Tingaud, David ; Hocini, Azziz ; Villanova, Julie ; Smith, Albert ; Donoghue, Jack ; Simar, Aude. Design of a new high strength liquid assisted healable AlMg alloy produced by Laser Powder Bed Fusion (LPBF). International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (Technische Universität Wien, Austria, du 02/07/2023 au 07/07/2023).
De Raedemacker, Sophie ; Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Winiarski, Bartłomiej ; Tingaud, David ; Hocini, Azziz ; Villanova, Julie ; Smith, Albert ; Donoghue, Jack ; Jiang, Lin ; Simar, Aude. Development of a high strength liquid assisted healable modified AlMg alloy produced by additive manufacturing. The third European Conference on the Structural Integrity of Additively Manufactured Materials (Porto, Portugal, du 04/09/2023 au 06/09/2023).
De Raedemacker, Sophie ; Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Winiarski, Bartlomiej ; Tingaud, David ; Hocini, Azziz ; Villanova, Julie ; Smith, Albert ; Donoghue, Jack ; Jiang, Lin ; Simar, Aude. Development of a new healable aluminium alloy produced by Laser Powder Bed Fusion (LPBF) and improvement of its strength through strengthening element addition. 3rd Benelux Network Meeting & Workshop on Damage & Fracture Mechanics (BDFM-2023) (Antwerp, Belgium, 25/05/2023). In: BDFM-2023_Book of abstracts, 2023, p. Poster No. 15.
Nothomb, Nicolas ; Longin, Julien ; Rodriguez-Barber, Ignacio ; Pérez Prado, Maria Teresa ; Avettand-Fénoël, Marie-Noeëlle ; Simar, Aude. Fully dense Al7075 produced by laser powder bed fusion (L-PBF) undergoing a tailored innovative heat treatment showing high tensile properties and interesting fatigue crack growth behaviour. 3rd Benelux Network Meeting & Workshop on Damage & Fracture Mechanics (BDFM-2023) (Antwerp, Belgium, 25/05/2023). In: BDFM-2023_Book of abstracts, 2023, p. Poster No. 10.
Simar, Aude. Healing damage in aluminium alloys. 3rd Benelux Network Meeting & Workshop on Damage & Fracture Mechanics (BDFM-2023) (Antwerp, Belgium, 25/05/2023).
Krishnamurthy, Sanjay Channappa ; Simar, Aude. Process parameter influence and characterization of spot friction melt bonded titanium and aluminium alloy. IIW Commission III Intermediate Meeting 2023 (Paris, France, du 30/01/2023 au 01/02/2023).
Li, Jishuai ; Jadot, Matthieu ; Simar, Aude. Additive friction stir deposition of aluminium AA7075: identification of the process window, microstructure and mechanical properties. Joint International Symposium on Friction Stir Welding and Processing (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Simar, Aude ; Hannard, Florent. Architecturation par FSP. MECAMAT 2022 (Aussois, France, du 17/01/2022 au 21/01/2022).
Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Villanova, Julie ; Chirazi, Ali ; Brinek, Adam ; Simar, Aude. Characterization of a newly developed liquid assisted healable Al alloy produced for Laser Powder Bed Fusion (LPBF). 1st International Conference on Advanced Manufacturing (online, du 07/03/2022 au 10/03/2022).
Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Julie Villanova ; Nothomb, Nicolas ; David Tingaud ; Arseenko, Mariia ; Simar, Aude. Characterization of the Healability of Aluminium Alloys Produced by Laser Powder Bed Fusion (L-PBF) Using X-ray Nanoholotomography at Synchrotron (ESRF). The Minerals, Metals & Materials Society - 151st Annual Meeting & Exhibition (Los Angeles, du 27/02/2022 au 03/03/2022).
Gheysen, Julie ; Bartlomiej Winiarski ; Chirazi, Ali ; Brinek, Adam ; Pyka, Grzegorz ; Simar, Aude. Correlative Tomography for micro- and nano- scale defects reduction analysis in Additive Manufactured healable aluminium alloy. iCT2022, 11th Conference on Industrial Computed Tomography (online, du 08/02/2022 au 11/02/2022).
Gheysen, Julie ; Pyka, Grzegorz ; Winiarski, Bartlomiej ; Hannard, Florent ; Arseenko, Mariia ; Villanova, Julie ; Brinek, Adam ; Chirazi, Ali ; Simar, Aude. Correlative tomography-based characterization of a newly developed liquid assisted healable Al alloy. ictms2022 : 5th International Conference on Tomography of Materials and Structures (Grenoble, France, du 27/06/2022 au 01/07/2022).
Arseenko, Mariia ; Hannard, Florent ; Kashiwar, Ankush ; Ding, Lipeng ; Villanova, Julie ; Zhao, LV ; Maire, Eric ; Idrissi, Hosni ; Simar, Aude. Design, Friction Stir Processing and characterization of a new healable aluminium alloy. ICSHM-MILANO 2022: 8th International Conference on Self-Healing Materials (Milano, Italy, du 20/06/2022 au 22/06/2022).
Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Arseenko, Mariia ; Villanova, Julie ; Tingaud, David ; Hocini, Azziz ; Simar, Aude. Development of a new liquid assisted healable AlMg alloy produced for Laser Powder Bed Fusion (LPBF). EMMC18: 18th European Mechanics of Materials Conference (Oxford, du 04/04/2022 au 06/04/2022).
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Charkaluk, Eric ; Simar, Aude. Enhancing fatigue crack growth resistance of high strength aluminum alloys reinforced by shape memory alloy. TMS 2022 (Anaheim, California, USA, du 27/02/2022 au 03/03/2022).
Gomes Affonseca Netto, Nelson ; Hannard, Florent ; Zhao, Lv ; Charkaluk, Eric ; Simar, Aude. Enhancing fatigue crack growth resistance on Al7075/NiTi composites manufactured by Friction Stir Processing. FSW jointed Symposium (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Rinchard, Vincent ; Nothomb, Nicolas ; Marchal, Yves ; Simar, Aude. FSW and subsequent creep forming on Al5028 alloy designed for aircraft application. Joint International Symposium on Friction Stir Welding and Processing (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Nothomb, Nicolas ; van der Rest, Camille ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Delmée, Maxime ; Simar, Aude. Fatigue life improvement of high strength aluminium alloys produced by laser powder bed fusion (L-PBF). EMMC18: 18th European Mechanics of Materials Conference (Oxford, UK, du 04/04/2022 au 06/04/2022).
Dimov, Nicolas ; Sapanathan, Thaneshan ; Benoist, Julien ; Charkaluk, Eric ; Simar, Aude. Fatigue life of dissimilar AA6061-AA7075 FSW joints. Joint International Symposium on Friction Stir Welding and Processing (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Van Hooreweder, Brecht ; Buffière, Jean-Yves ; Bacroix, Brigitte ; Tingaud, David ; Pyka, Grzegorz ; Zhao, Lv ; Simar, Aude. Fatigue resistance improvement of laser powder bed fusion AlSi10Mg by post-processing. TMS 2022 (Anaheim, California, USA, du 27/02/2022 au 03/03/2022).
Ryelandt, Sophie ; Marchal-Marchant, Valentin ; Sapanathan, Thaneshan ; Simar, Aude. Friction Melt Bonding of steels to aluminium: on the importance of the welding parameters control to obtain performant joints. Joint International Symposium on Friction Stir Welding and Processing (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Arseenko, Mariia ; Hannard, Florent ; Ding, Lipeng ; Kashiwar, Ankush ; Paccou, E. ; Zhao, Lv ; Pyka, Grzegorz ; Idrissi, Hosni ; Lefebvre, William ; Villanova, Julie ; Maire, Eric ; Gheysen, Julie ; Simar, Aude. Healing Damage in Friction Stir Processed Mg2Si reinforced Al alloy . The Minerals, Metals & Materials Society - 151st Annual Meeting & Exhibition (Anaheim, du 27/02/2022 au 03/03/2022).
Gomes Affonseca Netto, Nelson ; Hannard, Florent ; Zhao, Lv ; Charkaluk, Eric ; Simar, Aude. Improving fatigue crack growth resistance through local internal stresses of high strength aluminum alloys reinforced by shape memory alloy. 18th European Mechanics of Materials Conference (EMMC18) (Oxford, UK, du 04/04/2022 au 06/04/2022).
Gheysen, Julie ; Pyka, Grzegorz ; Hannard, Florent ; Villanova, Julie ; Winiarski, Bartłomiej ; Simar, Aude. Investigation of the healing ability of a newly developed AlMg alloy produced for Laser Powder Bed Fusion (LPBF). Self-Healing Materials ICSHM 2022 (Milano, du 20/06/2022 au 22/06/2022).
Krishnamurthy, Sanjay Channappa ; Dimov, Nicolas ; Sapanathan, Thaneshan ; Charkaluk, Eric ; Benoist, Julien ; Simar, Aude. Joining dissimilar titanium and aluminium alloy by friction stir welding and friction melt bonding process. Joint International Symposium on Friction Stir Welding and Processing (Lüneburg, Germany, du 28/09/2022 au 30/09/2022).
Gheysen, Julie ; Brinek, Adam ; Winiarski, Bartlomiej ; Chirazi, Ali ; Pyka, Grzegorz ; Kaiser, Jozef ; Villanova, Julie ; Simar, Aude. Multimodal and multi-resolution approach for defects analysis on the example of Additively Manufactured healable aluminium alloy. 16th Multinational Congress on Microscopy (16MCM) (Brno, Czech Republic, du 04/09/2022 au 09/09/2022).
Hoult, Ryan ; Saraiva Esteves Pacheco De Almeida, João ; Lezaack, Matthieu Baudouin ; Simar, Aude. Reinforced concrete walls detailed with shape memory alloys: recent experimental and numerical investigations. 3rd European Conference on Earthquake Engineering and Seismology (Bucharest, Romania, du 04/09/2022 au 09/09/2022).
Lakhdari, Mohammed-Ali ; Estevez, Rafael ; Véron, Murien ; Gomes Affonseca Netto, Nelson ; Delannay, Laurent ; Simar, Aude. Résistance à la fissuration accrue d’alliages d’aluminium renforcés par des particules de NiTi et champs de contraintes contrôlés. Conférence Internationale Matériaux 2022 (Lille, France, du 24/10/2022 au 28/10/2022).
Voet, Vincent ; De Fruytier, Christophe ; Simar, Aude ; Pardoen, Thomas. Thermal ageing of electronic component solder joints for space applications: a combined finite element and deep learning approach. ICAM22 (Virtual conference, du 07/03/2022 au 10/03/2022).
Poncelet, Olivier ; van der Rest, Camille ; Marteleur, Matthieu ; Simar, Aude. A roughness study by modeling L-PBF surfaces. ESIMA 2021 (On line, du 08/09/2021 au 10/09/2021).
Santos Macias, Juan Guillermo ; Douillard, Thierry ; Zhao, Lv ; Maire, Eric ; Pyka, Grzegorz ; Simar, Aude. Build platform temperature during laser powder bed fusion of AlSi10Mg; influence on 3D microstructure, strength and ductility. ESAFORM2021 (Online Conference (Liège), du 14/04/2021 au 16/04/2021).
Gheysen, Julie ; Bart Winiarski ; Ali Chirazi ; Adam Brinek ; Zhu, Yifan ; Pyka, Grzegorz ; Simar, Aude. Correlative Tomography for micro- and nano- scale porosity reduction analysis in Additive Manufactured healable aluminium alloy. mmc2021 — Microscience Microscopy Congress 2021 (virtual conference, du 05/07/2021 au 08/07/2021).
Simar, Aude ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Poncelet, Olivier ; van der Rest, Camille. Damage and fatigue enhancements by post-processing of additive manufactured (L-PBF) AlSi10Mg. University of Shanghai - webinar (online, 14/09/2021).
Simar, Aude ; Santos Macias, Juan Guillermo ; Zhao, Lv. Damage and fatigue life enhancements by post-processing of additive manufactured (L-PBF) AlSi10Mg. SFI PhysMet Webinar series 2021 (Online, 19/05/2021).
Han, Sutao ; Lezaack, Matthieu Baudouin ; Simar, Aude ; Hannard, Florent. Ductility and Formability Enhancement by FSP in 7XXX Al alloys. LightMat 2021 (Virtual conference, du 02/11/2021 au 04/11/2021).
Gheysen, Julie ; Marteleur, Matthieu ; Camille van de Rest ; Simar, Aude. Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense parts validated on AlSi12 alloy. ESIAM21-The second European Conference on the Structural Integrity of Additively Manufactured Materials (online, du 08/09/2021 au 10/09/2021).
van der Rest, Camille ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Marteleur, Matthieu ; Jacques, Pascal ; Simar, Aude. Enhancement of the mechanical behavior of SLM AlSi10Mg by optimized thermomechanical postprocessing routes. THERMEC 2021 (Vienne, Austria (Virtual Conference), du 10/05/2021 au 14/05/2021). In: THERMEC‘2021 – Book of Abstracts, 2021, p. 701 (#1390).
van der Rest, Camille ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Smits, Antoine ; Simar, Aude. Enhancement of the mechanical behaviour of L-PBF AlSi10Mg by optimized thermomechanical post-processing routes. ESIAM21 (Online, du 08/09/2021 au 10/09/2021).
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Ding, Lipeng ; Idrissi, Hosni ; Soete, Jeroen ; Pyka, Grzegorz ; Charkaluk, Eric ; Simar, Aude. Enhancing resistance to fracture in light metals: From Al1050 fracture toughness to Al7075 fatigue crack growth rate. THERMEC 2021 (Vienne, Austria (Online Conference), du 09/05/2021 au 14/05/2021). In: Thermec 2021 - Book of Abstracts, 2021.
Dimov, Nicolas ; Weisz-Patrault, Daniel ; Tanguy, Alexandre ; Sapanathan, Thaneshan ; Benoist, Julien ; Charkaluk, Eric ; Simar, Aude. Fatigue life of dissimilar 6061/7071 FSW joints : characterization by means of fractography. Réunion de la commission mixte SF2M-AFM sur le soudage FSW/P et à l'état solide (Paris, 08/11/2021).
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Buffière, Jean-Yves ; Van Hooreweder, Brecht ; Simar, Aude. Friction malaxage et impression 3D: Amélioration du comportement mécanique de l'AlSi10Mg de fabrication additive via FSP. Réunion de la commission mixte SF2M-AFM sur le soudage FSW/P et à l'état solide (Paris, 08/11/2021).
Simar, Aude ; Hannard, Florent ; Lezaack, Matthieu ; Han, Sutao ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Gomes Affonseca Netto, Nelson ; Arseenko, Mariia ; Gheysen, Julie ; Nothomb, Nicolas ; Idrissi, Hosni ; Ding, Lipeng ; Kashiwar, Ankush ; Pyka, Grzegorz. Friction stir: much more than welding!. Conference at the University of Rouen (Rouen, France, 18/10/2021).
Nothomb, Nicolas ; Delmée, Maxime ; Gheysen, Julie ; Van Hooreweder, Brecht ; Simar, Aude. Hot cracking suppression by powder modification of an Al7075 alloy produced by laser powder bed fusion (L-PBF) and first insights in the improvement of its fatigue life. ESIAM 2021 (Virtual conference, du 08/09/2021 au 10/09/2021).
Dimov, Nicolas ; Sapanathan, Thaneshan ; Simar, Aude ; Charkaluk, Eric ; Benoist, Julien. Local damage behaviour of friction stir-welded AA6061 /AA7075 under fatigue and static loading. ESAFORM 2021 (Virtual Conference (Liège), du 14/04/2021 au 16/04/2021).
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Charkaluk, Eric ; Hosdez, Jérôme ; Simar, Aude. On the fatigue crack growth resistance of aluminum matrix composites reinforced by shape memory alloys. ESAFORM2021 (Online Conference, du 14/04/2021 au 16/04/2021).
Arseenko, Mariia ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Production of a healable Al-based Metal Matrix Composites by Friction Stir Processing. THERMEC 2021 (Vienne, Austria (Virtual Conference), du 10/05/2021 au 14/05/2021). In: THERMEC‘2021 – Book of Abstracts, 2021, p. 58-59 (#115).
Sapanathan, Thaneshan ; Ryelandt, Sophie ; Miotti Bettanini, Alvise ; Jacques, Pascal ; Simar, Aude. Segregation of alloying elements on the hot tear formation in friction melt bonding of Al/steel joints. ESAFORM 2021 (On line, du 14/04/2021 au 16/04/2021).
Dimov, Nicolas ; Charkaluk, Eric ; Sapanathan, Thaneshan ; Simar, Aude ; Vasquez, Elodie ; Benoist, Julien. Soudage dissimilaire AA6061 /AA7075 : identification de la fenêtre de paramètres procédé, microstructures et essais statiques. Commission FSW/P de la SF2M et AFM (online, 23/02/2021).
Voet, Vincent ; Van Loock, Frederik ; De Fruytier, Christophe ; Simar, Aude ; Pardoen, Thomas. Thermal ageing of electronic component solder joints for space applications. Colloque Assemblages Mécaniques, Supméca (Saint Ouen, France, du 01/07/2021 au 02/07/2021).
Voet, Vincent ; Van Loock, Frederik ; De Fruytier, Christophe ; Simar, Aude ; Pardoen, Thomas. Thermal ageing of electronic component solder joints for space applications. COMPLAS (Barcelona, Spain, du 07/09/2021 au 09/09/2021).
Lezaack, Matthieu Baudouin ; Hannard, Florent ; Simar, Aude. Towards high strength and high ductility 6XXX and 7XXX aluminium alloys. ESAFORM 2021 (On line, du 14/04/2021 au 16/04/2021).
Simar, Aude ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Poncelet, Olivier ; van der Rest, Camille. Towards improved mechanical properties of aluminum alloys processed by laser powder bed fusion. conférence à ESAM Metz (Metz, 28/10/2021).
Lezaack, Matthieu ; Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Charkaluk, Eric ; Simar, Aude. Éviter la croissance anormale de grain et restaurer les propriétés mécaniques du matériau de base lors d'un post-traitement T6 dans des alliages série 7xxx soudé par FSW. Réunion de la commission mixte SF2M-AFM sur le soudage FSW/P et à l'état solide (Paris, 08/11/2021).
Gheysen, Julie ; Marteleur, Matthieu ; Van Der Rest, Camille ; Pyka, Grzegorz ; Simar, Aude. First insight in the development by L-PBF of healable aluminium alloys. International conference on aluminium alloys ICAA17 (Grenoble, du 26/10/2020 au 29/10/2020).
Simar, Aude. Improving mechanical properties of selective laser melted aluminum alloy AlSi10Mg. India-UK SPARC Webinar on “Metal Additive Manufacturing and Friction Stir Processing: Present and Future” (India (Webinar), du 16/09/2020 au 17/09/2020).
Hannard, Florent ; Maire, Eric ; Morgeneyer, Thilo ; Pardoen, Thomas ; Simar, Aude. Microstructure heterogeneity dominated ductile fracture of 6xxx aluminium alloys. ICAA (virtual conference, du 27/10/2020 au 28/10/2020).
Sapanathan, Thaneshan ; Ding, Lipeng ; Miotti Bettanini, Alvise ; Ilchat Sabirov ; Miguel A. Monclús ; Peikang Xia ; Jon M. Molina-Aldareguia ; Idrissi, Hosni ; Jacques, Pascal ; Simar, Aude. On the formation of modified intermetallics at an Al/Fe interface via segregated Si. Material Science and Engineering Congress - MSE 2020 (Darmstadt, Germany (Online this year), du 22/09/2020 au 25/09/2020).
Sapanathan, Thaneshan ; Norberto Jimenez-Mena ; Jean-Marie Drezet ; Sandra Cabeza ; Thilo Pirling ; Jacques, Pascal ; Simar, Aude. Residual stress measurement in dissimilar metal joints using neutron diffraction. ESS - ILL Topical Workshop on Imaging, Materials and Engineering (Stockholm, Sweden (Presented online this year), du 14/10/2020 au 15/10/2020).
Lezaack, Matthieu Baudouin ; Simar, Aude. Thick 7XXX friction stir welds resistant to coarse recrystallization during solution heat treatments. ICAA 2020: 17th International conference on aluminium alloys (Grenoble (online), du 26/10/2020 au 29/10/2020).
Lezaack, Matthieu Baudouin ; Zhao, Lv ; Simar, Aude. Amélioration de la ductilité de l’alliage d’aluminium 7475 par procédé de friction malaxage (FSP). Rupture des matériaux et des structures - Mécanismes et modélisations face aux applications industrielles (Aussois, du 21/01/2019 au 25/01/2019).
Dolimont, A. ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Simar, Aude ; Rivière-Lorphèvre, E.. Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM). 4th Workshop on metal additive manufacturing (Thermotechnical Institute - KU Leuven - Belgium, du 27/05/2019 au 28/05/2019).
Santos Macias, Juan Guillermo ; Zhao, Lv ; Simar, Aude. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. 4th workshop on metal additive manufacturing (Thermotechnical Institute - KU Leuven - Belgium, du 27/05/2019 au 28/05/2019).
Velard, Corentin ; Simar, Aude ; Blandin, Jean-Jacques ; Ferrie, Emilie ; Roche, Virginie. Development of various microstructures by Friction Stir Processing to modify deeply the corrosion behavior and biodegradability of Mg-2%Ca alloy. FSWP2019 (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Lezaack, Matthieu Baudouin ; Simar, Aude ; Zhao, Lv. Ductilization by multi-pass Friction Stir Processing of thick 7475 aluminium alloy. LightMAT 2019 (Manchester, UK, du 05/11/2019 au 07/11/2019).
Lezaack, Matthieu Baudouin ; Zhao, Lv ; Simar, Aude. Ductilization of 7475 aluminium alloy by Friction Stir Processing: homogenization of microstructural constituents. 6th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Marteleur, Matthieu ; van der Rest, Camille ; Couturiaux, Gaelle ; Godet, Stéphane ; Jacques, Pascal ; Simar, Aude. Effect of process parameters and post-treatments on the mechanical static and fatigue properties of SLM AlSi10Mg alloy. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) (Trondheim, Norway, du 09/09/2019 au 11/09/2019).
Poncelet, Olivier ; van der Rest, Camille ; Marteleur, Matthieu ; Rigo, Oliver ; Adrien, Jérôme ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Effect of scanning strategies and laser parameters on roughness, porosities and hardness of SLM AlSi10Mg thin-walls. 4th Workshop on metal additive manufacturing (Thermotechnical Institute, KU Leuven, Belgium, du 27/05/2019 au 28/05/2019) (Soumis).
Poncelet, Olivier ; van der Rest, Camille ; Marteleur, Matthieu ; Rigo, Olivier ; Adrien, Jérôme ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Effect of scanning strategy and laser parameters on roughness, porosities and hardness of SLM AlSi10Mg thin-walls. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) (Trondheim, Norway, du 09/09/2019 au 11/09/2019). In: Proceedings of First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19), 2019.
Gheysen, Julie ; van der Rest, Camille ; Marteleur, Matthieu ; Simar, Aude. First insight in the development of a healable aluminum alloy processed by SLM. 4th Workshop on metal additive manufacturing (Thermotechnical Institute - KU Leuven - Belgium, du 27/05/2019 au 28/05/2019).
Simar, Aude ; Arseenko, Mariia ; Zhao, Lv ; Gomes Affonseca Netto, Nelson ; Ding, Lipeng ; Idrissi, Hosni. Friction Stir Processed Al alloys for damage mitigation and healing. LightMAT 2019 (Manchester, UK, du 05/11/2019 au 07/11/2019).
Santos Macias, Juan Guillermo ; Zhao, Lv ; Elangeswaran, Chola ; Van Hooreweder, Brecht ; Adrien, Jérôme ; Buffière, Jean-Yves ; Maire, Eric ; Simar, Aude. Friction stir processing of selective laser melted AlSi10Mg for mechanical behaviour enhancement. Study on damage mechanism evolution. 6th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Huang, Chunjie ; Zhao, Lv ; Yan, Xingchen ; Liu, Min ; Ma, Wenyou ; Wang, Weibing ; Soete, Jeroen ; Simar, Aude. Friction stir processing on Ti6Al4V produced by Selective Laser Melting: microstructure and mechanical properties. 6th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Arseenko, Mariia ; Zhao, Lv ; Ding, Lipeng ; Idrissi, Hosni ; Eric Maire ; Julie Villanova ; Simar, Aude. Healable Al alloys production by Friction Stir Processing. The 6th International Conference on Scientific and Technical Advances on Friction stir Welding & Processing (FSWP’2019) (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Simar, Aude ; Santos Macias, Juan Guillermo ; Poncelet, Olivier ; van der Rest, Camille ; Marteleur, Matthieu ; Elangeswaran, Chola ; Van Hooreweder, Brecht ; Maire, Eric ; Adrien, Jérôme ; Buffière, Jean-Yves. Improving fatigue resistance of selective laser melted aluminum alloy AlSi10Mg. MRS spring meeting 2019 (Phoenix, USA, du 22/04/2019 au 26/04/2019). In: Proceedings of MRS spring meeting 2019, 2019.
Arseenko, Mariia ; Ding, Lipeng ; Simar, Aude ; Idrissi, Hosni. In-situ TEM observation of healing process in Al 6xxx based alloy. Royal Belgian Society of Microscopy (RBSM) meeting (Louvain-la-Neuve, Belgium, 09/09/2019).
Arseenko, Mariia ; Ding, Lipeng ; Idrissi, Hosni ; Maire, Eric ; Villanova, Julie ; Zhao, Lv ; Simar, Aude. Investigation of Healing Ability of 6XXX Series Based Al Alloy Produced by Friction Stir Processing. 7th International Conference on Self-Healing Materials (ICSHM2019) (Yokohama, Japan, du 02/06/2019 au 05/06/2019).
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Ding, Lipeng ; Soete, Jeroen ; Idrissi, Hosni ; Simar, Aude. Manufacturing High Strength Aluminum Matrix Composites by Friction Stir Processing: an Innovative Approach. 6th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Pardoen, Thomas ; Hannard, Florent ; Ismail, Karim ; Miotti Bettanini, Alvise ; Lecarme, Liza ; Maire, Eric ; Perlade, Astrid ; Mithieux, Jean-Denis ; Brassart, Laurence ; Delannay, Laurent ; Jacques, Pascal ; Simar, Aude. Microstructure heterogeneity dominated ductile fracture. 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (Ankara, Turkey, du 22/08/2019 au 23/08/2019).
Sapanathan, Thaneshan ; Jimenez-Mena, Norberto ; Drezet, Jean-Marie ; Cabeza, Sandra ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Residual stresses in Al6061/DP600 welds produced by a process derived from Friction Stir Welding. 6th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Louvain-la-Neuve, Belgium, du 11/09/2019 au 13/09/2019).
Dimov, Nicolas ; Sapanathan, Thaneshan ; Charkaluk, Eric ; Simar, Aude ; Benoist, Julien. Study of dissimilar metallic assembly through friction stir welding & friction melt bonding. 6th International Conference on Scientific and Technical Advances on Friction stir Welding & Processing (FSWP’2019) (Louvain la neuve, du 11/09/2019 au 13/09/2019).
Ryelandt, Sophie ; Kairet, Thomas ; Simar, Aude. Tensile and toughness behaviour of SLM processed Al-Mg-Sc-Zr alloy. 4th Workshop on metal additive manufacturing (Thermotechnical Institute - KU Leuven - Belgium, du 27/05/2019 au 28/05/2019).
Simar, Aude ; Santos Macias, Juan Guillermo ; van der Rest, Camille ; Marteleur, Matthieu ; Jacques, Pascal. Amélioration des propriétés mécaniques d'alliage ALM d'aluminium AlSi10Mg . Colloque de Physique des deux infinis (Orsay, France, du 13/12/2018 au 14/12/2018).
Amani, Yasin ; Dancette, Sylvain ; Maire, Eric ; Delroisse, Pauline ; Simar, Aude. Compression behaviour of cellular structures produced by selective laser beam additive manufacturing: X-ray tomography based finite element and experimental approaches. EMMC16 - 16th European Mechanics of Materials Conference (Nantes, France, du 26/03/2018 au 28/03/2018).
Jacques, Pascal ; Delroisse, Pauline ; Simar, Aude ; Georges, Cédric. Critical assessment of the hydrogen uptake during the powder-bed laser 3D-printing of Al-Si grade. THERMEC'2018, International Conference on Processing & Manufacturing of Advanced Materials (Paris, France, du 08/07/2018 au 13/07/2018).
Jacques, Pascal ; Delroisse, Pauline ; Simar, Aude ; Georges, Cédric. Critical assessment of the hydrogen uptake during the powder-bed laser 3D-printing of Al-Si grade. Steel Hydrogen 2018 (Ghent, du 29/05/2018 au 31/05/2018).
Marteleur, Matthieu ; van der Rest, Camille ; Delroisse, Pauline ; Simar, Aude ; Jacques, Pascal. Critical assessment of the hydrogen uptake during the powder-bed laser 3D-printing of Al-Si grade. 3rd Workshop on Metal Additive Manufacturing (Liège, du 28/05/2018 au 29/05/2018).
van der Rest, Camille ; Marteleur, Matthieu ; Simar, Aude ; Jacques, Pascal. Effect of process parameters and post-treatments on the mechanical static and fatigue properties of AlSi10Mg SLM samples. 3rd Workshop on Metal Additive Manufacturing (Liège).
Poncelet, Olivier ; Van Der Rest, Camille ; Marteleur, Matthieu ; Simar, Aude. Effect of scan strategy and laser parameters on roughness of SLM AlSi10Mg thin-walls. 3rd Workshop on Metal Additive Manufacturing (Liège, du 28/05/2018 au 29/05/2018).
Zhao, Lv ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Enhancement of fracture resistance by crack deviation via shape memory alloy agents. IUTAM Symposium on Size-effect in Microstructure and Damage Evolution (copenhagen, Danmark, du 28/05/2018 au 01/06/2018).
Arseenko, Mariia ; Hannard, Florent ; Zhao, Lv ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. First steps towards the healable aluminum alloys. IUTAM Symposium on Size-effect in Microstructure and Damage Evolution (Copenhagen, Denmark, du 28/05/2018 au 01/06/2018).
Zhao, Lv ; Simar, Aude ; Turteltaub, Sergio. Fracture investigation in Al/NiTip composite manufactured by friction stir processing. EMMC16 - 16th European Mechanics of Materials Conference (Nantes, France, du 26/03/2018 au 28/03/2018).
Simar, Aude ; Delroisse, Pauline ; Jacques, Pascal ; Marteleur, Matthieu ; Poncelet, Olivier ; Santos Macias, Juan Guillermo ; van der Rest, Camille. Mechanical properties of selective laser melted aluminium alloy AlSi10Mg: from bulk to thin structures. International Conference on Advanced Materials, Mechanics and Manufacturing (A3M) (Hammamet, Tunisia, du 17/12/2018 au 19/12/2018). In: Proceedings of the International Conference on Advanced Materials, Mechanics and Manufacturing (A3M), 2018.
Lezaack, Matthieu Baudouin ; Simar, Aude. Micro-hardness evolution in Friction Stir Processed 7475 aluminium plate. Colloque Indentation 2018 (Liège, du 11/09/2018 au 14/09/2018).
Lezaack, Matthieu Baudouin ; Florent, Hannard ; Simar, Aude. Modifications des propriétés d’endommagement de l’aluminium 7475 en tôle de forte épaisseur par le procédé de friction-malaxage. Matériaux 2018 (Strasbourg, France, du 18/11/2018 au 23/11/2018).
Jimenez Mena, Norberto ; Sapanathan, Thaneshan ; Drezet, Jean-Marie ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Neutron diffraction residual stress measurements in aluminum/steel welds produced by Friction Melt Bonding. European Conference on Residual Stresses - ECRS10 (Leuven, Belgium, du 11/09/2018 au 14/09/2018).
Zhao, Lv ; Simar, Aude ; Turteltaub, Sergio. On the fracture of Al/NiTi composite manufactured by friction stir processing. THERMEC'2018 (Paris, France, du 08/07/2018 au 13/07/2018).
Santos Macias, Juan Guillermo ; Buffière, Jean-Yves ; Maire, Eric ; Adrien, Jérôme ; Elangeswaran, Chola ; Cutolo, Antonio ; Van Hooreweder, Brecht ; Lani, Frédéric ; Jacques, Pascal ; Simar, Aude. On the mechanical behaviour of SLM AlSi10Mg and its improvement by friction stir processing. EMMC16 - 16th European Mechanics of Materials Conference (Nantes, France, du 26/03/2018 au 28/03/2018).
Santos Macias, Juan Guillermo ; Jacques, Pascal ; Bacroix, Brigitte ; Van Hooreweder, Brecht ; Elangeswaran, Chola ; Maire, Eric ; Adrien, Jérôme ; Simar, Aude. Post-treatment of additive manufactured aluminium parts: Friction stir processing and hot isostatic pressing . ICEM 2018 - 18th international conference on experimental mechanics (Brussels, Belgium, du 01/07/2018 au 05/07/2018). In: Proceedings of the ICEM 2018 - 18th international conference on experimental mechanics, 2018.
Hannard, Florent ; Simar, Aude ; Pardoen, Thomas ; Maire, Eric. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. 16th European Mechanics of Materials Conference (Nantes, France, du 26/03/2018 au 28/03/2018).
Santos Macias, Juan Guillermo ; Jacques, Pascal ; Van Hooreweder, Brecht ; Elangeswaran, Chola ; Lani, Frédéric ; Maire, Eric ; Adrien, Jérôme ; Simar, Aude. SLM AlSi10Mg mechanical behaviour improvement by friction stir processing . 3rd Workshop on Metal Additive Manufacturing (Liège, Belgium, du 28/05/2018 au 29/05/2018). In: Proceedings of the 3rd Workshop on Metal Additive Manufacturing, 2018.
Sapanathan, Thaneshan ; Jimenez Mena, Norberto ; Sabirov, Ilchat ; Molina-Aldareguia, Jon ; Monclus, Miguel ; Simar, Aude. Thermomechanical physical simulation of friction melt bonding for dissimilar Al/steel joints. THERMEC'2018, International Conference on Processing & Manufacturing of Advanced Materials (Paris, France, du 08/07/2018 au 13/07/2018).
van der Rest, Camille ; Marteleur, Matthieu ; Poncelet, Olivier ; Simar, Aude ; Jacques, Pascal. Additive manufacturing of AlSi10Mg: from microstructure to mechanical behaviour. Conception d’alliages métalliques (Aussois, France).
Delroisse, Pauline ; Rigo, Olivier ; Jacques, Pascal ; Simar, Aude. AlSi10Mg lattice structures processed by selective laser melting: influence of the geometry and the heat treatments on the microstructure. TMS 2017 (San Diego, USA, du 26/02/2017 au 02/03/2017).
Simar, Aude. Damage in aluminium alloys. Seminar on "new aluminium alloys", invited by Skywin (Liège, Belgium, 22/11/2017).
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Simar, Aude. Ductilization of aluminium alloy 6056 by friction stir processing. FSWP 2017 (Metz, France, du 11/10/2017 au 13/10/2017).
Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas ; Simar, Aude. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. TMS 2017 (San Diego, USA, du 26/02/2017 au 02/03/2017).
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Simar, Aude. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. FSWP 2017 (Metz, France, du 11/10/2017 au 13/10/2017).
Simar, Aude. Endommagement dans les alliages métalliques. Ecole Doctorale (Aussois, France, du 26/11/2017 au 01/12/2017).
Santos Macias, Juan Guillermo ; Van Hooreweder, Brecht ; Maire, Eric ; Adrien, Jérôme ; Jacques, Pascal ; Simar, Aude. Friction stir processing of additive manufactured AlSi10Mg parts to improve mechanical behaviour. FSWP2017 - 5th International Conference on Scientific and Technial Advances on Friction Stir Welding & Processing (Metz, France, du 11/10/2017 au 13/10/2017). In: Proceedings of the 5th International Conference on Scientific and Technial Advances on Friction Stir Welding & Processing, 2017.
Delroisse, Pauline ; Bruzy , Nicolas ; Rigo, Olivier ; Michotte, Sébastien ; Maire, Eric ; Jacques, Pascal ; Massart, Thierry ; Simar, Aude. Impact behavior of lattice structures produced by selective laser melting. TMS 2017 (San Diego, USA, du 26/02/2017 au 02/03/2017).
Santos Macias, Juan Guillermo ; Jacques, Pascal ; Adrien, Jérôme ; Maire, Eric ; Lani, Frédéric ; Michotte, Sébastien ; Simar, Aude. Mechanical behaviour enhancement of SLM AlSi10Mg by friction stir processing. Workshop on metal AM (Louvain-la-Neuve, Belgium, du 27/06/2017 au 28/06/2017).
Simar, Aude ; Mertens, Anne ; Brassart, Laurence ; Lecomte-Beckers, Jacqueline ; Delannay, Francis. Micro-mechanical testing of magnesium based composites reinforced by carbon fibers manufactured by friction stir processing. TMS 2017 (San Diego, USA, du 26/02/2017 au 02/03/2017).
Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier ; Michotte, Sébastien ; Simar, Aude. Microstructure and porosity of AlSi10Mg parts processed by SLM: Influence of sample orientation and heat treatments. Workshop on metal AM (Louvain-la-Neuve, Belgium, du 27/06/2017 au 28/06/2017).
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Le Bourlot, C. ; Pardoen, Thomas. Étude de l’impact du procédé de friction malaxage sur la rupture ductile dans les alliages d’aluminium. Journées annuelles de la SF2M, Matériaux, microstructures et fonctionnalités (Lyon, France, du 23/10/2017 au 25/10/2017). In: book of abstracts - SF2M 2017, 2017, JA0057.
Simar, Aude ; Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier. Aluminum lattice structures processed by additive manufacturing - Mechanical properties and microstructural characterization. Journées annuelles de la SF2M (Albi, France, du 25/10/2016 au 267/10/2016).
Delroisse, Pauline ; Rigo, Olivier ; Maire, Eric ; Jacques, Pascal ; Simar, Aude. Aluminum lattice structures processed by additive manufacturing: Mechanical and microstructural characterization. Workshop on additive manufacturing (Bruxelles, du 26/05/2016 au 27/05/2016).
Shabadi, Rajashekhara ; Gudla, Visweswara ; Rajan, Ambat ; Jensen, Flemming ; Simar, Aude. Anodization behaviour of friction stir processed aluminium surface composites. Thermec 2016 (Graz, Austria, du 29/05/2016 au 03/06/2016).
Delroisse, Pauline ; Rigo, Olivier ; Jacques, Pascal ; Simar, Aude. Caractérisation de la résistance à l'impact de structures lattices en AlSi10Mg obtenues par Fabrication additive (SLM). Journées annuelles de la SF2M (Albi, France, du 25/10/2016 au 27/10/2016).
Simar, Aude ; Hannard, Florent ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. 11th International Friction Stir Welding Symposium (Cambridge, UK, du 17/05/2016 au 19/05/2016).
Hannard, Florent ; Simar, Aude ; Pardoen, Thomas ; Maire, Eric. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. Int. Conf. on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2016) (Graz, Autriche, du 29/05/2016 au 03/06/2016).
Hannard, Florent ; Simar, Aude ; Pardoen, Thomas ; Maire, Eric. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. EMMC15 (Brussels, du 07/09/2016 au 09/09/2016).
Jimenez Mena, Norberto ; Jacques, Pascal ; Simar, Aude. Evaluation of the intermetallic fracture toughness in Al-to-steel welds performed by Friction Stir Welding and Friction Melt Bonding. Journées annuelles de la SF2M (Albi, France, du 25/10/2016 au 27/10/2016).
Santos Macias, Juan Guillermo ; Lani, Frédéric ; Jacques, Pascal ; Simar, Aude. Friction stir processing of AM parts. Additive manufacturing workshop Brussels (Brussels, Belgium, du 26/05/2016 au 27/05/2016).
Simar, Aude ; Delroisse, Pauline ; Bruzy, Nicolas ; Rigo, Olivier ; Jacques, Pascal ; Massart, Thierry. Impact of sandwich lattice structures processed by selective laser melting. EMMC15 – 15th European Mechanics of Materials Conference (Bruxelles, du 07/09/2016 au 09/09/2016).
Delroisse, Pauline ; Jacques, Pascal ; Rigo, Olivier ; Maire, Eric ; Simar, Aude. Influence of the scan speed on the microstructure of AlSi10Mg processed by additive manufacturing. Thermec 2016 (Graz, Austria, du 29/05/2016 au 03/06/2016).
Hannard, Florent ; Maire, Eric ; Pardoen, Thomas ; Simar, Aude. Microstructural heterogeneity effects on damage resistance of 6xxx series Aluminium alloys. 2016 EMI International Conference (Metz, France, du 25/10/2016 au 27/10/2016).
Ryelandt, Sophie ; Dompierre, B. ; Favache, Audrey ; Simar, Aude. Méthodologie d'identification du comportement élasto-viscoplastique de matériaux par nanoindentation. Colloque Indentation 2016 - Recueil présentations (Lille, du 12/10/2016 au 14/10/2016). In: Indentation 2016, 2016.
Mallmann, Camila ; Simar, Aude ; Ferrié, E. ; Fivel, Marc ; Lilleodden, E. T.. Plastic deformation mechanisms of magnesium matrix nanocomposites elaborated by friction stir processing. EMMC15 - 15th European Mechanics of Materials Conference (Brussels, Belgium, du 07/09/2016 au 09/09/2016).
Simar, Aude ; Jimenez Mena, Norberto ; Avettand Fénoël, Marie-Noëlle. Status and challenges of dissimilar metal welding. 11th International Friction Stir Welding Symposium (Cambridge, UK, du 17/05/2016 au 19/05/2016).
Jimenez Mena, Norberto ; Drezet, Jean-Marie ; Jacques, Pascal ; Simar, Aude. Thermomechanical modelling of dissimilar Friction Melt Bonding of AA6061 to Dual-phase steel: Prediction of solidification cracking and residual stresses. Thermec 2016 (Graz, Austria, du 29/05/2016 au 03/06/2016).
Delroisse, Pauline ; Rigo, Olivier ; Doneux, Catherine ; Wevers, Martine ; Godet, Stéphane ; Jacques, Pascal ; Simar, Aude. Aluminum lattice structures processed by additive manufacturing: microstructure and impact resistance. EUROMAT 2015 (Warsaw, Poland, du 20/09/2015 au 24/09/2015).
Bellanger, Philippe ; Simar, Aude ; Gorsse, Stéphane ; Jacques, Pascal. Combinatorial Approach Using Diffusion Couples as a Tool for the Optimization of Thermoelectric Materials. TMS2015, Alloys and Compounds for Thermoelectric and Solar Cell Applications III - Session V (Orlando, Florida, USA, du 15/03/2015 au 19/03/2015). In: Book of abstracts, 2015.
Pardoen, Thomas ; Yerra Sampath, Kumar ; Lecarme, Liza ; Scheyvaerts, Florence ; Kumar, Alok ; Martin, G. ; Chéhab, B. ; TEKOGLU, Cihan ; De Vleeschouwer, Christophe ; Jacques, Pascal ; Maire, Eric ; Mithieux ; Bréchet, Yves ; Véron, M. ; Onck, P. R. ; Simar, Aude ; Delannay, Laurent. Ductile damage and fracture in metallic alloys combining soft and hard phases. Plasticity'15 (Montego Bay, Jamaica, du 04/01/2015 au 09/01/2015).
Simar, Aude ; Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Pardoen, Thomas. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. EUROMAT 2015 (Warsaw, Poland, du 20/09/2015 au 24/09/2015).
Simar, Aude ; Hannard, Florent ; Maire, Eric ; Pardoen, Thomas. Effet of friction stir processing on the damage resistance of 6xxx series aluminium alloys. TMS2015, Symposium: Friction Stir Welding and Processing VIII (Orlando, Florida, USA, du 15/03/2015 au 19/03/2015). In: Book of abstracts, 2015.
Jimenez Mena, Norberto ; Crucifix, Stéphane ; Helal, Yazid ; van der Rest, Camille ; Boumerzoug, Zakaria ; Jacques, Pascal ; Simar, Aude. Friction Melt Bonding of Al6061 to Dual-Phase steel. Modelling and comparison to FSW for lap-joints. Workshop on Dissimilar Welding (Goin, France, 03/07/2015).
Gudla, Visweswara C. ; Jensen, Flemming ; Bordo, Kirill ; Simar, Aude ; Shabadi, Rajashekhara ; Ambat, Rajan. Friction stir processed Al-TiO2 surface composites: DC vs. High Frequency Pulse and Pulse Reverse Anodising. Eurocorr 2015 (Graz, Austria, du 06/09/2015 au 10/09/2015).
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Heterogeneity informed quantitative micromechanical approach of ductile fracture in 6xxx aluminium alloys. 4th Internatinal Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2015) (Cachan, France, du 03/06/2015 au 05/06/2015).
Delroisse, Pauline ; Rigo, Olivier ; Jacques, Pascal ; Simar, Aude. Influence de la vitesse laser et des traitements thermiques sur la microstructure d'échantillons d'AlSi10Mg obtenus par fabrication additive. SF2M - La métallurgie en fabrication additive (Arts et Métiers, ParisTech, France, du 18/11/2015 au 19/11/2015).
Ryelandt, Sophie ; Favache, Audrey ; Dompierre, Benoit ; François, Arnaud ; Simar, Aude. Mechanical properties of AuGe die-attach solder for electronic applications. EUROMAT 2015 (Warsaw, Poland, du 20/09/2015 au 24/09/2015).
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Mechanisms of plastic deformation of magnesium matrix nanocomposites developed by friction stir processing. EUROMAT 2015 (Warsaw, Poland, du 20/09/2015 au 24/09/2015).
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Mechanisms of plastic deformation of magnesium matrix nanocomposites elaborated by friction stir processing. Nanomechanical Testing in Materials Research and Development V (Albufeira, Portugal, du 04/10/2015 au 09/10/2015).
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Micromechanical modelling and in situ 3D microtomography characterization of microstructure heterogeneities effects on damage in aluminium alloys. 9th European Solid Mechanics Conference (ESMC 2015) (Leganés-Madrid, Spain, du 06/07/2015 au 10/07/2015).
Jimenez Mena, Norberto ; Simar, Aude ; Jacques, Pascal. Modelling and control of thermal cycles during dissimilar Friction Melt Bonding of Al6061 to Ultra-Low-Carbon Steel and their role in hot tearing. EUROMAT 2015 (Warsaw, Poland, du 20/09/2015 au 24/09/2015).
Jacques, Pascal ; van der Rest, Camille ; Bellanger, Philippe ; Roy, Geoffrey ; Simar, Aude. On the characterisation of ordering in Fe2VAl-based ternary Heusler Compounds. International Conference on Solid-Solid Phase Transformation in Inorganic Materials (PTM 2015) (Whistler, Canada, du 28/06/2015 au 03/07/2015).
van der Rest, Camille ; Bellanger, Philippe ; Roy, Geoffrey ; Simar, Aude ; Jacques, Pascal. On the interactions between recrystallisation and ordering phenomena in Fe2VAl-based Heusler Compounds. International Conference on Solid-Solid Phase Transformation in Inorganic Materials (PTM 2015) (Whistler, Canada, du 28/06/2015 au 03/07/2015).
Simar, Aude. Teaching an advanced processing course with hands-on projects. International Conference on Materials Education (Cambridge, UK, du 06/04/2015 au 11/04/2015).
Shabadi, Rajashekhara ; Avettand-Fènoël, Maire-Noëlle ; Simar, Aude ; Taillard, Roland. Arresting the grain growth of nano grains in Copper for effective heat evacuation applications. NANOSPD6 (Metz, France, du 30/06/2014 au 04/07/2014). In: Proceedings of NANOSPD6, 2014.
Simar, Aude ; Jimenez Mena, Norberto ; Jacques, Pascal ; van der Rest, Camille. Characterization of different Al-to-steel dissimilar welds using an innovative FSW-based process. 10th International Friction Stir Welding Symposium (Beijing, China, du 20/05/2014 au 22/05/2014). In: Proceedings of the 10th International Friction Stir Welding Symposium, 2014.
Delroisse, Pauline ; Marteleur, Matthieu ; Rigo, Olivier ; Doneux, Catherine ; Pyka, Grégory ; Wevers, Martine ; Jacques, Pascal ; Simar, Aude. Comparison of the impact resistance of honeycombs and LBM lattice structures. Workshop on Additive Manufacturing for space applications (European Space Agency (ESA), Noordwijk, Pays-Bas, du 28/10/2014 au 29/10/2014).
Avettand-Fènoël, M.-N. ; Simar, Aude ; Shabadi, R. ; Taillard, R. ; de Meester de Betzenbroeck, Bruno. Dispersion Strengthened Copper Elaborated by Friction Stir Processing. 10th International Friction Stir Welding Symposium (Beijing,China, du 20/05/2014 au 22/05/2014). In: Proceedings of the 10th International Friction Stir Welding Symposium, 2014.
van der Rest, Camille ; Simar, Aude ; Jacques, Pascal. Friction Melt Bonding: an innovative process for aluminium-steel lap joints. Friction Stir Welding and Processing FSWP 2014 (Nantes, France, 29/01/2014).
Simar, Aude ; Hannard, Florent ; Maire, Eric ; Pardoen, Thomas. Influence of microstructure heterogeneities on damage in 6xxx series aluminium alloys. International Conference on Aluminium Alloys (Trondheim, Norway, du 15/06/2014 au 19/06/2014).
Denquin, Anne ; Simar, Aude ; Gallais, Christophe ; de Meester de Betzenbroeck, Bruno ; Pardoen, Thomas ; Bréchet, Yves. Integrated modelling applied to process design: FSW of Aluminium alloys. TMS 2014 143rd Annual Meeting & Exhibition (San Diego, California, USA, du 16/02/2014 au 20/02/2014).
Gudla, Viswesvara ; Jensen, Flemming ; Bordo, Kirill ; Canulescu, Stela ; Ambat, Rajan ; Simar, Aude ; Shabadi, Rajashekhara. Microstructure and optical appearance of anodized friction stir processed Al- Metal oxide surface composites. Eurocorr 2014 (Pisa, Italy, du 08/09/2014 au 12/09/2014). In: Proceedings of the EUROCORR 2014, 2014.
Ambat, Rajan ; Gudla, Viswesvara ; Jensen, Flemming ; Canulescu, Stela ; Simar, Aude ; Shabadi, Rajashekhara ; Schou, Jorgen. Microstructure and optical appearance of friction stir processed and anodized Al- Metal oxide surface composites. 2nd International Congress on Anodizing Science and Technology (Sapporo, Hokkaido, Japan, du 04/06/2014 au 06/06/2014). In: Proceedings of the 2nd International Congress on Anodizing Science and Technology, 2014.
Gudla, Visweswara ; Jensen, Flemming ; Canulescu, Stela ; Simar, Aude ; Shabadi, Rajashekhara ; Schou, Jorgen ; Ambat, Rajan. Microstructure and optical appearance of friction stir processed and anodized Al-TiO2 surface composites. TMS 2014 143rd Annual Meeting & Exhibition (San Diego, California, USA, du 16/02/2014 au 20/02/2014).
Roy, Geoffrey ; van der Rest, Camille ; Michiels, Cécile ; Vinel, Mathieu ; Simar, Aude ; Jacques, Pascal. A global design approach for thermoelectric harvesting system. EUROMAT 2013 (Séville, Espagne, du 08/09/2013 au 13/09/2013).
van der Rest, Camille ; Simar, Aude ; Jacques, Pascal. An innovative process applied to the joining of steel to aluminum in a lap-joint configuration: thermal profile, microstructural evolution and lap-shear testing. BIL-NIL Lassymposium (Antwerpen, Belgique, du 26/11/2013 au 27/11/2013).
Pardoen, Thomas ; Simar, Aude ; Tekoglu, Cihan ; Lassance, Denis ; Fabrègue, D.. Applications of advanced micromechanics based ductile failure models Do we really need ail this complexity?. 2nd International Worshop on Physics Based Modeling of Materials Properties & Experimental Observation (Antalya, Turkey, du 15/05/2013 au 17/05/2013).
Jimenez Mena, Norberto ; Simar, Aude ; van der Rest, Camille ; Jacques, Pascal. Characterization of DP600-Al6061 dissimilar welds using an innovative FSW-based process to join Al to steel. 10th International Symposium on Friction Stir Welding (Beijing, China, du 20/05/2014 au 22/05/2014). In: Proceedings of the 10th International Symposium on Friction Stir Welding, 2013.
Simar, Aude ; van der Rest, Camille ; Jacques, Pascal. Friction Melt Bonding: An innovative process for aluminium-steel lap joints. Journées annuelles de la SF2M (Lille, France, du 29/10/2013 au 31/10/2013).
Simar, Aude ; van der Rest, Camille ; Jacques, Pascal. Friction Melt Bonding: an innovative process applied to the joining of steel to aluminum in a lap-joint configuration. Thermec 2013 (Las Vegas, USA, du 02/12/2013 au 06/12/2013).
van der Rest, Camille ; Simar, Aude ; Jacques, Pascal. Friction Melt Bonding: an innovative process applied to the joining of steel to aluminum in a lap-joint configuration. TMS 2013 (San Antonio, Texas, USA, du 03/03/2013 au 07/03/2013).
Mertens, Anne ; Simar, Aude ; Garray, Didier ; Halleux, Jacques ; Montrieux, Henri-Michel ; Lecomte-Beckers, Jacqueline. Friction Stir Processing of Magnesium Matrix Composites Reinforced with Carbon Fibres or Carbon Nanotubes. Thermec (Las Vegas, USA, du 02/12/2013 au 06/06/2013).
de Meester de Betzenbroeck, Bruno ; Jonckheere, Caroline ; Denquin, Anne ; Simar, Aude. Friction Stir Welding of AA6061 T6 to AA2014 T for an aeronautical application. IIW Congress (Singapore, du 08/07/2013 au 10/07/2013). In: Proceedings of the IIW Congress, 2013.
Simar, Aude. Friction stir mixing to process new composite materials. Conférence Collège de France (Paris, du 14/10/2013 au 14/02/2014).
Simar, Aude ; Nielsen, Kim ; Hannard, Florent ; Lecarme, Liza ; Pardoen, Thomas. Influence of the microstructure on the fracture strain of 6xxx series aluminium alloys. XII Int. Conf. Computational Plasticity (Barcelone, Espagne, du 03/09/2013 au 05/09/2013).
Simar, Aude ; Nielsen, Kim L. ; Lecarme, Liza ; Pardoen, Thomas. Influence of the microstructure on the fracture strain of 6xxx series aluminum alloys. TMS 2013 (San Antonio, Texas, USA, du 03/03/2013 au 07/03/2013).
Mertens, Anne ; Simar, Aude ; Garray, Didier ; Halleux, Jacques ; Montrieux, Henri-Michel ; Lecompte-Beckers, Jacqueline. Microstructure and Thermomechanical Behaviour of Magnesium - C nanotubes Composites produced by Friction Stir Processing. EUROMAT 2013 (Seville, du 08/09/2013 au 13/09/2013).
Simar, Aude ; Avettand-Fènoël, Marie-Noëlle ; Shabadi, Rajashekhara. Microstructure and mechanical properties of oxide dispersion strengthened copper produced by friction stir processing. TMS 2013 (San Antonio, Texas, USA, du 03/03/2013 au 07/03/2013).
Simar, Aude. Modélisation intégrée des procédés de soudage FSW. Innovation technologique Liliane Bettencourt (Collège de France, Paris).
van der Rest, Camille ; Roy, Geoffrey ; Simar, Aude ; Jacques, Pascal. On the Processing and Microstructure Optimisation of Fe2VAl-based Compounds for Low Grade Heat Harvesting. Thermec (Las Vegas, USA, du 02/12/2013 au 06/12/2013).
van der Rest, Camille ; Crucifix, Stéphane ; Simar, Aude ; Jacques, Pascal. On the joining of steel and aluminium by means of an innovative process. EUROMAT 2013 (Seville, Espagne, du 08/09/2013 au 13/09/2013).
van der Rest, Camille ; Roy, Geoffrey ; Simar, Aude ; Jacques, Pascal. Processing and microstructure optimisation of Fe2VAl-based compounds for thermoelectric applications. EUROMAT 2013 (Séville, Espagne, du 08/09/2013 au 13/09/2013).
Shabadi, Rajashekhara ; Avettand-Fènoël, Marie-Noëlle ; Simar, Aude ; Taillard, Roland ; Jain, P.K. ; Johnson, Roy. Thermal behavior of Friction Stir Processed Copper-Yttria nanostructured composites. Thermec (Las Vegas, USA, du 02/12/2013 au 06/12/2013).
van der Rest, Camille ; Makuanga, David-Henry ; Marchal-Marchant, Valentin ; Simar, Aude ; Jacques, Pascal. Thermomechanical processing of Fe2VAl-based compounds for thermoelectric applications. TMS 2013 (San Antonio, Texas, USA, du 03/03/2013 au 07/03/2013).
Simar, Aude. Composite manufacturing by friction stir welding. Journées annuelles SF2M (Paris, France, du 29/10/2012 au 31/10/2012).
Legrand, Nicolas ; Geurten, Alban ; Gioe, Dorian ; Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Simar, Aude. Dissimilar 2014T6-6061T6 welds: application, clamping device, non destructive examination. The 2nd International Conference on Friction Stir Welding and Processing (St Etienne, France, du 26/01/2012 au 27/01/2012). In: Proceedings of FSWP Conference, 2012.
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Simar, Aude. Effects of the high temperature mechanical relative strengths in dissimilar friction stir welds of 2014 to 6061 aluminum alloys. 9th International Symposium on Friction Stir Welding (Huntsville, Alabama, USA, du 15/05/2012 au 17/05/2012). In: Proceedings of the 9th International Symposium on Friction Stir Welding, 2012.
Mertens, Anne ; Simar, Aude ; Montrieux, Henri-Michel ; Halleux, Jacques ; Delannay, Francis ; Lecomte-Beckers, Jacqueline. Friction Stir Processing of Magnesium Matrix Composites reinforced with Carbon Fibres: Influence of the Matrix Characteristics and of the Processing Parameters on Microstructural Developments. 9th International Conference on Mg alloys and their Applications (Vancouver, Canada, du 08/07/2012 au 12/07/2012). In: Proceedings of the 9th International Conference on Mg alloys and their Applications, 2012.
Simar, Aude ; Nielsen, Kim L. ; Lecarme, Liza ; Pardoen, Thomas. Influence of the microstructure on the fracture strain of 6xxx series aluminum alloys. Seminar associated to the PhD defense of Katherina Teichmann (Trondheim, Norway, du 28/08/2012 au 30/08/2012).
Simar, Aude ; Mertens, Anne ; Montrieux, Henri-Michel ; Lecomte-Beckers, Jacqueline ; Halleux, Jacques ; Delannay, Francis. Microstructure and mechanical properties of friction stir processed magnesium matrix composites reinforced with carbon fibres. The 2nd International Conference on Friction Stir Welding and Processing (St Etienne, France, du 26/01/2012 au 27/01/2012). In: Proceedings of FSWP Conference, 2012.
Simar, Aude. Modélisation couplée du friction stir welding: un pas vers l'optimisation procédé/matériau. Séminaire organisé en l'honneur de Gilles Lapasset "Précipitation dans les alliages d'aluminium" (ONERA,Paris, janvier 2012).
Simar, Aude ; Nielsen, Kim L. ; Denquin, Anne ; Pardoen, Thomas. Damage mechanisms in 6xxx series aluminium alloys, application to friction stir welds. International Conference on Processing and Manufacturing of Advanced Materials - Thermec (Quebec City, Canada, du 01/08/2011 au 05/08/2011).
Simar, Aude ; Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno. Examples of innovations in dissimilar material joining. Journées annuelles de la Société Française de Métallurgie et de Matériaux (Nancy, du 04/07/2011 au 06/07/2011). In: Proceedings des Journées annuelles de la Société Française de Métallurgie et de Matériaux, 2011, 3 pages.
Simar, Aude. Innovations in Welding and Brazing. Journées annuelles de la SF2M (Nancy, France, du 04/07/2011 au 06/07/2011).
Bréchet, Yves ; Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Pardoen, Thomas. Integrated modelling for process optimization applied to friction stir welds in 6xxx series aluminium alloys. International Conference on Processing and Manufacturing of Advanced Materials - Thermec (Quebec City, Canada, du 01/08/2011 au 05/08/2011).
Avettand-Fènoël, Marie-Noëlle ; Simar, Aude ; Shabadi, Rajashekhara ; Taillard, Roland ; de Meester de Betzenbroeck, Bruno. Interest of friction stir processing for the development of graded oxide dispersion strengthened Cu based materials. 9th International Symposium on Friction Stir Welding (Huntsville, Alabama, USA, du 15/05/2012 au 17/05/2012). In: Proceedings of the 9th International Symposium on Friction Stir Welding, 2011.
Simar, Aude. Joining Methods. ARCHIMAT Doctoral Summer School (Autrans, France, du 23/05/2011 au 28/05/2011).
Pardoen, Thomas ; Scheyvaerts, Florence ; Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Tekoglu, Cihan ; Lecarme, Liza ; Fabrègue, D. ; Onck, P.R.. Micromechanical modelling of void nucleation, growth and coalescence in ductile solids with physics based hardening laws. 1st Cenaero workshop on Damage Tolerant Approaches (Gosselies, Belgium, du 07/09/2011 au 08/09/2011).
van der Rest, Camille ; Marchal-Marchant, Valentin ; Sinnaeve, Marc ; Simar, Aude ; Jacques, Pascal. Thermomechanical processing of Fe2VAl-based compounds for thermoelectric applications. Materials for Energy (Tallberg, Sweden, du 09/10/2011 au 14/10/2011).
van der Rest, Camille ; Ribesse, Arnaud ; Marchal-Marchant, Valentin ; Sinnaeve, Marc ; Clément, Nicolas ; Simar, Aude ; Jacques, Pascal. Thermomechanical processing of Fe2VAl-based compounds for thermoelectric applications. THERMEC 2011 (Quebec City, Canada, du 01/08/2011 au 05/08/2011).
Pardoen, Thomas ; Scheyvaerts, Florence ; Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; Yerra Sampath, Kumar ; Delannay, Laurent ; Tekoglu, Cihan ; Lecarme, Liza ; Fabrègue, Damien ; Onck, P.R.. Void growth and coalescence in ductile solids with physics based hardening laws. IAMI & CANMET Workshop - Microstructural effects on damage, fracture and crashworthiness in high performances automotive materials, CANMET - Materials (Hamilton, Ontario, Canada, du 10/05/2011 au 11/05/2011).
Simar, Aude ; van der Rest, Camille ; Jacques, Pascal. Aluminium-copper based architectured materials produced by friction stir processing and roll bonding (oral presentation). Hetmat Meeting (Isère, France, 2010).
Van Haver, Wim ; Geurten, Alban ; Defrancq, J. ; de Meester de Betzenbroeck, Bruno ; Simar, Aude. Characterisation of consecutive friction stir overlap welds in thick 2124 aluminium plate for build-up of flanges for aerospace applications. 8th International Symposium on Friction Stir Welding (Timmendorfer Strand, Germany, 2010). In: Proceedings of the 8th International Symposium on Friction Stir Welding, 2010.
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Simar, Aude. Flow patterns and mechanical properties of dissimilar friction stir welds joining 6061-T6 to 2014-T6 aluminium alloys. 8th International Symposium on Friction Stir Welding (Timmendorfer Strand, Germany, 2010). In: Proceedings of the 8th International Symposium on Friction Stir Welding, 2010.
Simar, Aude ; Bréchet, Yves ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Pardoen, Thomas. Integrated modeling of friction stir welding in 6xxx series aluminium alloys. 8th International Symposium on Friction Stir Welding (Timmendorfer Strand, Germany, 2010). In: Proceedings of the 8th International Symposium on Friction Stir Welding, 2010.
Simar, Aude ; Bréchet, Yves ; de Meester de Betzenbroeck, Bruno ; Denquin, A. ; Pardoen, Thomas. Multiphysics modeling of the microstructure evolution and the mechanical properties of friction stir welds in 6xxx series aluminium alloys. Advances in Materials and Processing Technologies (Paris, France, 2010).
Simar, Aude ; Pardoen, Thomas. Incorporating grain boundaries and precipitates into dislocation density-based work-hardening models. IAP Doctoral Winter School on Work Hardening (Leuven, Belgique, 04/02/2009).
Simar, Aude ; Bréchet, Yves ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Pardoen, Thomas. Integrated modeling of friction stir welding : from welding conditions to fracture strain. 12th International Congress on Fracture, ICF12 (Ottawa, Canada). In: Proceedings of the 12th International Congress on Fracture, 2009, p. paper # T46.009.
De Vuyst, T. ; Madavan, V. ; Ducoeur, Benjamin ; Simar, Aude ; de Meester de Betzenbroeck, Bruno ; D'Alvise, L.. A predictive thermo-fluid/thermo-mechanical modelling approach for computing temperature cycles and residual stresses in FSW. 7th International symposium friction Stir Welding (Awaji Island, Japan, 20-22 may 2008). In: Final Proceedings of the 7th International symposium friction Stir Welding, 2008.
Simar, Aude. Etude des propriétés locales et globales en traction de soudures par fraction-malaxage de l'alliage 6005A. MECAMAT (Aussois, France, 2008).
Van Haver, Wim ; Deplus, Kevin ; de Meester de Betzenbroeck, Bruno ; Simar, Aude ; Van Daele, W. ; Defrancq, J. ; Dhooge, Alfred. Friction stir butt welding of thin 5754-F111 sheet for aerospace applications. 7th International Symposium on Friction Stir Welding (Awaji island, Japan, 2008). In: Proceedings of the 7th International Symposium on Friction Stir Welding, 2008.
Simar, Aude ; Bréchet, Y. ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Pardoen, Thomas. An integrated approach of precipitation and local mechanical properties in friction stir welds in aluminium alloy 6005A-T6. European Congress and Exhibition on Advanced Materials and Processes - Euromat'07 (Nuremberg, Germany, du 10/09/2007 au 13/09/2007).
Simar, Aude ; Lee, Hyon-Jee ; Wirth, Brian. Investigation of the Dislocation Interaction with Voids and Helium Bubbles in Nickel Using Molecular Dynamics. EUROMAT (2007).
Mertens, Anne ; Storti, M. ; Dedry, O. ; Montrieux, H.-M. ; Lecomte-Berckers, J. ; Simar, Aude. Thermal treatments for tailoring the microstructure and wear behaviour of friction stir processed Al-C fibres composites. FiMPART'17 (Bordeaux, France, du 10/07/2017 au 12/07/2017).
Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Bréchet, Yves ; Pardoen, Thomas. Local and global mechanical properties of friction stir welds in Al 6005A. 7th National Congress on Theorical and Applied Mechanics (Mons, May 29-30, 2006). In: Proceedings of the 7th National Congress on Theorical and Applied Mechanics, 2006.
Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Bréchet, Yves ; Pardoen, Thomas. Microstructural evolution and local mechanical properties evolution throughout friction stir welds in Al 6005A. 6th International Symposium on Friction Stir Welding (Saint-Sauveur, Montréal, Canada, October 10-13). In: Proceedings of the 6th International Symposium on Friction Stir Welding, 2006.
de Meester de Betzenbroeck, Bruno ; Simar, Aude ; Pardoen, Thomas. Modelling temperature histories in friction stir welding including material convection effects. 7th International Conference on "Trends in Welding Research" (Pine Mountain, Georgia, USA, May 16-20 2005). In: Trends in Welding Research - 7th International Conference on "Trends in Welding Research", ASM International, 2006.
Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Bréchet, Yves ; Pardoen, Thomas. Local and Global Properties of Friction Stir Welds in AA6005A. BIL-NIL Lassymposium (Gent, Belgium, November 29-30). In: Proceedings of the BIL-NIL Lassymposium, 2005.
Simar, Aude ; Pardoen, Thomas ; de Meester de Betzenbroeck, Bruno. Modeling Friction Stir Welding. Invited Seminar at the University of South Carolina (Columbia (SC), USA, 2005).
de Meester de Betzenbroeck, Bruno ; Simar, Aude ; D'Alvise, L. ; De Vuyst, T. ; Pierret, S.. Finite Element Modelling of Friction Stir Welding of Aluminium Alloy Plates. IIW Pre-Assembly Joint Meeting of Commissions III and IX on Friction Stir Welding (Nagoya, Japan, July 9 2004). In: Proceedings, 2004.
Simar, Aude ; Pardoen, Thomas ; de Meester de Betzenbroeck, Bruno. Influence of friction stir welding parameters on the power input and the temperature distribution in aluminium alloys. 5th International Symposium on Friction Stir Welding (Metz, France, 2004). In: Proceedings of the 5th International Symposium on Friction Stir Welding, 2004.
De Vuyst, T. ; D'Alvise, L. ; Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Pierret, Stéphane. Inverse Analysis using a Genetic Algorithm for the Finite Element Modeling of Friction Stir Welding. 5th International Symposium on Friction Stir Welding (Metz, France, 2004). In: Proceedings of the 5th International Symposium on Friction Stir Welding, 2004.
Gallais, Christophe ; Denquin, Anne ; Pic, Aurélien ; Simar, Aude ; Pardoen, Thomas ; Bréchet, Yves. Modeling the Relationship between Process Parameters - Microstructural Evolutions and Mechanical Behaviour in a Friction Stir Welded 6XXX Aluminium Alloy. 5th International Symposium on Friction Stir Welding (Metz, France, 2004). In: Proceedings of the 5th International Symposium on Friction Stir Welding, 2004.
Simar, Aude. Modélisation des effets des cycles thermomécaniques sur les propriétés mécaniques des joints en aluminium soudés par Friction-Malaxage. Approche multi-échelle (poster). Cours : Local approach to fracture (Roscoff, France, 2004).
Simar, Aude ; de Meester de Betzenbroeck, Bruno. Modelling the Laser Welding of Aluminium alloys. 6th National Congress on Theoretical and Applied Mechanics (Gent, 2003). In: Proceedings of the 6th National Congress on Theoretical and Applied Mechanics, 2003, p. paper 104.
Simar, Aude. A multiscale multiphysics investigation of aluminum friction stir welds : from thermal modelling to mechanical properties through precipitation evolution and hardening/, prom. : Pardoen, Thomas ; de Meester, Bruno, 2006-07-17.
Jacques, Pascal ; van der Rest, Camille ; Simar, Aude. Method for Welding at least two layers. Numéro de priorité ; Déposé (29/04/2013) ; Publié (07/11/2013). AE, AG, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, HN, HR, HU, ID, IL, IN, IS, JP, KE, KG, KM, KN, KP, KR, KZ, LA, LC, LK, LR, LS, LT, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SC, SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW.
Jacques, Pascal ; Simar, Aude ; van der Rest, Camille ; Matagne, Ernest ; Roy, Geoffrey ; Shmitz, Alain. Thermoelectric conversion module and method for making it. Numéro de priorité ; Déposé (29/04/2013) ; Publié (07/11/2013). AE, A, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, HN, HR, HU, ID, IL, IN, IS, JP, KE, KG, KM, KN, KP, KR, KZ, LA, LC, LK, LR, LS, LT, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SC, SD, SE, SG, SK, SL, SM, ST, SV, SY TH, TJ, TM, TN, TR, TT, TZ, UA, US, UZ, VC, VN, ZA, ZM, ZW.