IMAP
Place Sainte Barbe 2/L5.02.02
1348 Louvain-la-Neuve
- Accueil
- Répertoire
- Aude Simar
Aude Simar
Professeure
Since 2013 : Professor at Université catholique de Louvain.
Dec 2012 : Habilitation (HDR) at the University Lille1, France
2007- 2013 : Research associate FNRS (Fonds de la Recherche Scientifique) based in the Material Science Departement of the Université catholique de Louvain (UCL), Louvain-la-Neuve, Belgium
2006- 2007 : Post-doctoral stay at University of California at Berkeley (UCB), California, USA under the direction of Prof. Brian Wirth
2002- 2006 : Thesis at the Université catholique de Louvain under the direction of Prof. Bruno de Meester (Mechanics departement) and Thomas Pardoen (Material Science departement)
2004 : Extended Studies diploma (DEA)
1997-2002 : Mechanical Engineer at Université catholique de Louvain (UCL), Louvain-la-Neuve, Belgium
Editorial Comitee
Since Nov. 2011 : Associate Editor for the international journal by Elsevier “Materials Characterization”, impact factor =4.5 (2022) – in charge of the edition of papers on “Light metals and alloys” (~350 papers/year) + Principal editor for a special issue in the journal published in 2018.
Since Dec. 2013 : Member of the editorial board of the journal “Welding in the World”
Since Jan. 2023: Editorial board member of the journal “International Material Reviews” with an impact factor = 16.1 (2022) – in charge of “structural materials”.
Conference organisation
Organization and associated to the organizing committee of the conference FSWP.
2013, 2016, 2018, 2020: Member of the executive Committee for the international conference Thermec.
Oct. 2015: Main organizer of the Euromech Colloqium 570, Houffalize, Belgium.
March 2018, May 2020 (cancelled), April 2022, April 2024: Additive manufacturing session organizer for the “European Conference on Mechanics of Materials” EMMC
July 2018: co-organizer of the “International conference on Experimental mechanics” (Brussels, Belgium), and additive manufacturing session organizer.
Sept. 2019: Main organizer of FSWP2019, Louvain-la-Neuve, Belgium.
Oct. 2020: Session organizer for International Conference on Aluminium Alloys.
July 2021: Euromech colloquium on Metal additive manufacturing.
August 2023: MEALOR II, 2 week doctoral course on “Fracture mechanics and damage” in Banyuls-sur-mer, France
Administrative commissions
Since 2016: Administrative committee of Technocampus (Belgium)
Since 2019: Administrative committee of the Belgian Welding Institute
Since 2024: Administrative committee of AILouvain
UCLouvain internal commitements
2018-2021 : Head of IMAP Laboratory of the iMMC institute
2020-2021: Head of the mechanical engineering diploma commission
Since 2021: Technical vice-president of the institute iMMC
Awards
2003: 1st price at the end of study work competition for the 2002 promotion of engineers out of UCL (AILouvain competition)
2013: Soete price of the Belgian Welding Institute
- Diplômes
Année Label Institution 1999 Candidate ingénieur civil Université catholique de Louvain 2002 Ingénieur civil mécanicien Université catholique de Louvain 2004 Diplômée d'études approfondies en sciences appliquées Université catholique de Louvain 2006 Docteur en sciences appliquées Université catholique de Louvain
Some relevant videos on the labs of the course LMECA1451:
https://www.youtube.com/watch?v=n-kbfZBiSLE
Admission exam:
Équation trigonométrique | Résolution 02 | Avec la Professeure Simar (youtube.com)
Vulgarisation for young students attraction to space: https://www.myspacejob.be/jobs/ingenieure-en-mecanique-des-structures
- Les cours
- Coming up talks: https://esaform24.fr/plenary-speakers/Topics:- dissimilar welding: friction stir welding and Friction Melt Bonding- Friction Stir Processing- additive manufacturing (Laser Powder Bed Fsuion, Wire Arc Additive Manufacturing and Additive Friction Stir Deposition)- metal matrix compositesPhD thesis supervision2008-2012 : Caroline Jonckheere (with co-supervisor Prof. Bruno de Meester). Title : Friction stir welding of dissimilar 2014-6061 aluminum alloys.2010- 2015: Camille van der Rest (with co-supervisor Prof. Pascal Jacques). Title : Physico-chemical characterization of Fe-V-Al alloys and their production as micro-architectured structures for thermoelectric applications.2013-2016: Camila Mallmann (with Marc Fivel, Emilie Ferrié from INP Grenoble and Erica Lilleodden from Helmholtz-Zentrum, Geesthacht), PhD thesis that was mainly performed at INP Grenoble. Title: Mechanisms of plastic deformation of magnesium matrix nanocomposites.2013-2018 : Florent Hannard (with co-supervisor Prof. Thomas Pardoen). Title: 3D characterization, modelling and tailoring of microstructure heterogeneity effects on damage and fracture of 6xxx aluminium alloys.2013-2018: Norberto Jimenez-Mena (with co-supervisor Prof. Pascal Jacques). Title : Optimisation of an innovative process to weld Al-to-steel: from microstructure evolution to mechanical .2014-2018: Pauline Delroisse (with co-supervisor Prof. Pascal Jacques). Title: AlSi10Mg lattice structures produced by Selective Laser Melting: From microstructure characterization to impact resistance2016-2021: Guillermo Santos. Title: Laser powder bed fusion AlSi10Mg damage and fatigue resistance improvement by post-processing2017-2021: Corentin Velard (with J.J. Blandin, E. Ferié and V. Roche, co-supervision with University Grenoble). Title: Design of the microstructure of bio-resorbable alloys2017-2022: Mariia Arseenko (with co-supervisor Hosni Idrissi). Title: Design, friction stir processing and characterization of a new healable aluminium alloy.2017-2022: Matthieu Lezaack. Title: Fracture of 7xxx aluminium alloys with tailored friction stir processed microstructures.2018-2022: Nelson Netto. Title: Enhanced internal stress aided fatigue resistance in friction stir processed Al/NiTi composites.2018-2022: Julie Gheysen. Title: Design, development and characterisation of new healable aluminium alloys for laser powder bed fusion.2019-2022: Nicolas Dimov (with co-supervisor E. Charkaluk, Ecole Polytechnique, Paris, France). Title: Dissimilar Al6061 to Al7075 friction stir welds: processing, static and fatigue properties.2019-2023: Vincent Voet (with co-supervisor Prof. Thomas Pardoen). Title: Fatigue resistance of space application brazing joints (Sn-Pb-Ag).2020-: Nicolas Nothomb. Title: Improving the fatigue life of 7075 Al alloy produced by laser powder bed fusion.2021-: Sanjay Channappa Krishnamurthy. Title: Friction melt bonding of Ti-Al dissimilar welds.2022-: Sophie De Raedemacker (with co-supervisor F. Hannard). Title: Design and characterisation of a new self-healing high strength aluminium alloy produced by additive manufacturing.2023-: Rafael Nunes (jointed PhD with UGent and BWI – Wim De Waele). Title: WAAM of high strength aluminium alloys, process optimization, microstructure and mechanical properties.2023-: Hector Sepulveda (jointed PhD with ULiège – Anne-Marie Habraken). Title: Predicting the microstructure and mechanical properties of AlMg alloys to optimize their composition and healing potential.2023-: Arnaud Radermecker (jointed PhD with ULiège - Jean-Philippe Ponthot). Title: Modelling the mechanical behavior by finite elements squared combined with machine learning of Al alloys processed by Laser Powder Bed Fusion2023-: Simon Van Roy (with co-supervisor Bruno Dehez). Title: Design by topological optimization and manufacturing by Laser Powder Bed Fusion of a Fe-Si electrical motor.2023-: Julien Longin (jointed PhD with Ecole Royale Militaire – Luc Rabet). Title: Laser Powder Bed Fusion of high strength aluminium alloys and their behaviour at high strain rates.2023-: Mohammed Farag. Title: Development of healable lattice structures processed by Laser Powder Bed Fusion and their mechanical properties2023-: Matthieu Jadot. Title: Production of parts from recycled materials and healing of 7xxx series aluminum cavities produced by Additive Friction Stir Deposition.2024-: Edoardo Pedrinazzi (jointed PhD with ULiège - Davide Ruffoni). Title: Mechanical behavior of the trabecular bone analyzed by in-situ X-ray tomography and Digital Volume Correlation.2024-: Mohamed Amine Ezziati (PhD mostly performed at Thermofisher company). Title: Artificial intelligence for X-ray tomography image analysis of Laser Powder Bed Fusion healable aluminum alloys.Post-doc supervision:2015-2016: Didier Bardel. Topic: Behavior of 6xxx series Al alloys subjected to strain path changes.2018-2019: Chunjie Huang. Topic: Improving ductility of Ti6Al4V by Friction stir processing.2017- 2019: Lv Zhao: Topic: Crack deviation in Al alloys by Friction stir processing.2017-2019: Lipeng Ding. Topic: Transmission electron microscopy characterization of materials developed by friction stir based processes.2017- 2021: Thaneshan Sapanathan. Topic: Intermetallic growth and failure mitigation in innovative dissimilar metal joints between Al and steel.2021-2022: Jishuai Li. Topic: Microstructural engineering for optimized gradient structured aluminium produced by friction stir additive manufacturing2019-2023: Florent Hannard. Topic: Architectured materials processed by Friction Stir Processing and Additive Manufacturing.2020-2023: Ankush Kashiwar. Topic: Transmission electron microscopy characterization of materials developed by friction stir based processes and additive manufacturing.2019-: Grzegorz Pyka. Topic: 3D X-ray tomography characterization of materials developed by friction stir based processes and additive manufacturing.2023-: Romain Gautier. Topic: Transmission electron microscopy characterization of materials of healable aluminum alloys.2023-: Gabrielle Tiphene. Topic: Mechanical behavior at cryogenic temperature of high strength aluminum alloys processed by Laser Powder Bed Fusion
2024
Song, Lubin ; Zhao, Lv ; Ding, Lipeng ; Zhu, Yaxin ; Liang, Shuang ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. How heterogeneous microstructure determines mechanical behavior of laser powder bed fusion AlSi10Mg. In: Materials Science and Engineering: A, Vol. 909, p. 146845 (2024). doi:10.1016/j.msea.2024.146845.
2024
van der Rest, Camille ; De Raedemacker, Sophie ; Pyka, Grzegorz ; Simar, Aude. Improving the fatigue life of laser powder bed fusion Scalmalloy® by friction stir processing. In: Materials & Design, Vol. 244, no.113193, p. 1-12 (2024). doi:10.1016/j.matdes.2024.113193.
2024
Fernandez, Eduardo ; Lacroix, Martin ; Février, Simon ; Zhang, Tianyu ; Papeleux, Luc ; Bobach, Billy Joe ; Boman, Romain ; Ryelandt, Sophie ; Simar, Aude ; Ponthot, Jean-Philippe. Modelling melt pool dynamics in aluminium-to-steel welds performed by Friction Melt Bonding: a challenge addressed with the Particle Finite Element Method. In: Computational Particle Mechanics, (2024) (Soumis).
2024
Fernández, Eduardo ; Lacroix, Martin ; Février, Simon ; Zhang, Tianyu ; Papeleux, Luc ; Bobach, Billy-Joe ; Boman, Romain ; Ryelandt, Sophie ; Simar, Aude ; Ponthot, Jean-Philippe. Modelling melt pool dynamics in aluminium-to-steel welds performed by friction melt bonding: a challenge addressed with the particle finite element method. In: Computational Particle Mechanics, Vol. online (2024). doi:10.1007/s40571-024-00852-6.
2024
Kashiwar, Ankush ; Arseenko, Mariia ; Simar, Aude ; Idrissi, Hosni. On the role of microstructural defects on precipitation, damage, and healing behavior in a novel Al-0.5Mg2Si alloy. In: Materials and Design, Vol. 239, p. 112765 (2024). doi:10.1016/j.matdes.2024.112765.
2024
Li,Jishuai ; Jadot, Matthieu ; Xie, Jichang ; Lezaack, Matthieu Baudouin ; Sapanathan, Thaneshan ; Gautier, Romain ; Rachik, Mohamed ; Simar, Aude. Process parameters selection for multi-layer friction surfacing of 7075 aluminium alloy. In: Science and Technology of Welding and Joining (Print), Vol. online (2024) (2024). doi:10.1177/13621718241275092.
2024
Voet, Vincent ; De Fruytier, Christophe ; Pardoen, Thomas ; Simar, Aude. Solder Joint Geometry Effects on Thermomechanical Fatigue Lifetime of End-Capped Chip Component Assemblies. In: IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 14, no.1, p. 130-139 (2024). doi:10.1109/tcpmt.2024.3350184.
2023
Gomes Nunes Silva, Rafael ; Faes, Koen ; De Waele, Wim ; Simar, Aude ; Verlinde, Wim ; Lezaack, Matthieu Baudouin ; Sneyers, Wout ; Arnhold, Julius. A Review on the Weldability of Additively Manufactured Aluminium Parts by Fusion and Solid-State Welding Processes. In: Metals, Vol. 13, no. 10, p. 1724 - 1760 (2023). doi:10.3390/met13101724.
2023
Krishnamurthy, Sanjay Channappa ; Arseenko, Mariia ; Kashiwar, Ankush ; Dufour, Philippe ; Marchal, Yves ; Delahaye, Jocelyn ; Idrissi, Hosni ; Pardoen, Thomas ; Mertens, Anne ; Simar, Aude. Controlled precipitation in a new Al-Mg-Sc alloy for enhanced corrosion behavior while maintaining the mechanical performance. In: Materials Characterization, Vol. 200, p. 112886 (2023). doi:10.1016/j.matchar.2023.112886.
2023
Song, Lubin ; Yuan, Shulin ; Zhao, Lv ; Zhu, Yaxin ; Liang, Shuang ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Deciphering phase stress partition and its correlation to mechanical anisotropy of laser powder bed fusion AlSi10Mg. In: Additive Manufacturing, Vol. 71, p. 103594 (2023). doi:10.1016/j.addma.2023.103594.
2023
Raoelison, R.N. ; Li, J. ; Sapanathan, T. ; Favache, Audrey ; Simar, Aude ; Rachik, M.. Effect of the nanopores in the Al-Cu intermetallic phase on nanoindentation instabilities at the Al/Cu interface of a magnetic pulse impact weld. In: Materialia, Vol. 32, p. 101955 (2023). doi:10.1016/j.mtla.2023.101955.
2023
Gheysen, Julie ; Tingaud, David ; Villanova, Julie ; Hocini, Azziz ; Simar, Aude. Exceptional fatigue life and ductility of new liquid healing hot isostatic pressing especially tailored for additive manufactured aluminum alloys. In: Scripta Materialia, Vol. 233, p. 115512 (2023). doi:10.1016/j.scriptamat.2023.115512.
2023
Han, Sutao ; Lezaack, Matthieu Baudouin ; Pyka, Grzegorz ; Gomes Affonseca Netto, Nelson ; Simar, Aude ; Wahab, Magd Abdel ; Hannard, Florent. On the Competition between Intergranular and Transgranular Failure within 7xxx Al Alloys with Tailored Microstructures. In: Materials, Vol. 16, no.10, p. 3770 (2023). doi:10.3390/ma16103770.
2023
Dimov, Nicolas ; Weisz-Patrault, Daniel ; Tanguy, Alexandre ; Sapanathan, Thaneshan ; Benoist, Julien ; Charkaluk, Eric ; Simar, Aude. Strain and damage analysis using high resolution digital image correlation in the stir zone of an AA6061-AA7075 dissimilar friction stir weld. In: Materials Today Communications, Vol. 34, p. 105359 (2023). doi:10.1016/j.mtcomm.2023.105359.
2023
Gheysen, Julie ; Kashiwar, Ankush ; Idrissi, Hosni ; Villanova, Julie ; Simar, Aude. Suppressing hydrogen blistering in a magnesium-rich healable laser powder bed fusion aluminum alloy analyzed by in-situ high resolution techniques. In: Materials & Design, Vol. 231, p. 112024 (2023). doi:10.1016/j.matdes.2023.112024.
2023
Gomes Nunes Silva, Rafael ; Verlinde, Wim ; Faes, Koen ; Simar, Aude ; Lezaack, Matthieu Baudouin. WAAM (Wire Arc Additive Manufacturing) van Aluminiumlegeringen met Hoge Sterkte. In: Metallerie, Vol. on line (2023).
2023
Gomes Nunes Silva, Rafael ; Verlinde, Wim ; Faes, Koen ; Simar, Aude ; Lezaack, Matthieu Baudouin. Waam van aluminium legeringen met hoge sterkte. WAALU-Onderzoeksproject. In: Metallerie (French Edition) : revue professionelle pour l'industrie metalliere, Vol. online (2024).
2022
Arseenko, Mariia ; Hannard, Florent ; Ding, Lipeng ; Zhao, Lv ; Maire, Eric ; Villanova, Julie ; Idrissi, Hosni ; Simar, Aude. A new healing strategy for metals: Programmed damage and repair. In: Acta Materialia, Vol. 238, p. 118241 (2022). doi:10.1016/j.actamat.2022.118241.
2022
Avettand-Fènoël, M.-N. ; Gomes Affonseca Netto, Nelson ; Simar, Aude ; Marinova, M. ; Taillard, R.. Design of a metallic glass dispersion in pure copper by friction stir processing. In: Journal of Alloys and Compounds, Vol. 907, p. 164522 (2022). doi:10.1016/j.jallcom.2022.164522.
2022
Lezaack, Matthieu Baudouin ; Simar, Aude ; Marchal, Yannick ; Steinmetz, Martin ; Faes, Koen ; Saraiva Esteves Pacheco De Almeida, João. Dissimilar friction welding of NiTi shape memory alloy and steel reinforcing bars for seismic performance. In: Science and Technology of Welding and Joining, Vol. 27, no. 6, p. 418-428 (2022). doi:10.1080/13621718.2022.2061692.
2022
Santos Macías, Juan Guillermo ; Zhao, Lv ; Tingaud, David ; Bacroix, Brigitte ; Pyka, Grzegorz ; van der Rest, Camille ; Ryelandt, Laurence ; Simar, Aude. Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties. In: Journal of Materials Science, Vol. Special issue on Additive Manufacturing (2022). doi:10.1007/s10853-022-07027-9.
2022
Voet, Vincent ; Van Loock, Frederik ; De Fruytier, Christophe ; Simar, Aude ; Pardoen, Thomas. Machine learning aided modelling of thermomechanical fatigue of solder joints in electronic component assemblies. In: International Journal of Fatigue, Vol. 167, p. 107298 (2022). doi:10.1016/j.ijfatigue.2022.107298.
2022
Song, Lubin ; Zhao, Lv ; Ding, Lipeng ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg. In: Materials Science and Engineering: A, Vol. 832, p. 142484 (2022). doi:10.1016/j.msea.2021.142484.
2022
Ding, Lipeng ; Sapanathan, Thaneshan ; Schryvers, Dominique ; Simar, Aude ; Idrissi, Hosni. On the formation of antiphase boundaries in Fe4Al13 intermetallics during a high temperature treatment. In: Scripta Materialia, Vol. 215, p. 114726 (2022). doi:10.1016/j.scriptamat.2022.114726.
2022
Zhao, Lv ; Song, Lubin ; Santos Macias, Juan Guillermo ; Zhu, Yaxin ; Huang, Minsheng ; Simar, Aude ; Li, Zhenhuan. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg. In: Additive Manufacturing, Vol. 56, p. 102914 (2022). doi:10.1016/j.addma.2022.102914.
2022
Heidarzadeh, Akbar ; Mohammadzadeh, Roghayeh ; Jafarian, Hamid Reza ; Pruncu, Catalin ; Simar, Aude. Role of geometrically necessary dislocations on mechanical properties of friction stir welded single-phase copper with medium stacking fault energy. In: Journal of Materials Research and Technology, Vol. 16, p. 194-200 (2022). doi:10.1016/j.jmrt.2021.11.162.
2022
Lezaack, Matthieu Baudouin ; Hannard, Florent ; Simar, Aude. Understanding the ductility versus toughness and bendability decoupling of large elongated and fine grained Al 7475 - T6 alloy. In: Materials Science and Engineering: A, Vol. 839, p. 142816 (2022). doi:10.1016/j.msea.2022.142816.
2021
Lezaack, Matthieu Baudouin ; Simar, Aude. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments. In: Materials Science and Engineering: A, Vol. 807, p. 140901 (2021). doi:10.1016/j.msea.2021.140901.
2021
Jiménez Mena, Norberto ; Sapanathan, Thaneshan ; Jacques, Pascal ; Simar, Aude. Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds. In: Engineering Fracture Mechanics, Vol. 249, no. 107756 (2021). doi:10.1016/j.engfracmech.2021.107756.
2021
Poncelet, Olivier ; Marteleur, Matthieu ; van der Rest, Camille ; Rigo, O. ; Adrien, J. ; Dancette, Sylvain ; Jacques, Pascal ; Simar, Aude. Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion. In: Additive Manufacturing, Vol. 38, p. 101801 (2021). doi:10.1016/j.addma.2020.101801.
2021
Gheysen, Julie ; Marteleur, Matthieu ; van der Rest, Camille ; Simar, Aude. Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy. In: Materials & Design, Vol. 199, p. 109433 (2021). doi:10.1016/j.matdes.2020.109433.
2021
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Buffière, Jean-Yves ; Van Hooreweder, Brecht ; Simar, Aude. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions. In: Materials & Design, Vol. 210, p. 110084 (2021). doi:10.1016/j.matdes.2021.110084.
2021
Heidarzadeh, A. ; Mironov, S. ; Kaibyshev, R. ; Çam, G. ; Simar, Aude ; Gerlich, A. ; Khodabakhshi, F. ; Mostafaei, A. ; Field, D.P. ; Robson, J.D. ; Deschamps, A. ; Withers, P.J.. Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution. In: Progress in Materials Science, Vol. 117, p. 100752 (2021). doi:10.1016/j.pmatsci.2020.100752.
2021
Sapanathan, Thaneshan ; Sabirov, Ilchat ; Xia, Peikang ; Monclus, Miguel ; Molina-Aldareguia, Jon M ; Jacques, Pascal ; Simar, Aude. High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. In: Scripta Materialia, Vol. 200, no. 113910 (2021). doi:10.1016/j.scriptamat.2021.113910.
2021
Avettand-Fènoël, Marie-Noëlle ; Sapanathan, Thaneshan ; Pirling, Thilo ; Racineux, Guillaume ; Simar, Aude ; Drezet, Jean-Marie. Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction. In: Journal of Manufacturing Processes, Vol. 68, p. 1758-1766 (2021). doi:10.1016/j.jmapro.2021.06.071.
2021
Lefebvre, Williams ; Rose, Grégory ; Delroisse, Pauline ; Baustert, Eric ; Cuvilly, Fabien ; Simar, Aude. Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy. In: Materials & Design, Vol. 197, p. 109264 (2021). doi:10.1016/j.matdes.2020.109264.
2021
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Hou, Yuliang ; Simar, Aude ; Rachik, Mohamed. On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations. In: Journal of Materials Processing Technology, Vol. 296, no. 117185 (2021). doi:10.1016/j.jmatprotec.2021.117185.
2021
Huang, Chunjie ; Arseenko, Mariia ; Zhao, Lv ; Xie, Yingchun ; Elsenberg, Andreas ; Li, Wenya ; Gärtner, Frank ; Simar, Aude ; Klassen, Thomas. Property prediction and crack growth behavior in cold sprayed Cu deposits. In: Materials & Design, Vol. 206, p. 109826 (2021). doi:10.1016/j.matdes.2021.109826.
2021
Lezaack, Matthieu ; Hannard, Florent ; Zhao, Lv ; Orekhov, Andrey ; Adrien, Jérôme ; Miettinen, Arttu ; Idrissi, Hosni ; Simar, Aude. Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments. In: Materialia, Vol. 20, p. 101248 (2021). doi:10.1016/j.mtla.2021.101248.
2021
Zhao, Lv ; Santos Macias, Juan Guillermo ; Douillard, Thierry ; Li, Zhenhuan ; Simar, Aude. Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions. In: Materials Science and Engineering: A, Vol. 807, p. 140845 (2021). doi:10.1016/j.msea.2021.140845.
2020
Zhao, Lv ; Santos Macias, Juan Guillermo ; Dolimont, Adrien ; Simar, Aude ; Rivière-Lorphèvre, Edouard. Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. In: Additive Manufacturing, Vol. 36, p. 101499 (2020). doi:10.1016/j.addma.2020.101499.
2020
Simar, Aude ; Hannard, Florent ; Lezaack, Matthieu Baudouin ; Santos Macias, Juan Guillermo ; Zhao, Lv ; Pyka, Grzegorz. Extended durability for high strength aluminium alloys. In: The Innovation Patform, Vol. on line (2020).
2020
Santos Macias, Juan Guillermo ; Douillard, Thierry ; Zhao, Lv ; Maire, Eric ; Pyka, Grzegorz ; Simar, Aude. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg. In: Acta Materialia, Vol. 201, p. 231-243 (2020). doi:10.1016/j.actamat.2020.10.001.
2020
Simar, Aude. Lightening the load of aluminium alloys. In: EU Researcher, Vol. Summer 2020, p. 59 (2020).
2020
Gomes Affonseca Netto, Nelson ; Zhao, Lv ; Soete, Jeroen ; Pyka, Grzegorz ; Simar, Aude. Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach. In: Journal of Materials Processing Technology, Vol. 283, p. 116722 (2020). doi:10.1016/j.jmatprotec.2020.116722.
2019
Sapanathan, Thaneshan ; Jimenez-Mena, Norberto ; Sabirov, Ilchat ; Monclús, Miguel A. ; Molina-Aldareguia, Jon ; Xia, Peikang ; Zhao, Lv ; Simar, Aude. A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. In: Journal of Materials Science & Technology, Vol. 35, no. 9, p. 2048-2057 (2019). doi:10.1016/j.jmst.2019.05.004.
2019
Zhao, Lv ; Santos Macias, Juan Guillermo ; Ding, Lipeng ; Idrissi, Hosni ; Simar, Aude. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. In: Materials Science and Engineering: A, Vol. 764, p. 138210 (2019). doi:10.1016/j.msea.2019.138210.
2019
Santos Macias, Juan Guillermo ; Elangeswaran, Chola ; Zhao, Lv ; Van Hooreweder, Brecht ; Adrien, Jérôme ; Maire, Eric ; Buffière, Jean-Yves ; Ludwig, Wolfgang ; Jacques, Pascal ; Simar, Aude. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing. In: Scripta Materialia, Vol. 170, p. 124-128 (2019). doi:10.1016/j.scriptamat.2019.05.044.
2019
Huang, Chunjie ; Yan, Xingchen ; Zhao, Lv ; Liu, Min ; Ma, Wenyou ; Wang, Weibing ; Soete, Jeroen ; Simar, Aude. Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing. In: Materials Science and Engineering: A, Vol. 755, p. 85-96 (2019). doi:10.1016/j.msea.2019.03.133.
2019
Jimenez-Mena, Norberto ; Jacques, Pascal ; Ding, Lipeng ; Gauquelin, Nicolas ; Schryvers, Dominique ; Idrissi, Hosni ; Delannay, Francis ; Simar, Aude. Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers. In: Materials Science and Engineering: A, Vol. 740-741, p. 274-284 (2019). doi:10.1016/j.msea.2018.10.101.
2019
Zhao, Lv ; Ding, Lipeng ; Soete, Jeroen ; Idrissi, Hosni ; Kerckhofs, Greet ; Simar, Aude. Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness. In: Composites Part A: Applied Science and Manufacturing, Vol. 126, p. 105617 (2019). doi:10.1016/j.compositesa.2019.105617.
2019
Li, Jishuai ; Sapanathan, Thaneshan ; Raoelison, Rija Nirina ; Zhang, Zhan ; Chen, X.-Grant ; Marceau, Daniel ; Simar, Aude ; Rachik, Mohamed. Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics. In: Materials Letters, Vol. 249, p. 177-179 (2019). doi:10.1016/j.matlet.2019.04.094.
2019
Jimenez-Mena, Norberto ; Simar, Aude ; Jacques, Pascal. On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers. In: Materials & Design, Vol. 180, p. 107958 (2019). doi:10.1016/j.matdes.2019.107958.
2019
Jimenez mena, Norberto ; Sapanathan, Thaneshan ; Drezet, Jean-Marie ; Pirling, Thilo ; Jacques, Pascal ; Simar, Aude. Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction. In: Journal of Materials Processing Technology, Vol. 266, p. 651-661 (2019). doi:10.1016/j.jmatprotec.2018.11.030.
2019
Mallmann, C. ; Hannard, Florent ; Ferrié, E. ; Simar, Aude ; Daudin, R. ; Lhuissier, P. ; Pacureanu, A. ; Fivel, M.. Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites. In: Materials Science and Engineering: A, Vol. 764, p. 138170 (2019). doi:10.1016/j.msea.2019.138170.
2018
Amani, Yasin ; Dancette, Sylvain ; Delroisse, Pauline ; Simar, Aude ; Maire, Eric. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches. In: Acta Materialia, Vol. 159, p. 395-407 (2018). doi:10.1016/j.actamat.2018.08.030.
2018
Simar, Aude ; Godet, Stéphane ; Watkins, Thomas R.. Highlights of the special issue on metal additive manufacturing. In: Materials Characterization, Vol. 143, p. 1-4 (2018). doi:10.1016/j.matchar.2018.06.013.
2018
Simar, Aude ; Mertens, Anne ; Ryelandt, Sophie ; Delannay, Francis ; Brassart, Laurence. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. In: Materials Science and Engineering: A, Vol. 723, p. 324-333 (2018). doi:10.1016/j.msea.2018.03.043.
2018
Jimenez Mena, Norberto ; Jacques, Pascal ; Drezet, Jean-Marie ; Simar, Aude. On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 49, no. 7, p. 2692-2704 (2018). doi:10.1007/s11661-018-4618-z.
2018
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. In: Acta Materialia, Vol. 148, p. 456-466 (2018). doi:10.1016/j.actamat.2018.02.003.
2017
Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas ; Simar, Aude. Ductilization of aluminium alloy 6056 by friction stir processing. In: Acta Materialia, Vol. 130, p. 121-136 (2017). doi:10.1016/j.actamat.2017.01.047.
2017
Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier ; Simar, Aude. Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. In: Scripta Materialia, Vol. 141, p. 32-35 (2017). doi:10.1016/j.scriptamat.2017.07.020.
2017
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Influence of Y2O3 nanoparticles on the twinning of single crystalline magnesium. In: Scripta Materialia, Vol. 138, p. 79-82 (2017). doi:10.1016/j.scriptamat.2017.05.016.
2017
Simar, Aude ; Avettand-Fènoël, Marie-Noëlle. State of the art about dissimilar metal friction stir welding. In: Science and Technology of Welding and Joining (Print), Vol. 22, no. 5, p. 389-403 (2017). doi:10.1080/13621718.2016.1251712.
2016
Avettand-Fènoël, Marie-Noëlle ; Simar, Aude. A review about Friction Stir Welding of metal matrix composites. In: Materials Characterization, Vol. 120, p. 1-17 (2016). doi:10.1016/j.matchar.2016.07.010.
2016
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Le Bourlot, C. ; Mokso, Rajmund ; Simar, Aude. Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys. In: Acta Materialia, Vol. 103, p. 558-572 (2016). doi:10.1016/j.actamat.2015.10.008.
2016
Mas, Fanny ; Martin, Guilhem ; Lhuissier, Pierre ; Bréchet, Yves ; Tassin, Catherine ; Roch, François ; Simar, Aude. Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 667, p. 156-170 (2016). doi:10.1016/j.msea.2016.04.082.
2015
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Bordo, Kirill ; Simar, Aude ; Ambat, Rajan. Effect of High Frequency Pulsing on the Interfacial Structure of Anodized Aluminium-TiO2. In: Journal of the Electrochemical Society, Vol. 162, no. 7, p. C303-C310 (March 2015). doi:10.1149/2.0311507jes.
2015
Gudla, Visweswara Chakravarthy ; Jensen, Flemming ; Simar, Aude ; Shabadi, Rajashekhara ; Ambat, Rajan. Friction Stir Processed Al-TiO2 Surface Composites: Anodizing Behaviour and Optical Appearance. In: Applied Surface Science, Vol. 324, p. 554-562 (2015). doi:10.1016/j.apsusc.2014.10.151.
2015
Gudla, Visweswara Chakravarthy ; Bordo, Kirill ; Jensen, Flemming ; Canulescu, Stela ; Yuksel, Serkan ; Simar, Aude ; Ambat, Rajan. High frequency anodising of aluminium–TiO2 surface composites: Anodising behaviour and optical appearance. In: Surface and Coatings Technology, Vol. 277, p. 67-73 (2015). doi:10.1016/j.surfcoat.2015.07.035.
2015
Mertens, Anne ; Simar, Aude ; Adrien, Jérôme ; Maire, Eric ; Montrieux, Henri-Michel ; Delannay, Francis ; Lecomte-Beckers, Jacqueline. Influence of Fibre Distribution and Grain Size on the Mechanical Behaviour of Friction Stir Processed Mg-C Composites. In: Materials Characterization, Vol. 107, p. 125-133 (2015). doi:10.1016/j.matchar.2015.07.010.
2015
Crucifix, S. ; van der Rest, Camille ; Jimenez Mena, Norberto ; Jacques, Pascal ; Simar, Aude. Modelling thermal cycles and intermetallic growth during friction melt bonding of ULC steel to aluminium alloy 2024-T3. In: Science and Technology of Welding and Joining, Vol. 20, no. 4, p. 319-324 (2015). doi:10.1179/1362171815Y.0000000020.
2015
Shabadi, Rajashekhara ; Avettand-Fènoël, Marie Noëlle ; Simar, Aude ; Taillard, Roland ; Jain, P.K. ; Johnson, Roy. Thermal conductivity in yttria dispersed copper. In: Materials & Design, Vol. 65, p. 869-877 (2015). doi:10.1016/j.matdes.2014.09.083.
2014
Avettand-Fènoël, M.-N. ; Simar, Aude ; Shabadi, R. ; Taillard, R. ; de Meester de Betzenbroeck, Bruno. Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing. In: Materials & Design, Vol. 60, p. 343-357. doi:10.1016/j.matdes.2014.04.012.
2014
Lecarme, Liza ; Maire, Eric ; K.C., Amit Kumar ; De Vleeschouwer, Christophe ; Jacques, Laurent ; Simar, Aude ; Pardoen, Thomas. Heterogenous void growth revealed by in situ 3-D X-ray mocrotomography using automatic cavity tracking. In: Acta Materialia, Vol. 63, p. 130-139. doi:10.1016/j.actamat.2013.10.014.
2014
van der Rest, Camille ; Jacques, Pascal ; Simar, Aude. On the joining of steel and aluminium by means of a new friction melt bonding process. In: Scripta Materialia, Vol. 77, p. 25-28 (2014). doi:10.1016/j.scriptamat.2014.01.008.
2013
Sonne, M.R. ; Tutum, C.C. ; Hattel, Jasper ; Simar, Aude ; de Meester de Betzenbroeck, Bruno. The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3. In: Journal of Materials Processing Technology, Vol. 213, no.3, p. 477-486 (March 2013). doi:10.1016/j.jmatprotec.2012.11.001 (Accepté/Sous presse).
2013
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Simar, Aude. Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061-T6 and 2014-T6 aluminum alloys. In: Journal of Materials Processing Technology, Vol. 213, no. 6, p. 826-837 (2013). doi:10.1016/j.jmatprotec.2013.01.001.
2012
Mertens, Anne ; Simar, Aude ; Delannay, Francis. C Fibres - Mg Matrix Composites Produced by Squeeze Casting and Friction Stir Processing: Microstructure & Mechanical Behaviour. In: Materials Science Forum, Vol. 706-709, p. 1221-1226 (2012). doi:10.4028/www.scientific.net/MSF.706-709.1221.
2012
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Simar, Aude. Dissimilar friction stir welding of 2014 to 6061 Aluminum Alloys. In: Advanced Materials Research, Vol. 409, p. 269-274 (2012). doi:10.4028/www.scientific.net/AMR.409.269.
2012
Simar, Aude ; Bréchet, Yves ; de Meester de Betzenbroeck, Bruno ; Denquin, Anne ; Gallais, Christophe ; Pardoen, Thomas. Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties. In: Progress in Materials Science, Vol. 57, no. 1, p. 95-183 (2012). doi:10.1016/j.pmatsci.2011.05.003.
2011
Jacquin, Dimitri ; de Meester de Betzenbroeck, Bruno ; Simar, Aude ; Deloison, Dominique ; Montheillet, F. ; Desrayaud, C.. A simple Eulerian thermomechanical modeling of friction stir welding. In: Journal of Materials Processing Technology, Vol. 211, no. 1, p. 57-65 (2011). doi:10.1016/j.jmatprotec.2010.08.016.
2011
Jonckheere, Caroline ; de Meester de Betzenbroeck, Bruno ; Cassiers, Cédric ; Delhaye, Martin ; Simar, Aude. Fracture and mechanical properties of friction stir spot welds in 6063-T6 aluminum alloy. In: International Journal of Advanced Manufacturing Technology, Vol. 62, no. 5-8, p. 569-575 (septembre 2012). doi:10.1007/s00170-011-3795-3.
2011
Fribourg, G. ; Bréchet, Yves ; Deschamps, A. ; Simar, Aude. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy. In: Acta Materialia, Vol. 59, no. 9, p. 3261-3635 (may 2011). doi:10.1016/j.actamat.2011.02.035.
2011
Simar, Aude ; Lee Voigt, Hyon-Jee ; Wirth, Brian D.. Molecular dynamics simulations of dislocation interaction with voids in nickel. In: Computational Materials Science, Vol. 50, no. 4, p. 1811-1817 (2011). doi:10.1016/j.commatsci.2011.01.020.
2011
Deplus, Kevin ; Simar, Aude ; Van Haver, W. ; de Meester de Betzenbroeck, Bruno. Residual stresses in aluminium alloy friction stir welds. In: International Journal of Advanced Manufacturing Technology, Vol. 56, p. 493-504 (2011). doi:10.1007/s00170-011-3210-0.
2010
Simar, Aude ; Jonckheere, Caroline ; Deplus, K. ; Pardoen, Thomas ; de Meester de Betzenbroeck, Bruno. Comparing similar and dissimilar friction stir welds of 2017-6005A aluminium alloys. In: Science and Technology of Welding and Joining, Vol. 15, no. 3, p. 254-259 (2010). doi:10.1179/136217110X12665048207737.
2010
Simar, Aude ; Nielsen, K. L. ; de Meester, B. ; Tvergaard, V. ; Pardoen, Thomas. Micro-mechanical modelling of ductile failure in 6005A aluminium using a physics based strain hardening law including stage IV. In: Engineering Fracture Mechanics, Vol. 77, no. 13, p. 2491-2503 (2010). doi:10.1016/j.engfracmech.2010.06.008.
2010
Nielsen, K. L. ; Pardoen, Thomas ; Tvergaard, V. ; de Meester, B. ; Simar, Aude. Modelling of plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law. In: International Journal of Solids and Structures, Vol. 47, no. 18-19, p. 2359-2370 (2010). doi:10.1016/j.ijsolstr.2010.03.019.
2010
Pardoen, Thomas ; Scheyvaerts, F. ; Simar, Aude ; Tekoglu, Cihan ; Onck, P.. Multiscale modelling of ductile failure in metallic alloys. In: Comptes rendus. Physique, Vol. 11, no. 3-4, p. 326-345 (2010). doi:10.1016/j.crhy.2010.07.012.
2010
Simar, Aude ; Nielsen, K.L. ; Tvergaard, V. ; de Meester de Betzenbroeck, Bruno ; Pardoen, Thomas. Strain hardening and damage in 6xxx series aluminium alloy friction stir welds. In: Materials Science Forum, Vol. 638-642, p. 333-338 (2010). doi:10.4028/www.scientific.net/MSF.638-642.333.
2010
Simar, Aude ; Nielsen K. ; de Meester de Betzenbroeck, Bruno ; Pardoen, Thomas ; Tvergaard, V.. Strain hardening and damage in 6xxx series aluminum alloy friction stir welds. In: Materials Science Forum, Vol. 638-642, p. 333-338 (2010).
2008
Simar, Aude ; Brechet, Y. ; de Meester, B. ; Denquin, A. ; Pardoen, Thomas. Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 486, no. 1-2, p. 85-95 (2008). doi:10.1016/j.msea.2007.08.041.
2007
Simar, Aude ; Pardoen, Thomas ; de Meester, B.. Effect of rotational material flow on temperature distribution in friction stir welds. In: Science and Technology of Welding and Joining, Vol. 12, no. 4, p. 324-333 (2007). doi:10.1179/174329307X197584.
2007
Gallais, C. ; Simar, Aude ; Fabregue, D. ; Denquin, A. ; Lapasset, G. ; de Meester, B. ; Brechet, Y. ; Pardoen, Thomas. Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 38A, no. 5, p. 964-981 (2007). doi:10.1007/s11661-007-9121-x.
2007
Simar, Aude ; Brechet, Y. ; de Meester, B. ; Denquin, A. ; Pardoen, Thomas. Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6. In: Acta Materialia, Vol. 55, no. 18, p. 6133-6143 (2007). doi:10.1016/j.actamat.2007.07.012.
2006
Simar, Aude ; Lecomte-Beckers, J ; Pardoen, Thomas ; de Meester, B.. Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding. In: Science and Technology of Welding and Joining, Vol. 11, no. 2, p. 170-177 (2006). doi:10.1179/174329306X84409.
2005
De Vuyst, T. ; D'Alvise, L. ; Simar, Aude ; de Meester de Betzenbroeck, Bruno ; Pierret, Stéphane. Finite Element Modelling of Friction Stir Welding of Aluminium alloy Plates - Inverse Analysis using a Genetic Algorithm. In: Welding in the World, Vol. 49, no. 3/4, p. 12 (2005).
2023
Besson, Jacques ; Bleyer, Jérémy ; Feldt-Payet, Sylvia ; Gourgues-Lorenzon, Anne-Françoise ; Hannard, Florent ; Helfer, Thomas ; Hure, Jérémy ; Kondo, Djimedo ; Lazarus, Véronique ; Le Bourlot, Christophe ; Maitournam, Habibou ; Maurini, Carrado ; Moes, Nicolas ; Morgeneyer, Thilo ; Morin, Léo ; Petit, Tom ; Simar, Aude. MEALOR II : Damage Mechanics and Local Approach to Fracture, By-nc-sa 2023 by MEALOR II (Zenodo), 2023. doi:10.5281/zenodo.10125169.
2023
Hannard, Florent ; Simar, Aude ; Morgeneyer, Thilo. Ductile fracture in metals: mechanisms and characterization. In: A collective work, MEALOR II. Damage Mechanics and Local Approach to Fracture, By-nc-sa 2023 by MEALOR II, 2023, p. 421.
2022
Simar, Aude ; Poncelet, Olivier ; Desrayaud, Christophe ; Eimer, Eloise. Les microstructures des alliages d'aluminium. In: Sous la direction de Peyre, Patrice & Charkaluk, Eric, La fabrication additive des alliages métalliques 2 - microstructures, post-traitements et propriétés d'usage, 2022, p. 79-92. 9781789480559.
2022
Arseenko, Mariia ; Gheysen, Julie ; Hannard, Florent ; Nothomb, Nicolas ; Simar, Aude. Self-Healing in Metal-Based Systems. In: Kanellopoulos, Antonios, Engineering Materials and Processes : Self-Healing Construction Materials, Springer, 2022, p. 43-78. 9783030868796. doi:10.1007/978-3-030-86880-2_3.
2019
Simar, Aude ; Avettand-Fenoël, Marie-Noëlle. Friction Stir Processing for Architectured Materials. In: Estrin Y., Bréchet Y., Dunlop J., Fratzl P. (eds), Architectured Materials in Nature and Engineering (Springer Series in Materials Science; 282), Springer, Cham, 2019, p. 195-229. 978-3-030-11941-6. doi:10.1007/978-3-030-11942-3_7.
2013
Jacques, Pascal ; van der Rest, Camille ; Simar, Aude. Method for Welding at least two layers. Numéro de priorité ; Déposé (29/04/2013) ; Publié (07/11/2013). AE, AG, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, HN, HR, HU, ID, IL, IN, IS, JP, KE, KG, KM, KN, KP, KR, KZ, LA, LC, LK, LR, LS, LT, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SC, SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW.
2013
Jacques, Pascal ; Simar, Aude ; van der Rest, Camille ; Matagne, Ernest ; Roy, Geoffrey ; Shmitz, Alain. Thermoelectric conversion module and method for making it. Numéro de priorité ; Déposé (29/04/2013) ; Publié (07/11/2013). AE, A, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, HN, HR, HU, ID, IL, IN, IS, JP, KE, KG, KM, KN, KP, KR, KZ, LA, LC, LK, LR, LS, LT, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SC, SD, SE, SG, SK, SL, SM, ST, SV, SY TH, TJ, TM, TN, TR, TT, TZ, UA, US, UZ, VC, VN, ZA, ZM, ZW.